Electrical Design Engineer

Senior Planning & Designing Engineer

Company: Hello Power Private Limited

Location: Bengaluru

Experience: 4–5 Years

Qualification: B.E./B.Tech./M.Tech – EEE

Joining: Immediate Joiners Preferred

Key Responsibilities:

• Electrical planning, designing, and detailed engineering.
• Prepare and review SLDs, electrical layouts, schematics, and drawings.
• Prepare load schedules, cable schedules, BOQ, and material specifications.
• Perform electrical calculations, equipment selection, and system design.
• Coordinate with Project, Procurement, Estimation, and Site Engineering teams.
• Review drawings and ensure compliance with applicable electrical standards.
• Provide technical support for site execution and design modifications.

Required Skills:

• Strong knowledge of Electrical Planning & Designing.
• Proficiency in AutoCAD and electrical design software.
• Knowledge of HT/LT systems, transformers, panels, cables, earthing, and protection systems.
• Good understanding of electrical calculations, BOQ, and technical documentation.
• Strong communication, coordination, and problem-solving skills.

Preferred: Candidates from Bengaluru / Karnataka with relevant project experience and immediate/short notice availability.

ROLE SUMMARY:

An experienced, hands-on engineering role owning the electrical and electronics hardware content of motor-drive and sensor systems. The Electrical / Electronics / Instrumentation Engineer is responsible for power distribution and motor-drive power-stage design, sensor interface boards, and taking boards through EMI/EMC compliance, with full ownership of schematic capture and layout from concept to fab-ready.

RESPONSIBILITIES:

• Design power distribution and the motor-drive power stage (gate drives, current sense, H-bridge/inverter stages)
• Implement supervised discrete-line circuitry per IF-08 ICD requirements
• Design sensor interface boards (resolver, encoder, analog/digital signal conditioning)
• Take boards through EMI/EMC compliance for MIL-STD-461
• Own schematic capture and layout in Altium or KiCad end-to-end, from concept to fab ready.

REQUIRED QUALIFICATIONS

• B.E./B.Tech/M.E./M.Tech. in Electrical, Electronics & Communication, Electronics & Instrumentation, or any other relevant field.
• 4-8 years of relevant experience.

KEY COMPETENCIES

• Hands-on power electronics: gate driver design, current sensing, protection circuitry
• Analog signal conditioning for sensor front-ends (resolver, encoder, LVDT-class signals)
• Practical EMI/EMC design experience, ideally against MIL-STD-461 or equivalent (automotive/industrial EMC also considered)
• Strong Altium or KiCad skills — layout discipline for power + mixed-signal boards.
• Prior work on ICD-driven or interface-controlled discrete I/O circuitry
• Defence, aerospace, or automotive electronics background

Key Responsibilities

• Develop creative interior design concepts based on client requirements, functionality, aesthetics, budget, and timelines.
• Create mood boards, material palettes, space plans, 2D drawings, presentations, and design proposals.
• Coordinate 3D visualizations, renders, walkthroughs, furniture designs, materials, finishes, and specifications.
• Handle client meetings, present concepts, incorporate feedback, and maintain strong client relationships.
• Coordinate with architects, contractors, vendors, and site teams to ensure smooth project execution.
• Conduct site visits, monitor quality and design execution, and resolve on-site design challenges.
• Prepare BOQs, specifications, project documentation, material approvals, and progress reports.

Required Skills

• Strong design sensibility with excellent presentation, communication, and client-facing skills.
• Good knowledge of furniture, materials, finishes, fabrics, stones, metals, veneers, and laminates.
• Ability to manage multiple projects and coordinate effectively with internal and external stakeholders.

Software Skills

• AutoCAD
• SketchUp
• 3ds Max / V-Ray (preferred)
• Lumion / Enscape
• Adobe Photoshop
• Microsoft PowerPoint & Excel

Job Description

We are looking for a creative and detail-oriented Interior Designer to join our team. The ideal candidate will have a minimum of 1 year of professional experience in residential and commercial interior design projects, with strong knowledge of space planning, material selection, furniture layouts, and execution detailing.

Required Skills

• Proficiency in AutoCAD, SketchUp, and rendering software.
• Strong understanding of space planning, furniture detailing, lighting, and material selection.
• Knowledge of site execution, measurements, and technical detailing.
• Ability to manage multiple projects and meet deadlines.
• Strong communication, presentation, and client coordination skills.

Key Responsibilities

• Prepare interior layouts, mood boards, working drawings, and 3D visualizations using AutoCAD, SketchUp, and rendering software.
• Develop creative design concepts based on client requirements and project themes.
• Prepare detailed furniture layouts, ceiling plans, electrical layouts, and material specifications.
• Coordinate with vendors, contractors, and site teams for smooth project execution.
• Ensure designs meet functionality, aesthetics, and budget requirements.
• Maintain proper documentation of drawings, revisions, and material selections.

Eligibility Criteria

• Bachelor’s Degree/Diploma in Interior Design or related field.
• Minimum 1 year of relevant work experience in residential and commercial interior projects.
• Portfolio of previous work will be an added advantage.

Role Overview

We are looking for an experienced MEP Site Engineer to supervise and coordinate MEP works for corporate and commercial interior projects.

Key Responsibilities

• Supervise MEP installation and execution at project sites.
• Coordinate electrical, HVAC, plumbing, fire-fighting, and other MEP services.
• Review MEP drawings and ensure proper site execution.
• Coordinate with MEP consultants, contractors, vendors, and other project teams.
• Monitor site progress and ensure work is completed as per schedule.
• Inspect the quality of MEP installations.
• Identify and resolve technical and site coordination issues.
• Coordinate MEP works with civil and interior activities.
• Conduct site inspections and measurements.
• Prepare daily/weekly progress reports.
• Ensure compliance with project specifications and safety requirements.

Required Skills

• Strong knowledge of MEP services and site execution.
• Ability to read and understand MEP drawings.
• Good knowledge of electrical/HVAC/plumbing/fire-fighting works.
• Strong coordination and communication skills.
• Experience in corporate/commercial interior projects is preferred.

Position

Senior Lead Architect

Company

PencilSketch Design Studio LLP

Job Location

• Bangalore (On-site)
• Hyderabad (On-site)

Role Overview

The company is looking for an experienced Senior Lead Architect to lead interior corporate office design projects from concept to completion, including:

• Planning and space planning
• Detailed design
• Client, consultant, and contractor coordination
• Project management
• Team leadership and mentoring
• Ensuring project quality and timelines

Key Requirements

• Senior-level Architect with experience in corporate/workplace interiors
• Strong knowledge of:
• Architecture
• Interior Design
• Space Planning
• Project Coordination
• Proficiency in:
• AutoCAD
• SketchUp
• V-Ray
• Enscape
• Other rendering software
• Excellent communication, leadership, and client-handling skills

Employment Details

• Full-time
• On-site
• Immediate joiners preferred
• Candidates can choose either Bangalore or Hyderabad as their preferred work location.

CAD

Job Title: CAD Design Engineer, Mechanical & Code-First Reverse Engineering

Location: Gurugram | Bengaluru| Hyderabad | Pune (On-site)

Type: Full-Time

Experience: 5+ years

About the Role

We are seeking an experienced CAD professional with strong expertise in 3D modelling, part and assembly design, and technical drafting. In this role, you will create and refine high-quality CAD models and engineering drawings, develop robust design workflows, and collaborate with engineering teams to deliver accurate, manufacturable, and production-ready designs.

What You'll Do

● Create and review data grounded in real CAD and mechanical design practice, parts, assemblies, drawings, and the reasoning behind them.

● Reverse-engineer geometry: take an STL/mesh with no feature history and reconstruct the design intent as parametric, code-first CAD (build123d), inferring sketches, features, datums, patterns, and key dimensional relationships.

● Evaluate AI-generated design solutions, 3D models, feature trees, mating strategies, drawings, and pin down failure cases, edge cases, and quality gaps.

● Decompose complex modelling and verification tasks into structured, step-by-step workflows the model can learn from and be measured against.

Domain Responsibilities

● Build and assess parametric models, assemblies, and detailed 2D drawings across machined, sheet-metal, cast/moulded, and weldment parts.

● Judge design intent, constraints, and robustness, modelling approach. ● Apply and check GD&T, tolerancing, and design-for-manufacturing across the full product design lifecycle (concept → detailing → design review → handoff).

● Validate code-first reconstructions against source geometry via deviation and dimensional-accuracy checks.

Requirements

Must Have

● B.E./B.Tech/M.Tech/Ph.D in Mechanical Engineering (or closely related) from a Tier 1/Tier 2 institute (IIT, NIT, BITS, IIIT, DTU/NSUT, or equivalent).

● 5+ years of hands-on CAD/mechanical design with breadth across multiple platforms (Autodesk Fusion, SolidWorks, Creo, NX, CATIA, or Inventor), multiple part types, and the full design workflow.

● Strong command of parametric modelling, assembly design, engineering drawings, GD&T, and DFM.

● Working Python ability and genuine comfort with code-first CAD (build123d / CadQuery), or a clear track record of picking up scripting fast.

Good to Have

● Mesh processing (trimesh, Open3D, numpy-stl) and familiarity with OpenCascade/OCCT.

● Exposure to adjacent disciplines, surfacing, simulation-driven design, generative/topology optimization, or CAM handoff.

● PLM/PDM and configuration management.

Job Title : BIM / Digital Engineering Professional

Experience : 4 to 6 Years

Location : Noida / Gurugram / Ahmedabad

Employment Type : Full-Time

Job Overview :

We are looking for experienced BIM / Digital Engineering Professionals with 4 to 6 years of relevant experience in Building Information Modeling (BIM), 3D modeling, multidisciplinary coordination, digital construction, or BIM automation.

The ideal candidate should have hands-on experience with one or more BIM tools, such as Autodesk Revit, Navisworks, Civil 3D, Tekla Structures, Synchro, Dynamo, or Revit API, and the ability to support engineering, construction, and infrastructure projects.

Mandatory Skills :

Revit, Navisworks, Civil 3D, Tekla Structures, Synchro 4D/5D, Dynamo, Python, C#, Revit API, BIM Modeling, Clash Detection, Model Coordination, Quality Assurance

Key Responsibilities :

• Develop, maintain, and coordinate BIM models across architectural, structural, civil, and MEP disciplines.
• Create and update 3D models, construction drawings, and technical documentation using Autodesk Revit.
• Perform clash detection, model coordination, and design reviews using Navisworks.
• Develop civil infrastructure models, alignments, grading, and related designs using Civil 3D.
• Prepare structural models, fabrication drawings, and documentation using Tekla Structures.
• Support 4D BIM workflows by linking 3D models with construction schedules and project timelines.
• Assist with 5D BIM implementation, quantity takeoffs, and cost integration.
• Develop and optimize BIM automation workflows using Dynamo, Python, C#, or Revit API.
• Conduct model quality checks and ensure compliance with project requirements and BIM standards.
• Collaborate with architects, engineers, contractors, and project stakeholders to resolve design and coordination issues.
• Prepare BIM coordination reports, model review documentation, and project deliverables.

Required Skills & Qualifications :

• Bachelor's degree in Civil Engineering, Architecture, Structural Engineering, Mechanical Engineering, or a related discipline.
• 4 to 6 years of relevant experience in BIM, digital engineering, 3D modeling, or BIM coordination.
• Hands-on proficiency in one or more of the following tools:
• Autodesk Revit
• Autodesk Navisworks
• Autodesk Civil 3D
• Tekla Structures
• Synchro 4D/5D
• Dynamo, Python, C#, or Revit API
• Strong understanding of BIM modeling, multidisciplinary coordination, clash detection, and model quality assurance.
• Ability to interpret engineering drawings, technical specifications, and project requirements.
• Strong problem-solving, communication, collaboration, and technical coordination skills.

Preferred Skills :

• Familiarity with ISO 19650 standards and BIM Execution Plans (BEP).
• Experience with Autodesk Construction Cloud (ACC) or other Common Data Environments (CDEs).
• Knowledge of 4D/5D BIM, construction sequencing, quantity takeoffs, and digital construction workflows.
• Experience working on EPC, infrastructure, commercial, industrial, or large-scale construction projects.
• Relevant Autodesk or BIM certifications.

Relevant Candidate Profiles :

• BIM Coordinator
• BIM Specialist
• BIM Engineer
• Revit Specialist
• Navisworks Specialist
• Civil 3D Engineer
• Tekla Structures Engineer
• 4D/5D BIM Engineer
• BIM Automation Engineer
• Digital Engineering Professional

Note : Candidates with hands-on expertise in at least one relevant BIM tool or specialization are encouraged to apply. The requirement is not limited to candidates proficient in all listed tools.

Role Overview

We are looking for an experienced MEP Site Engineer to supervise and coordinate MEP works for corporate and commercial interior projects.

Key Responsibilities

• Supervise MEP installation and execution at project sites.
• Coordinate electrical, HVAC, plumbing, fire-fighting, and other MEP services.
• Review MEP drawings and ensure proper site execution.
• Coordinate with MEP consultants, contractors, vendors, and other project teams.
• Monitor site progress and ensure work is completed as per schedule.
• Inspect the quality of MEP installations.
• Identify and resolve technical and site coordination issues.
• Coordinate MEP works with civil and interior activities.
• Conduct site inspections and measurements.
• Prepare daily/weekly progress reports.
• Ensure compliance with project specifications and safety requirements.

Required Skills

• Strong knowledge of MEP services and site execution.
• Ability to read and understand MEP drawings.
• Good knowledge of electrical/HVAC/plumbing/fire-fighting works.
• Strong coordination and communication skills.
• Experience in corporate/commercial interior projects is preferred. 

Job Description:

The Billing Engineer is responsible for preparing, verifying, and processing all billing related to construction projects. This includes client billing, subcontractor billing, material reconciliation, and cost tracking. The role requires close coordination with the project management team, site engineers, quantity surveyors, procurement, and accounts departments to ensure timely and accurate financial documentation.

• Key Responsibilities:Preparation of Client Bills:
• Measure and verify quantities executed on-site.
• Prepare Running Account (RA) bills and final bills as per contract terms.
• Coordinate with clients/consultants for bill approval.

• Subcontractor Billing:
• Validate subcontractor invoices against actual work done.
• Maintain records of work orders, agreements, and payment terms.

• Quantity and Cost Verification:
• Cross-check quantities from drawings and site execution.
• Reconcile materials received, used, and stored.

• Rate Analysis:
• Support rate analysis for extra/deviated items.
• Ensure billing is as per BOQ (Bill of Quantities), DSR (Daily Schedule of Rates), or agreed rates.

• Documentation & Reporting:
• Maintain accurate billing logs, payment records, and reports.
• Assist in monthly project cost reports and billing summaries.

• Coordination:
• Liaise with site engineers, project managers, accounts, and procurement for billing data.
• Communicate with clients and consultants regarding clarifications and approvals.

• Qualifications:Bachelor's degree in Civil Engineering or related field.
• 5+7 years of experience in billing/quantity surveying in construction.
• Bachelor’s or Diploma in Civil Engineering.

• Skills Required:Strong knowledge of civil construction practices and contract management.
• Proficiency in MS Excel, AutoCAD.
• Ability to read technical drawings and calculate quantities.
• Good understanding of BOQ, rate analysis, and work order processes.
• Attention to detail and accuracy in documentation.