12+ PCB Jobs in India
Apply to 12+ PCB Jobs on CutShort.io. Find your next job, effortlessly. Browse PCB Jobs and apply today!
PythonRoles and Responsibilities:
- Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
- Experience with Embedded C/C++.
- Experience with Raspberry Pi, Python, and OpenCV.
- Experience with Low power Devices would be preferred
- Knowledge about communication protocols (UART, I2C, etc.)
- Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
- Experience with 3d modeling (preferred).
- Experience with 3d printers (preferred).
- Experience with Hardware design and knowledge of basic electronics.
- Experience with Software will be preferred.ss
Detailed Job role (daily basis) done by the IOT developer.
· Design hardware that meets the needs of the application.
· Support for current hardware, testing, and bug-fixing.
· Create, maintain, and document microcontroller code.
· prototyping, testing, and soldering
· Making 3D/CAD models for PCBs.
PCB Design Engineer
Roles and Responsibilities:
Job Role:
- Utilize CAD System to prepare printed circuit board (PCB) documentation (e.g., schematic diagrams, layouts, assembly drawings and Bills of Material).
- Create documentation for the manufacture and fabrication of PCBs following PCB Department standards.
- Collaborative work with mechanical, firmware, thermal design, manufacturing test, and DVT engineers.
- Start to finish ownership of controller PCBAs – from specification to design, prototype, and manufacturing.
Required Skills:
- Relevant coursework or work experience.
- High-speed PCB design, board routing from scratch & simulations for EMI/EMC
- PDN analysis
- Experience in the selection and use of DSPs, microcontrollers, and programmable logic devices and their peripheral circuitry (signal conditioning, board-level power supplies.)
- Medium to high volume DFT and DFM.
- Experience in supervision of PCB layout, plane definition, and EMC optimization.
- Proficiency with basic EE tools (scopes, network analyzers, etc.)
- Embedded programming of DSPs and FPGAs in real-time control applications.
Preferred Skills:
- Knowledge of basic control theory, including the importance of sensor bandwidths, and design of compensation networks.
- Knowledge of automotive environmental, reliability, and safety requirements.
- Knowledge of automotive networking (e.g. CAN, LIN) standards.
- Knowledge in power semiconductors and switched-mode power conversion
Education:
- Bachelor or higher degree in Electrical Engineering or equivalent experience.
C++WheelsEye is India's leading SAAS-based platform in formulating the next tech-enabled logistics revolution. We offer technology that connects truck fleet owners & SMEs and helps them to automate operations, secure fleets, save costs, improve on-time performance, and streamline their business.
We have a young and energetic team of IITs, NITs, IIMs & top B-Schools employees serving PAN India. We go to great lengths to hire the best talent who are deeply aligned with our values.
We at WheelsEye, believe in fostering a sense of intrapreneurship, promoting team bonding, and creating a positive and friendly work culture where you will feel valued and motivated to do the best work.
Role:- Senior Firmware Developer
Requirements
Core skills:
- Proficiency in programming, specifically Embedded C and C++
- Understanding of Hardware components (Sensors, MCUs, Actuators, Antenna)
Core Experience
- Over 4 years of hands-on experience in Embedded Systems
- Prior experience in building IOT Gateway
- Previous experience in designing FOTA
- Previous experience in the telematics/DMS would be advantageous
- Teamwork
ABOUT US:
GUVI (Grab Your Vernacular Imprint), IIT Madras incubated company is an online Skill Acceleration platform catering to various courses in Vernacular languages. We offer pre-recorded courses on our platform taken by subject matter experts in National and International languages. With more than 200 courses on our platform, we ensure high-quality content and perfection with the value we cater to our learners.
Our products consisting Zen - LIVE classes are mentored by IIT Professors having Industrial expertise in various high-end courses with 100% placement support, HackerKID is India’s first self-paced Gamified Coding and Learning platform which encourages kids to master cutting-edge technologies in-depth in a fun and challenging way, GUVI for corporates is a talent transformation suite that offers an efficient mode of training for employees with our excellent mentors.
JOB DESCRIPTION:
Role: Author
Nature of Job: Freelancer
Location: Remote
Course name: PCB Design
Specialization: Subject Matter Expert
Skills
● Course expertise
● Hands-on experience
● Teaching skills
● Presentation skills
● Communication skills
● Time management
Responsibilities
● Providing sample videos and content plan/syllabus
● Providing pre-recorded, ready-to-launch videos according to the course guidelines framed by the company, post-approval, within the accepted timeline
● Ensuring High - quality Video and Audio
● Ensuring excellent delivery, clarity and tech stack of the course
Process of Onboarding:
● In order to form a smooth onboarding process, we have a set of requirements to be fulfilled. They are as follows:
○ A couple of sample videos of 7 to 10 minutes for evaluation
○ A complete course outline with all the respective activities for the course module
● Once we pass this stage, we can sign an MoU to start working
● As GUVI don’t pay by advance or by milestones, we have an MoU in place for this case.
Payments, deadlines and deliverables:
● Will be discussed in detail while signing the MoU
Job Brief
We are looking for an analytical, results-driven Senior Hardware and Firmware Engineer who can create complex PCB layout while using the least space possible. The designs should allow for easy development and debugging for the firmware engineers while keeping customer requirements, cost constraints and space constraints in mind. Hardware debugging knowledge and soldering skills are essential for this role.
You would also be required to have a keen eye for developing firmware with a low memory footprint and low power consumption while being robust and resistant to errors. You are expected to achieve these goals using your in-depth understanding of the programming language, compilers, microcontroller architectures and debugging tools. You are expected to keep a look out for upcoming advancements in the industry which will help optimize the product.
Main Responsibilities
Your responsibilities will include:
- Would be asked to write efficient, modular and robust firmware which will interface with multiple components like MEMS sensors, battery chargers, secondary microcontrollers etc.
- Writing clean, readable, and modular code
- Would be deeply involved in the schematic design for a product which includes cost-benefit
- analysis of components, component evaluation by designing a proof of concept, suggestions
- in how the components should be connected etc.
- Collaborate with software engineers who would develop companion applications to the
- product
- Creating cost and space optimized layouts for 2/4-layer PCBs
- Collaborating with firmware engineers and supply chain personnel on deciding the
- components to be used on a PCB.
- Collaborate with firmware engineers in designing PCB schematics
- Debugging faulty PCBs using on a hardware level and collaborate with firmware engineers to debug on a firmware level.
- Understanding the manufacturing rules of PCB manufacturers and PCB assembly houses.
Key Requirements
- MSc or PhD in ECE, EEE, EIE or in related fields preferred with a strong technical knowledge and 3-4+ years of experience in designing PCB layouts and developing firmware.
- Ability to transform research articles into the working solutions to solve real-world problems.
- Should have a strong foundation in analog and digital electronics
- Should have designed 4-layer PCBs which has been manufactured
- Familiar with using KiCAD or Altium Designer
- Familiar with using components like MOSFETs, diodes, voltage regulators etc.
- Experience in designing PCBs involving BGA fanouts
- Proficient in using soldering equipment like soldering irons and hot air gun.
- Should have worked with an ARM Cortex M series device like STM32, nRF52 etc
- Familiar with basic data structures like linked lists, queues, trees etc.
- Should be able to compile and link source code with static libraries without using an IDE
- Basic knowledge of microcontrollers peripherals like UART, I2C, SPI, ADC etc.
- Excellent written and verbal communication skills for effectively communicating with the
- team and ability to presenting information to varied technical and non-technical audience.
Must be able to produce solutions independently in an organized manner and be able to - work in a team when required.
Preferred Skills (Not Mandatory)
-
Experience in antenna design
-
Worked with communications protocols like BLE/WiFi
-
Worked with equipment like logic analyzers, oscilloscopes etc
-
Experience in handling 3D printers
-
Familiar with Python
-
Worked with equipment like logic analyzers, oscilloscopes etc.
-
Worked on microcontrollers from Dialog Semiconductors, Nordic Semiconductors,
-
STMicroelectronics, Espressif etc.
-
Worked on projects involving DSP, AI/ML
Responsible for end to end mapping and quality control of the projects
Responsible for Design evaluation of mobile phones from standpoint of hardware, schematic and PCB
layout.
Responsible for database management program for design evaluation from standpoint of HW and MD
design review
Ensure device quality and manufacturability are built into the development process to ensure good
process robustness from launch by incorporating DFMEA & DFM.
Conduct internal & external benchmarking of products and implementing QCD ideas.
Analysis of warranty failures on both process & design level by using SPC & Design guidelines (DFMEA
& DFM) and categorized into SMT process & design failures.
Project execution from KICK OFF phase to Mass Production by evaluating DFMEA, parts quality &
process validation.
Develop & execute test plans that address voice of customer (VOC) such as Reliability, Regression &
Functional testing for HW(PCB validation) & Mechanical at both part & product level.
Estimation of project pricing by bifurcation of key parts PCBA, HW components and mechanical
structure
Draft documents for process flow, design evaluation - DFMEA, TTM
Performance evaluation of DUT by Life cycle test, Temperature & humidity mapping, , short circuit
test, breakdown test, cell balancing, BMS parameter verification, self-discharge test, data sheet
verification.
Validation of HW key parts as Chipset (SoC), DRAM, LCD, TP and Speaker.
Responsible for planning of complete hardware and reliability testing of handset i.e. current
consumption, basic functioning and battery charging.
Responsible for benchmark hardware testing and comparison with DUT.
Responsible for debugging, simulation, and analyzing hardware quality issues.
Understanding of HW architecture, PCB schematic and layout.
Review hardware stack for process feasibility and market failure.
Performing risk assessment to cover all lesson learnt of market issues.
Understanding of RF instrument functioning & testing of hardware for calls functioning.
Create detailed, comprehensive and well-structured test plans and test cases.
Estimate, prioritized, plan and coordinate testing activities.
CEmbedded System Engineer
Working on Embedded programming on the microcontroller, Linux/Android OS development
Working on component sourcing, PCB Design and fabrication
Working on assembly and testing
Working on field deployment and Testing
Skills:
Embedded Systems
C Programming
Must be exceptionally good in Embedded Systems C programming, testing/ debugging and in advanced C concepts
Capable of working in Embedded Systems based projects based on 8 and 32 bit microcontrollers (STM32)
Experience with communication protocols and peripherals like UART, SPI, RTC, Ethernet
Hands on experience in IDE like Keil, AVR Studio, MPLAB
Strong documentation and writing skills
Work Experience
1-3 years preferable, fresher with good embedded system knowledge can also apply
• Support in Upfront Technical Architecture and high level design to ensure
that the product meets manufacturability, Serviceability, performance,
reliability, cost, feature set ETC.
• Work with the team of design engineers for designing of analog and digital
circuits which meets functional, reliability, manufacturability, testing and
ergonomic requirements.
• Expected to maintain and improve systems and development processes.
• Manage the projects and ensure timely delivery
• Testing and Quality Control of Transformer.
• Servicing of all our products.
• Inward Material Inspection.
• PCB Testing.
• Independent Inspection Handing.
• Modification / New Development of procedures – Products.
•Knowledge in the products Electrical /Electronic field.
•Self Correspondence - email drafting, co-ordination
C++CSummary:
Hyperspec is building a real time local map for self-driving cars and using cross view localization to enable ubiquitous autonomy. Hyperspec is a VC funded startup.
The principal embedded systems engineer will have deep expertise in embedded systems design, development and worked for years on embedded systems teams. This person is a leader and mentor to junior engineers and shares knowledge about the design and development of embedded systems.
Responsibilities:
- Serves as an expert in all aspects of embedded projects and embedded systems—including designing, developing, testing, and perfecting designs
- Responsible for updating and working with executive leadership on the development of embedded systems and status of projects
- Provides guidance and mentoring to other members of the team
Requirements:
- Minimum of bachelors' degree in computer science or engineering
- At least ten years of engineering experience with expertise in software engineering, data structures, and programming techniques
- Deep expertise in C/C++ programming
- Experience with FPGAs, PCB, Xilinx, Altera, or similar SoCs.
- Experience with ISPs, Cameras, Switches a plus.
- Experience in working with real-time operating systems, communications protocols and firmware design.
- Experience in interfaces, IP protocols, and hardware subsystems.
- Experience in working as part of a team and leading teams.
- Min. 3-4 years HANDS-ON EXPERIENCE below is mandatory. Altium Designer/Allegro (Preferred tools) Design of multilayer impedance-controlled PCBs
- Schematic symbol and Footprint Library Creation as per IPC standard.
- Hands-on experience with high speed and mixed-signal multilayer layout design.
- Component Placement and Routing plan preparation for design effectiveness
- Complex layout design with DFM and DFT Considerations.
- Gerber Generation and CAM Validation
Required Skill Sets:
- Knowledge of DFM & DFT
- Knowledge of layer stack-up build.
- Knowledge of EMI/EMC considerations for the successful layout design.
- Knowledge of IPC standards.
- In-depth knowledge of PCB fabrication process and Assembly.
- Knowledge in deciphering 2D/3D CAD DRAWINGS
- Willingness to learn new tools, technologies, and processes.
Qualification:
- Diploma/BE/B. Tech in Electronics or any other discipline.
Started in 2015, this lifestyle and accessories startup has taken over the consumer electronics sector in India. Our client has a product range that includes an extensive catalog of headphones, speakers, travel accessories, and modern earphones. It believes in providing cutting edge electronic products stamped with durability and affordability.
The brand is associated with some of the major icons across categories and tie-ups with industries covering fashion, sports, and music, of course. The founders are Marketing grads, with vast experience in the consumer lifestyle products and other major brands. With their vigorous efforts toward quality and marketing, they have been able to strike a chord with major E-commerce brands and even consumers.
- Coordinating with Supplier Selection Process to develop a supply base that provides competitive advantage in quality, value/cost, delivery and technology.
- Undertaking business needs assessment, supply market analysis and commercial risk assessment to inform procurement planning and sourcing decisions
- Developing and administering contract management plans, negotiating changes and modifications, supplier performance management and compliance requirements through effective supplier relationships to enhance business outcomes
- Supporting to Identify, manage and mitigate procurement risks to enable the organisation to meet its obligations and maximize business opportunity
- Analysing all internal and external procurement information to effectively develop supply base strategies for major procurement projects.
- Identifying all suitable suppliers per commodity and region per sample RFQ and developing comprehensive supplier knowledge & database.
- Analysing and awarding best bid based on Total Cost of Ownership (TCO) approach.
What you need to have:
- Preferred Work experience in Wearables, Voice Tech Products, IoT
- Tier 1 Background preferred.
- Having experience in Sourcing, Vendor Development, Purchase
- Handled Electronic components, PCB, Mechanical Parts
- Experience with BOM, Costed BOM, Chinese Collaboration
- Should have strong knowledge in Selecting Alternate Components
- Should able to get or suggest best low-cost components
- Should have worked on Value engineering
- Knowledge about Import, Export, Costing, Projects
Follow Cutshort