Embedded System Engineer

We are looking for Embedded Developer with Leading Global MNC - Faridabad

Description:

• Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
• Excellent knowledge of C/C++ programming and exposure to Assembly.
• Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
• Hands-on experience in developing HAL, BSP and low-level device drivers.
• Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
• Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
• Knowledge of AUTOSAR concepts and architecture is an advantage.
• Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
• Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
• Experience in board bring-up, hardware-software integration and debugging of embedded boards.
• Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
• Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
• Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
• Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
• Experience in reverse engineering and debugging of embedded systems.
• Strong understanding of embedded system architecture and system-level design.
• Experience with Embedded Linux and/or RTOS-based systems is an advantage.
• Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
• Knowledge of NMEA/NMEA 2000 standards is a plus.
• Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
• Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

Roles & Responsibilities:

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

We are hiring an Embedded Software Engineer to develop firmware and low-level software for embedded devices and connected products.

Responsibilities

• Develop firmware in Embedded C and C++ for microcontroller-based systems
• Build real-time applications on RTOS platforms such as FreeRTOS
• Write and maintain device drivers for peripherals (UART, SPI, I2C, CAN)
• Develop and customise Embedded Linux components
• Debug hardware and software issues using oscilloscopes, JTAG and debuggers
• Work with hardware teams on board bring-up and testing

Requirements

• 1+ years of experience in embedded software development
• Strong Embedded C and C++ programming skills
• Hands-on experience with microcontrollers (ARM Cortex, STM32, ESP32 or similar)
• Experience with RTOS and device driver development
• Exposure to Embedded Linux is a plus

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

Power Electric Vehicles with embedded software for battery management and autonomous driving.

What you'll do:

• Develop BMS algorithms (SOC/SOH estimation)
• Implement CAN bus communication protocols
• Code motor control algorithms (FOC, sensorless)
• Build ADAS features (ultrasonic parking, vision)
• HIL testing with Vector tools
• Optimize for automotive-grade reliability (AUTOSAR)

What we need:

• C/C++, Embedded Linux/RTOS
• Microcontroller experience (STM32, NXP)
• Control systems or automotive interest
• Debugging skills (oscilloscopes, logic analyzers)

Future-proof skills:

• Work on actual EV prototypes
• Portfolio for Tata, Mahindra EV teams
• Automotive cybersecurity exposure

Location : Mumbai

Big Picture (The Opportunity) :

Are you looking for an opportunity to advance your Career? & If you are able to maintain a positive attitude even when everything goes wrong, if you are detail oriented and self motivated with a passion to learn and improve your skills and knowledge, we have a perfect job for you !

What do we want from you ? (Our Expectations) :

• Zero to 2 years experience in Linux Operating System.
• Flexible working hours - able to support occasional nights, weekends, and call-ins, able to quickly adapt to a constantly changing faced paced environment. Open to travel to sites.
• An ideal person who is excited and motivated about running and supporting a production - grade critical infrastructure and looks for opportunities to improve processes with automation.

What are you required to do ? (Your Responsibilities) :

• Proactively maintain and develop all linux infrastructure technology to maintain a 24*7*365 uptime service.
• Engineering of systems administration-related various solutions for our various SAAS products and projects as well as operational needs.
• Proactively monitoring system performance and capacity planning.
• Providing technical support to customers for Applications, Operating systems, and networking.
• Will also be the first point of contact for our clients, where installations are placed on a permanent basis, for basic troubleshooting and problem solving.
• Fault finding, analysis and logging information for reporting of performance exceptions.
• Maintain best practices on managing systems and services across all environments.

Skills & Qualification Required (Add Value) :

• Graduate - Preferred to have Bachelor‘s Degree in Engineering, Computer Science or related field.
• He / She should be familiar with the installation and configuration of Linux operating systems and setup and operation of TCP/IP networking on Linux systems also familiar with Internet concepts including SMTP, IMAP, POP, HTTP, DNS, LDAP and related protocols.
• You should possess excellent communication skills .
• Knowledge of Email concepts, Helpdesk Concept , VoIP Concept , Cloud computing will be an added advantage.

Job Summary:

We are seeking a skilled Firmware Developer with 3 years of experience to join our team. The successful candidate will be responsible for developing and maintaining embedded software for our products. The candidate should have a strong understanding of the software development life cycle, embedded systems, and the C programming language.

Key Responsibilities:

• Develop and maintain embedded software for our products

• Design and implement software modules and drivers for embedded systems

• Collaborate with hardware engineers to integrate software and hardware components

• Test and debug embedded software

• Create and maintain technical documentation

• Participate in code reviews and contribute to software architecture and design discussions

• Stay up-to-date with the latest trends and technologies in embedded systems and software development

Requirements:

• Bachelor’s degree in Computer Science, Electrical Engineering, or a related field

• 3 years of experience in embedded software development

• Strong understanding of software development life cycle

• Proficiency in C programming language

• Experience with embedded systems and microcontrollers

• Experience with communication protocols such as SPI, I2C, UART, and CAN

• Familiarity with software development tools such as Git, Jira, and Jenkins

• Strong analytical and problem-solving skills

• Ability to work independently and in a team environment

• Excellent communication and interpersonal skills

Preferred qualifications:

• Degree in Electrical Engineering, or a related field

• Experience with wireless communication protocols such as Bluetooth, LoRa & Wi-Fi

• Knowledge of real-time operating systems such as FreeRTOS, uC/OS-II, or VxWorks

• Experience with Agile software development methodologies

Benefits:

• Health insurance
• Leave encashment
• Paid sick time
• Provident Fund
• 
  

Job Type: Full Time

Job Location: Perundurai

State Wise: Tamil Nadu

Divison Wise: R & D Division

Job Description – Mechatronics Engineer

Position

Mechatronics Engineer

Experience

2 years

Location

Bengaluru, India

About the Role

We are looking for a hands-on Mechatronics Engineer with approximately 2 years of experience to work on the development and integration of intelligent electro-mechanical systems.

The role involves a combination of electronics system assembly and testing, sensors and actuators, control algorithms, estimation algorithms, embedded implementation, system configuration, and hardware-software integration. The ideal candidate should be comfortable working across the boundary between mechanical, electrical, embedded software, and algorithms.

Key Responsibilities

1. System Assembly & Integration

• Assemble and integrate electro-mechanical systems, sensors, actuators, embedded computers, controllers, and associated electronics.
• Perform wiring, connection, sensor installation, and basic electrical integration.
• Support integration of cameras, IMUs, GNSS, encoders, motors, servos, and other sensors/actuators.
• Configure systems for laboratory, ground, and flight testing.
• Troubleshoot hardware, electrical, communication, and integration issues.

2. Electronics Testing & Validation

• Develop and execute test procedures for electronic and mechatronic subsystems.
• Perform functional testing, sensor validation, actuator testing, and system-level testing.
• Use laboratory equipment such as oscilloscopes, multimeters, power supplies, electronic loads, and logic analysers.
• Analyse test data and identify hardware, firmware, sensor, or integration issues.
• Maintain test records, test reports, and issue/defect logs.

3. Control & Estimation Algorithms

• Implement and integrate control algorithms for electro-mechanical systems.
• Work with PID, state-space, feedback control, actuator control, and related control techniques.
• Implement estimation algorithms such as complementary filters, Kalman filters, EKF/UKF, or sensor fusion algorithms.
• Perform sensor calibration, parameter estimation, filtering, and system identification.
• Tune control and estimation parameters based on laboratory and flight-test data.

4. Embedded Implementation

• Implement algorithms on embedded processors and real-time computing platforms.
• Interface sensors and actuators using protocols such as UART, SPI, I²C, CAN, RS-232/485, Ethernet, etc.
• Develop or modify embedded C/C++ code for system integration.
• Debug hardware-software interaction and real-time issues.
• Support optimisation and deployment of algorithms on resource-constrained embedded systems.

5. Configuration & Version Management

• Maintain configuration of hardware, firmware, software, sensors, and system parameters.
• Maintain configuration-controlled parameter files, calibration data, firmware versions, and test configurations.
• Use Git or equivalent version-control systems for software and configuration management.
• Maintain proper traceability between hardware configuration, software version, test results, and system performance.
• Support controlled release of system configurations for testing and demonstrations.

6. System Testing & Field Trials

• Participate in system-level integration, laboratory testing, HIL/SIL testing, and field/flight trials.
• Prepare test setups and test cases based on system requirements.
• Collect and analyse telemetry, sensor, actuator, and performance data.
• Diagnose failures during integration and testing and work with the engineering team to resolve them.
• Support verification and validation activities for production-grade systems.

Required Skills

• B.E./B.Tech/M.Tech in Mechatronics, Electronics, Electrical, Instrumentation, Mechanical Engineering, or a related discipline.
• Approximately 2 years of relevant industry/project experience.
• Strong hands-on experience with electronics system assembly, integration, and testing.
• Understanding of sensors, actuators, motors, servos, and embedded systems.
• Good understanding of control systems and estimation/filtering techniques.
• Experience implementing algorithms in C/C++ and/or Python.
• Familiarity with microcontrollers, embedded processors, and real-time systems.
• Working knowledge of communication protocols such as CAN, UART, SPI, I²C and Ethernet.
• Experience using laboratory test equipment such as oscilloscopes and multimeters.
• Familiarity with Git and configuration/version management.
• Ability to read schematics, datasheets, interface specifications, and technical documentation.
• Strong debugging and problem-solving skills.
• Willingness to work hands-on with hardware and participate in field/flight testing.

Good to Have

• Experience with UAVs, robotics, autonomous systems, gimbals, or avionics.
• Experience with IMU, GNSS, magnetometer, barometer, encoder, camera, or other navigation sensors.
• Experience with EKF/UKF, sensor fusion, visual-inertial estimation, or inertial navigation.
• Familiarity with MATLAB/Simulink.
• Experience with PX4, ArduPilot, ROS/ROS2, or similar platforms.
• Experience with HIL/SIL testing.
• Basic understanding of real-time operating systems.
• Experience with hardware bring-up and PCB-level debugging.
• Familiarity with engineering standards, configuration management, and structured V&V processes.

Desired Attributes

• Hands-on engineer who enjoys working with both hardware and software.
• Comfortable moving between mechanical assembly, electronics, algorithms, and embedded implementation.
• Strong debugging mindset with an ability to systematically isolate problems.
• Good understanding of engineering fundamentals rather than dependence on pre-built libraries or tools.
• Able to work independently on assigned modules while collaborating closely with multidisciplinary teams.
• Comfortable working in a fast-paced R&D environment involving prototyping, testing, iteration, and field trials.
• Strong documentation and communication skills.

Typical Technology Environment

Sensors & Actuators: IMU, GNSS, magnetometer, encoders, cameras, motors, servos

Embedded: Microcontrollers, ARM processors, embedded Linux/RTOS

Algorithms: PID, state estimation, Kalman filtering, sensor fusion, system identification

Programming: C/C++, Python, MATLAB/Simulink

Testing: Oscilloscope, logic analyser, multimeter, power supply, HIL/SIL

This is a hands-on R&D engineering role suited for an engineer who wants to work on complete intelligent systems rather than a narrowly defined mechanical or electronics function. The engineer will contribute across assembly → integration → algorithm implementation → configuration → testing → debugging → field validation, with particular emphasis on UAV and autonomous-system applications.

Technical Lead – Embedded Software Application Projects

link: https://www.ziliconcloud.com/careers

ZILICONCLOUD PRIVATE LIMITED is looking for an experienced Technical Lead with 5–8 years of industry experience in Embedded Systems, IoT, AI, Cloud, and Software Engineering.

The candidate will lead Embedded, IoT, Edge AI, and Cloud projects, define system architecture, convert requirements into technical tasks, and ensure successful project execution and delivery.

Key Responsibilities

• Design modular system architectures for Embedded, IoT, Edge AI, Cloud, REST APIs, and dashboards.
• Convert requirements into clear tasks, milestones, and deliverables.
• Track project progress, manage technical risks, and ensure on-time delivery.
• Guide engineers on coding standards, Git, testing, debugging, and documentation.
• Troubleshoot issues across hardware, firmware, IoT, cloud, backend, and UI.
• Support system integration, testing, debugging, and performance improvement.
• Review technical designs, code, and test results.
• Lead prototype development, integration, technical reviews, and demonstrations.
• Mentor young engineers and explain complex technical concepts in a simple and practical way.
• 
  

Required Skills

C/C++, Python, JavaScript/TypeScript, Linux, FreeRTOS, Microcontrollers, REST APIs, MQTT, Git, Embedded Software, IoT, and system debugging.

Preferred: AWS IoT, Microsoft Azure, ThingsBoard, OpenCV, TensorFlow Lite (TFLite), React, Flutter, or FastAPI.

Education

B.E./B.Tech/M.E./M.Tech in ECE, CSE, Embedded Systems, Mechatronics, or a related field.

📍 Location: East Tambaram, Chennai, Tamil Nadu

💼 Experience: 5–8 Years

🕒 Employment Type: Full-Time

About Nexora Group

Nexora Group is a technology-driven organization focused on innovation in Artificial Intelligence, IoT, Embedded Systems, Robotics, and next-generation digital solutions. We provide aspiring engineers with opportunities to gain practical experience, work on industry-relevant projects, and develop skills that bridge hardware and intelligent software systems.

Internship Overview

Nexora Group is seeking passionate and innovative Embedded Systems with AI Interns to join our technology team. This internship is designed for students and recent graduates interested in embedded programming, IoT development, edge AI, robotics, and intelligent hardware systems. Interns will work on real-world projects involving microcontrollers, sensors, AI-powered devices, and automation solutions.

Key Responsibilities

• Design, develop, and test embedded applications for intelligent systems.
• Work with microcontrollers and development boards such as Arduino, ESP32, STM32, and Raspberry Pi.
• Integrate sensors, actuators, and communication modules into embedded solutions.
• Develop and deploy AI/ML models for edge devices and IoT applications.
• Assist in building smart automation, robotics, and intelligent monitoring systems.
• Debug, optimize, and troubleshoot hardware and firmware issues.
• Collaborate with software and AI teams to integrate machine learning into embedded platforms.
• Document project architecture, testing results, and technical specifications.
• Research emerging technologies in Edge AI, TinyML, IoT, and Embedded Computing.

Required Skills

• Basic understanding of Embedded Systems and Microcontrollers.
• Knowledge of C, C++, or Python programming.
• Familiarity with Arduino IDE, PlatformIO, Raspberry Pi, or similar development environments.
• Understanding of electronics, sensors, and communication protocols (UART, I2C, SPI, MQTT).
• Basic knowledge of Artificial Intelligence and Machine Learning concepts.
• Strong analytical and problem-solving abilities.
• Good communication and teamwork skills.
• Passion for innovation and hardware-software integration.

Preferred Qualifications

• Experience with IoT, Robotics, Automation, or Embedded Projects.
• Familiarity with TensorFlow Lite, TinyML, Edge AI, or Computer Vision applications.
• Knowledge of PCB design, circuit simulation, or hardware prototyping.
• Participation in technical competitions, hackathons, or research projects.
• GitHub portfolio or project demonstrations showcasing embedded or AI work.

Eligibility

• Undergraduate or postgraduate students pursuing Electronics & Communication Engineering (ECE), Electrical Engineering (EE), Computer Science, Embedded Systems, Mechatronics, Robotics, IoT, AI, or related disciplines.
• Recent graduates seeking practical industry exposure.
• Candidates passionate about intelligent hardware systems and emerging technologies.

What You'll Gain

• Hands-on experience with real-world Embedded Systems and AI projects.
• Exposure to IoT, Edge AI, Robotics, and Smart Device development.
• Mentorship from experienced engineers and technology professionals.
• Internship Completion Certificate.
• Letter of Recommendation based on performance.
• Opportunity for a Pre-Placement Offer (PPO) for outstanding performers.
• Professional networking and career growth opportunities.