5+ PCB Jobs in Bangalore (Bengaluru) | PCB Job openings in Bangalore (Bengaluru)
Apply to 5+ PCB Jobs in Bangalore (Bengaluru) on CutShort.io. Explore the latest PCB Job opportunities across top companies like Google, Amazon & Adobe.
PCB Design Engineer
Roles and Responsibilities:
Job Role:
- Utilize CAD System to prepare printed circuit board (PCB) documentation (e.g., schematic diagrams, layouts, assembly drawings and Bills of Material).
- Create documentation for the manufacture and fabrication of PCBs following PCB Department standards.
- Collaborative work with mechanical, firmware, thermal design, manufacturing test, and DVT engineers.
- Start to finish ownership of controller PCBAs – from specification to design, prototype, and manufacturing.
Required Skills:
- Relevant coursework or work experience.
- High-speed PCB design, board routing from scratch & simulations for EMI/EMC
- PDN analysis
- Experience in the selection and use of DSPs, microcontrollers, and programmable logic devices and their peripheral circuitry (signal conditioning, board-level power supplies.)
- Medium to high volume DFT and DFM.
- Experience in supervision of PCB layout, plane definition, and EMC optimization.
- Proficiency with basic EE tools (scopes, network analyzers, etc.)
- Embedded programming of DSPs and FPGAs in real-time control applications.
Preferred Skills:
- Knowledge of basic control theory, including the importance of sensor bandwidths, and design of compensation networks.
- Knowledge of automotive environmental, reliability, and safety requirements.
- Knowledge of automotive networking (e.g. CAN, LIN) standards.
- Knowledge in power semiconductors and switched-mode power conversion
Education:
- Bachelor or higher degree in Electrical Engineering or equivalent experience.
Pace Robotics is a construction robotics startup incubated by SINE IIT-Bombay and backed by Pidilite Ventures, MARL 5G Accelerator and Kochi Holdings. We are making the construction process faster, smarter and efficient through robots that can do advanced construction tasks and digitize execution data in real time. We are currently piloting our first product, a modular robot for plastering, painting and putty of building interiors, at construction sites.
To support our next stage of growth and to take the product from prototype to manufacturing ready design, we are looking for an embedded software engineer who will support the design and implementation of the software for embedded devices and systems end to end from requirements gathering to commercial deployment.
What will you do
- Develop embedded code which enables simultaneous exchange of data between various modules and sensors to facilitate fast/robust decision making for the robot.
- Selection of Communication Protocols, actuation sequencing and deep involvement with embedded software and control strategy.
- Develop and maintain various engineering tools used to debug, analyze, and test embedded products.
- Support the Embedded Systems Lead in working as the common link between the hardware, robot autonomy, and software teams, converting inputs from each team along with overall product/customer needs into electronic circuits, software and hardware.
- Assist in conceptualizing, designing, fabricating, integrating and testing overall embedded architecture, embedded boards, software and circuitry for Pace Robotics’ fleet of AGV based robots.
- Assist in selection and integration of all active, passive components, micro-controller, processor w/peripherals and power components.
- Work on improving the efficiency of the power distribution and consumption.
- Work on designing the wiring scheme of the whole autonomous system.
Qualifications
- Masters or Bachelors (with 2-5 yrs exp) in Electronics & Communication / Electronics & Instrumentation/Electrical & Electronics/Embedded Systems with relevant experience in industrial R&D Projects.
You have the following technical skill sets:
- Expertise with microcontroller/microprocessors (non - Arduino), C programming, digital electronics, different communication protocols such as SPI, I2C, rs232, ethernet, rs485, CAN etc
- Good Understanding of Electronics Circuits and Schematics.
- Deep expertise of RTOS / LINUX programming concepts.
- Excellent understanding of Signal Processing methods, (Good To have)
- Experienced in PCB and wiring harness Design, (Good to Have)
- Proficient with Matlab, Simulink, DAQ software. (Good To have)
You have the following personal attributes:
- You are highly organized and methodical in everything you do
- You love solving problems and look at them as an opportunity to grow
- You get excited about thinking, talking and building technology and exploring its endless possibilities
What's in it for you:
Globally, Construction provides a 1.6 Trillion Dollar opportunity, just by making the work more efficient. This is the market we are after. You will be an integral part of the core team of an early stage startup on a mission change the way we build our world and disrupt one of the oldest and the largest industries. You will be designing products that can change the landscape of construction, become ubiquitous in project sites and be synonymous with construction of the future (Think of JCB and Tower Cranes of today)
We promise you an environment that promotes unhindered innovation and one that can provide exciting opportunities for accelerated growth. You will be working with a stellar engineering team having diverse experience in developing robots for automotive, agriculture and construction industries. You will have immense learning opportunity as you will be working on ‘never-seen-before’ products for an industry that’s ripe for technological disruptions.
The compensation includes company stocks through ESOP’s and Other Perks like Health insurance and Personal Accident Insurance for Self.
Please note that we don’t necessarily expect to find a candidate that has done everything listed or possesses all the required skill sets but you should be able to make a credible case that you have done most of it and are keen on learning new things on the job.
Job Brief
We are looking for an analytical, results-driven Senior Hardware and Firmware Engineer who can create complex PCB layout while using the least space possible. The designs should allow for easy development and debugging for the firmware engineers while keeping customer requirements, cost constraints and space constraints in mind. Hardware debugging knowledge and soldering skills are essential for this role.
You would also be required to have a keen eye for developing firmware with a low memory footprint and low power consumption while being robust and resistant to errors. You are expected to achieve these goals using your in-depth understanding of the programming language, compilers, microcontroller architectures and debugging tools. You are expected to keep a look out for upcoming advancements in the industry which will help optimize the product.
Main Responsibilities
Your responsibilities will include:
- Would be asked to write efficient, modular and robust firmware which will interface with multiple components like MEMS sensors, battery chargers, secondary microcontrollers etc.
- Writing clean, readable, and modular code
- Would be deeply involved in the schematic design for a product which includes cost-benefit
- analysis of components, component evaluation by designing a proof of concept, suggestions
- in how the components should be connected etc.
- Collaborate with software engineers who would develop companion applications to the
- product
- Creating cost and space optimized layouts for 2/4-layer PCBs
- Collaborating with firmware engineers and supply chain personnel on deciding the
- components to be used on a PCB.
- Collaborate with firmware engineers in designing PCB schematics
- Debugging faulty PCBs using on a hardware level and collaborate with firmware engineers to debug on a firmware level.
- Understanding the manufacturing rules of PCB manufacturers and PCB assembly houses.
Key Requirements
- MSc or PhD in ECE, EEE, EIE or in related fields preferred with a strong technical knowledge and 3-4+ years of experience in designing PCB layouts and developing firmware.
- Ability to transform research articles into the working solutions to solve real-world problems.
- Should have a strong foundation in analog and digital electronics
- Should have designed 4-layer PCBs which has been manufactured
- Familiar with using KiCAD or Altium Designer
- Familiar with using components like MOSFETs, diodes, voltage regulators etc.
- Experience in designing PCBs involving BGA fanouts
- Proficient in using soldering equipment like soldering irons and hot air gun.
- Should have worked with an ARM Cortex M series device like STM32, nRF52 etc
- Familiar with basic data structures like linked lists, queues, trees etc.
- Should be able to compile and link source code with static libraries without using an IDE
- Basic knowledge of microcontrollers peripherals like UART, I2C, SPI, ADC etc.
- Excellent written and verbal communication skills for effectively communicating with the
- team and ability to presenting information to varied technical and non-technical audience.
Must be able to produce solutions independently in an organized manner and be able to - work in a team when required.
Preferred Skills (Not Mandatory)
-
Experience in antenna design
-
Worked with communications protocols like BLE/WiFi
-
Worked with equipment like logic analyzers, oscilloscopes etc
-
Experience in handling 3D printers
-
Familiar with Python
-
Worked with equipment like logic analyzers, oscilloscopes etc.
-
Worked on microcontrollers from Dialog Semiconductors, Nordic Semiconductors,
-
STMicroelectronics, Espressif etc.
-
Worked on projects involving DSP, AI/ML
- Min. 3-4 years HANDS-ON EXPERIENCE below is mandatory. Altium Designer/Allegro (Preferred tools) Design of multilayer impedance-controlled PCBs
- Schematic symbol and Footprint Library Creation as per IPC standard.
- Hands-on experience with high speed and mixed-signal multilayer layout design.
- Component Placement and Routing plan preparation for design effectiveness
- Complex layout design with DFM and DFT Considerations.
- Gerber Generation and CAM Validation
Required Skill Sets:
- Knowledge of DFM & DFT
- Knowledge of layer stack-up build.
- Knowledge of EMI/EMC considerations for the successful layout design.
- Knowledge of IPC standards.
- In-depth knowledge of PCB fabrication process and Assembly.
- Knowledge in deciphering 2D/3D CAD DRAWINGS
- Willingness to learn new tools, technologies, and processes.
Qualification:
- Diploma/BE/B. Tech in Electronics or any other discipline.
Started in 2015, this lifestyle and accessories startup has taken over the consumer electronics sector in India. Our client has a product range that includes an extensive catalog of headphones, speakers, travel accessories, and modern earphones. It believes in providing cutting edge electronic products stamped with durability and affordability.
The brand is associated with some of the major icons across categories and tie-ups with industries covering fashion, sports, and music, of course. The founders are Marketing grads, with vast experience in the consumer lifestyle products and other major brands. With their vigorous efforts toward quality and marketing, they have been able to strike a chord with major E-commerce brands and even consumers.
- Coordinating with Supplier Selection Process to develop a supply base that provides competitive advantage in quality, value/cost, delivery and technology.
- Undertaking business needs assessment, supply market analysis and commercial risk assessment to inform procurement planning and sourcing decisions
- Developing and administering contract management plans, negotiating changes and modifications, supplier performance management and compliance requirements through effective supplier relationships to enhance business outcomes
- Supporting to Identify, manage and mitigate procurement risks to enable the organisation to meet its obligations and maximize business opportunity
- Analysing all internal and external procurement information to effectively develop supply base strategies for major procurement projects.
- Identifying all suitable suppliers per commodity and region per sample RFQ and developing comprehensive supplier knowledge & database.
- Analysing and awarding best bid based on Total Cost of Ownership (TCO) approach.
What you need to have:
- Preferred Work experience in Wearables, Voice Tech Products, IoT
- Tier 1 Background preferred.
- Having experience in Sourcing, Vendor Development, Purchase
- Handled Electronic components, PCB, Mechanical Parts
- Experience with BOM, Costed BOM, Chinese Collaboration
- Should have strong knowledge in Selecting Alternate Components
- Should able to get or suggest best low-cost components
- Should have worked on Value engineering
- Knowledge about Import, Export, Costing, Projects
Follow Cutshort