9+ Circuit Design Jobs in India
Apply to 9+ Circuit Design Jobs on CutShort.io. Find your next job, effortlessly. Browse Circuit Design Jobs and apply today!
Responsibilities
- Responsible for design and spec development and design of analog blocks for advanced mixed-signal / analog circuits.
- Write detailed design specification and will be in close collaboration with the system architect, circuit designers and design verification engineers.
- Work on behavioral modeling of analog blocks and support design verification to ensure bug free silicon.
- Lead development of analog blocks in collaboration with external vendors and lead integration, test plan and characterization efforts.
Requirements
- Strong track record of architect, develop, verification and validation of complete silicon IPs
- Deep understanding of bandgaps, bias, opamps, switched-cap circuits, LDOs, PLLs, feedback and compensation techniques, DCDC converters
- In-depth knowledge and good understanding of analog design techniques.
- Experience in digital integration of analog IPs with chip level integration team
- Experience in developing behavior modeling a plus
- Experience IP design management or vendor management a plus
- Strong device physics knowledge as it applies to analog IC design
- Hand-on experience with IP lab characterization using spectrum analyzers, oscilloscopes, signal generators, etc.
- Experience in working with production test engineers to produce test plans and design for testability details
- Excellent communication skills
- Team player with an ability to encourage team members
Education & Experience
- MS (preferred in EE) plus 8 years
- PhD (preferred in EE) plus 5 years
Note:
Annual job salary: The annual job salary mentioned in this posting is a default number taken by cutshort and is inaccurate. <Not mentioned/ disclosed by Rivos>
Resumes:
Interested folks with 3+ years to 20 years of experience into AMS Design, Please reach out to the Recruiter Deepa Savant to learn more about the job and discuss details.
Key qualifications•
The ideal candidate will have 4+ years of experience in backend design automation and standard cell characterization
• Prior experience and proven success of successfully designing high performance standard cells is desired
• Solid knowledge of circuit analysis, reliability, extraction, and SPICE simulation to validate design performance
• Knowledge of industry standard hardware design CAD software and required standard cell design view generation and validation.
• Solid foundation of scripting fluency in TCL, Perl/Python
• Basic knowledge of advanced FinFet device and standard cell circuit and layout
• Ability to work well in a team and be productive under aggressive schedules.
• Excellent problem solving, written and verbal communicationResponsibilities• Responsible for timing and power characterization and generation of standard cell EDA views,
• Other job duties include performing QA including EM/IR and design checks
• adding automation to improve design productivity
Note:
Annual job salary: The annual job salary mentioned in this posting is a default number taken by cutshort and is inaccurate. <Not mentioned/ disclosed by Rivos>
Resumes:
Interested folks with 4+ years of experience in Standard cell, Please reach out to the Recruiter Deepa Savant to learn more about the job and discuss details.
Position: CCTV/Networking Engineer
Degree : Diploma, B.C.A, BTech
Experience : 1-4 years
Location: Bangalore
Skills : Networking, CCTV installation, Biometric Solutions, hardware troubleshooting skills.
Good communication skill.
Role:
1. Ability to communicate with field staff and guide them through troubleshooting and fixing the issues in CCTV system, CPU, WiFi and networking
2. Prepare status report onndaily basis and share with the client.
3. Communicate with the client and address the issues in timely manner
4. Promtly able to forsee the issues and take corrective actions.
5. Should be able to work with the installation team, planning team to improve the overall efficiency of the system.
6. Willingness to travel to the sites in field across India and address the issues will be positive
Custom Memory Design
SRAM/custom circuit design and standard cell design
|
Qualifications • Candidates must have 7+ years of experience in transistor level custom circuit design from RTL-GDS for CPU and SoC, circuit simulation, equivalence checking, PPA trade off analysis, low power design techniques, timing, noise and power characterization • Prior experience and proven success of successfully designing high performance SRAM memories, Register file memories, SRAM compilers, data path designs and standard cells • Experience designing transistor-level custom circuits in advanced FinFET technology nodes • Solid understanding of device physics, process technology and circuit design techniques for high performance, low power • Experience with advanced process design rules and supervising mask design • Knowledge developing automation for compilers and standard cells • Post-Silicon test and debug experience • Ability to work well in a team and be productive under aggressive schedules • Excellent problem solving, written and verbal communication • Master's Degree or Bachelor's Degree with 7+ years of experience |
Responsibilities • The role will be at the center of a state-of-the-art circuit design effort, interfacing with all disciplines and have a critical impact on getting products to market quickly • Responsible for designing and delivering custom circuits from scratch • Drive design and development of SRAM, register file, custom cells to enable high performance and low power designs • Work with microarchitecture team to gather specifications • Drive optimal implementation Conduct early sizing estimates and PPA analysis • Perform design entry and simulations for optimal design sizing • Work closely with mask designers on custom design implementation, DFM and yield enhancement features • Collaborate with the CPU and SoC Physical design teams on floorplanning, placement, timing and power closure of the custom design • Interact with technology team • Participate in developing design and test plans Collaborate with the CAD team and drive design flow enhancements |
Job description
Rivos Custom Circuits team is seeking highly motivated candidates to develop state of the art custom SRAM memories, Register file memories, memory compilers and standard cells to improve circuit performance, optimize dynamic and static power and support silicon bring up. The role will be at the center of a state-of-the-art circuit design effort, interfacing with all disciplines and have a critical impact on getting products to market quickly.
Responsibilities
- Responsible for designing and delivering custom circuits from scratch.
- Drive design and development of SRAM, register file, custom cells to enable high performance and low power designsWork with microarchitecture team to gather specifications
- Drive optimal implementation Conduct early sizing estimates and PPA analysis. Perform design entry and simulations for optimal design sizingWork closely with mask designers on custom design implementation, DFM and yield enhancement featuresCollaborate with the CPU and SoC Physical design teams on floorplanning, placement, timing and power closure of the custom designInteract with technology team
- Participate in developing design and test plans Collaborate with the CAD team and drive design flow enhancements
Qualification
- Candidates must have 7+ years of experience in transistor level custom circuit design from RTL-GDS for CPU and SoC, circuit simulation, equivalence checking, PPA trade off analysis, low power design techniques, timing, noise and power characterization.
- Prior experience and proven success of successfully designing high performance SRAM memories, Register file memories, SRAM compilers, data path designs and standard cells
- Experience designing transistor-level custom circuits in advanced FinFET technology nodes
- Solid understanding of device physics, process technology and circuit design techniques for high performance, low power
- Experience with advanced process design rules and supervising mask design
- Knowledge developing automation for compilers and standard cells
- Post-Silicon test and debug experience
- Ability to work well in a team and be productive under aggressive schedules.
- Excellent problem solving, written and verbal communication
Education and Experience
- Master's Degree or Bachelor's Degree with 7+ years of experience
Skill Required
Technical
-
● The suitable candidate shall have most of the following knowledge /skills/experience:
-
● Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware
-
Design Life Cycle.
-
● Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).
-
● Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.
-
● Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.
-
● Circuit building and Circuit Analysis Skills.
-
● Component Data Sheet analysis skills.
-
● Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).
-
● Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).
-
● Knowledge about Board Bring Up process.
-
● Testing (Integration testing, protocol/Driver testing, etc.).
-
● Experience in Embedded C programming and embedded system integration and can develop test cases for the same.
-
● Knowledge of IoT Open Source Programming / Development.
-
● Candidate will be responsible for research & development of M2M/IoT products.
-
● Candidate will be responsible for end-to-end embedded system integration.
-
Others
Abilities on the following shall be of added advantage:
-
● Component Procurement
-
● Vendor Interaction
-
● Tools Management
-
● Costing and resource estimation
-
● Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative
-
-
Decision level
Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending MachinesDemonstrate (Key competencies)
Healthy knowledge of most of the following:
-
● Embedded C
-
● 8/16 bit Microcontrollers
-
● Atmel Studio/ Arduino IDE
-
● Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)
-
● Hands-on experience on Test equipment and solder stations (SMD/DIP)
-
● M2M / IoT based development
RESPONSIBILITIES:
- You will support the product delivery roadmap of our BIM Software with a focus on our installations feature; our highly automated MEP (Mechanical, Electrical & Plumbing) design module, through the analysis and the testing of the new features, by monitoring the regressions, by finding the lack in the requirements (corner cases), by providing usability feedback, and how it deals with the other modules (Structural, Architectural, FEM).
- With the other QA members, you will be the link between the UX/UI Design team, the Product Owner, the Software Development teams in order to ensure the quality to deliver the whole BIM software and all its components.
- Analyze and Understand the Feature Requirements as well as find lacks (corner cases).
- Test features iteratively.
- Provide Usability Feedback as Technical user/ Standard User.
- Assess the Bugs severity.
- Monitor Feature Regressions.
- Helps to define the NFR.
- Works with Agile cross-functional teams with various stakeholders like UX Designers, Product Owners, Developers, and Scrum Master.
BASIC QUALIFICATIONS:
- 2+ years of experience in the design of Civil Electrical Installations (e.g. Wiring Systems and Methods of Electrical Wiring).
- Bachelor’s Degree in Electrical Engineering.
- Practical and demonstrable experience with Electrical Circuit Design Simulator (e.g. Multisim/ SPICE/ ETAP).
- Friendly with Electrical Visual Design Software (e.g. Revit).
- Friendly with different OS Environments (Windows/ MaCOSx/ Linux).
- Relevant IT Certifications.
NICE TO HAVE:
- Experiences with Agile Methodologies (Scrum, Kanban).
- Basic Knowledge of Quality Assurance theory: principles, methodologies, and techniques.
- Knowledge of at least one Collaborative Revision System (e.g. Bitbucket, Gitlab).
Relevant Soft Skills for this role:
- Open learning things he/she has never seen before;
- Passion for technology;
- Proactive, self-starter skills and ability to manage multiple tasks effectively;
- Excellent communication skills with the ability to engage, influence, and inspire partners and stakeholders to drive collaboration and alignment;
- A high degree of organization, individual initiative, and personal accountability
- Outstanding written and verbal communication; must be a clear, concise, persuasive communicator.
alog Circuit Design::
- The candidate should have B.Tech or M.Tech in Electronics/Electrical/VLSI Design Engineering
- The candidate should have relevant work experience of 7-16 years in Analog and SERDES IO IP design e.g. GPIOs, Thermal Sensor, PLL, ADC/DAC/ Voltage regulators/LDOs, AIB, HBMIO, DDR, HDMI/DP IO, MIPI IO etc.
Docker
Jenkins
Profile Description:
The job holder will work with developers and the IT staff to oversee the code releases, combining an understanding of both engineering and coding. From creating and implementing systems software to analyzing data to improve existing ones, a DevOps Engineer increases productivity in the workplace.
Key Responsibilities:
- Understanding customer requirements and project KPIs
- Implementing various development, testing, automation tools, and IT infrastructure
- Planning the team structure, activities, and involvement in project management activities.
- Managing stakeholders and external interfaces
- Setting up tools and required infrastructure
- Defining and setting development, test, release, update, and support processes for DevOps operation
- Have the technical skill to review, verify, and validate the software code developed in the project.
- Troubleshooting techniques and fixing the code bugs
- Monitoring the processes during the entire lifecycle for its adherence and updating or creating new processes for improvement and minimizing the wastage
- Encouraging and building automated processes wherever possible
- Identifying and deploying cybersecurity measures by continuously performing vulnerability assessment and risk management
- Incidence management and root cause analysis
- Coordination and communication within the team and with customers
- Selecting and deploying appropriate CI/CD tools
- Strive for continuous improvement and build continuous integration, continuous development, and constant deployment pipeline (CI/CD Pipeline)
- Mentoring and guiding the team members
- Monitoring and measuring customer experience and KPIs
- Managing periodic reporting on the progress to the management and the customer
C++
Follow Cutshort