CCTV/Networking Engineer

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

We are looking networking professionals with the following skill set,

Experience :6+ years of experience in the networking domain

Key skills:

• Must have 6+ years of experience in C/C++ programming language.
• Knowledge of Go programming language and Python programming language is a big plus.
• Strong background in L4-L7 Internet Protocols TCP, HTTP, HTTP2, GRPC and HTTPS/SSL/TLS.
• Background in Internet security related products such as Web Application Firewalls, API Security Gateways, Reverse Proxies and Forward Proxies
• Proven knowledge of Linux kernel internals (process scheduler, memory management, etc.)
• Experience with eBPF is a plus.
• Hands-on experience in cloud architectures (SaaS, PaaS, IaaS, distributed systems) with continuous delivery
• Familiar with containerization solutions like Docker/Kubernetes etc.
• Familiar with server less technologies such as AWS Lambda.
• Exposure to machine learning technologies and distributed systems is a plus

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

Roles & Responsibilities:

We are looking for a Senior Network Engineer to be responsible for the development and support of a complex networking infrastructure critical to the operation of the Company. This position will develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

• Maintain, test, and monitor complex local area and wide area network designs encompassing multiple technologies using established procedures and tools.
• Diagnose network issues and provide problem resolution in a timely manner.
• Develop and maintain all network component and system configurations.
• Design, install, and support networking systems and operations.
• Troubleshoot network performance issues.
• Analyse system errors or failures and work to resolve issues. Escalate as necessary to maximize system availability.
• Provide technical support to peers and guidance to users.
• Evaluate new network technologies and make recommendations regarding the integration of relevant technologies into the existing network. Recommend upgrades, patches, and new applications or equipment.
• Maintain knowledge of emerging technologies and enhanced applications.
• Create and maintain network systems documentation and asset management information.

Qualifications:

• 9+ years of networking systems experience is required.
• Experience with Cisco products and support services and procedures is essential; Cisco certifications are preferred, but not required.
• Expert level experience with Cisco Nexus Switching equipment required.
• Expert level experience with Cisco /FMC/ASA Anyconnect.
• Expert level experience with Cisco ISE, posturing RADIUS, TACACS.
• Experience with F5 LTM.
• Expert level experience with routing protocols (EIGRP, OSPF, BGP, DMVPN, IPSEC VPN).
• Expert level experience with L2 technologies (VPC, VTP, port channels)
• Experience with Palo Alto firewalls, and Meraki WIFI/SD WAN.
• Experience with network related tasks with AWS.
• Must be able to work flexible hours on-site and remotely.
• Must be able to work in a complex, dynamic team environment with minimal supervision and possess good organizational skills.
• Strong interpersonal skills are needed to work well with a talented team of infrastructure support personnel and application developers.
• CCIE certification - preferred
• Ability to communicate with individuals at all levels in the Company and with various business contacts outside of the company in an articulate, professional manner.
• Ability to organize, prioritize and handle multiple assignments on a daily basis.