11+ DxDesigner Jobs in India

Job Description

Experience: Senior Hardware Engineer 4-7 years

Job Location: Pune

--------------------------------------------------------------------------------------------------------------------------

Mandatory:

• Responsible for safety electronics hardware product from requirement till validation with certification body
• Design experience on Digital circuits, Analog circuits and microcontroller based design
• Experience/exposure on board bring-up testing, prototype testing and troubleshooting.
• Experience/exposure on Circuit simulation tools such as PSPICE, LTSpice and able to perform reviews
• Knowledge of schematic capture tools like Mentor Graphics DxDesigner and able to perform reviews
• Perform MATHCAD calculation (i.e. in excel or tool) based on hardware design and able to perform reviews
• Contributes to electronics hardware related functionality safety reviews
• Designs multilayer boards and worked on board stack up products
• Planning, Design, Analysis, Compliance / Precompliance Testing and Manufacturing of electronic board(s), product(s) with system understanding.
• Works closely with other engineering disciplines (e.g. mechatronics, internal and external industrial engineering, technical sales towards customer) to ensure quality, to fulfill the requirements and to reach target costs.
• Provides life cycle analysis of electronic components and suggest alternate for replacement
• Creates hardware documentation e.g. BOM, design and test specifications
• Performs activities after serial launch, e.g. change and obsolescence management.
• Good understanding of variety of electronic components and their function
• Understanding of PCB layout and able to perform Layout review

Desirable:

• Carryout FMEA/DFMEA analysis.
• Is responsible for product safety
• Requirement Engineering Certifications like CPRE
• Consults in commissioning products in the field, in order to support responsible Engineer

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

Senior hardware engineer - Power electronics

Experience: 5 to 10 years experience

Job Location: Pune

Job Description:

• Design, simulate, and develop a variety of power electronic circuits, including AC-DC, DC-DC converters
• Develop schematics using CAD tools such as Mentor and Altium and collaborate with PCB engineers on layout development.
• Support simulation activities using tools LTspice, or similar, helping to build and analyze design.
• Participate in the prototyping and testing of power electronic circuits and components under guidance.
• Help with the assembly and validation of test setups and perform measurements in the lab.
• Assist in the documentation of design details, test procedures, and results.
• Gain exposure to relevant industry standards and regulatory requirements for power electronics.
• Collaborate with other engineering disciplines to understand system-level requirements and interactions.
• Contribute to root cause analysis of issues encountered during testing or production under supervision.

Experience and Qualifications:

• B.Tech/M.Tech with specialization in Electrical or Electronics Engineering.
• Overall Experience of 5-10 Years.
• Specific experience of 2-4 years of experience in the design and development of power electronic systems like DC-DC converters or chargers.

Must Have Competencies:

• Proficiency in electric circuit design and analysis involving power devices, gate drivers and passive elements.
• Good understanding of common topologies for power converters and inverters.
• Proficiency in Microcontrollers and peripherals like PWM, ADC etc.
• Hardware and firmware debugging skills for troubleshooting.

Good to Have Competencies:

• Experience with non-idealities in power electronic devices like diodes, MOSFETs, transformers and inductors.
• Knowledge of layout and how it impacts performance.
• Knowledge of EMI/EMC compliance and safety standards like UL, VDE, IEC, or BIS.
• Proficiency in simulation and design tools such as LtSpice, PSIM, MATLAB, Allegro, or Hyperlynx.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination

Criteria:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

Description

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycle.

• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.

• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.

• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.

• Completed at least two project from high-level design to final product level deployment.

• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.

• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.

• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.

• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.

• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.

• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.

• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.

• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Education Requirements: 

B. Tech / M. Tech (ECE/ CSE/ IT)

Experience - 10 to 12 Years

 Internship Opportunity – Embedded Systems & IoT

Join our hands-on internship program designed for engineering students passionate about core tech. You'll work on real-time projects involving microcontrollers, sensors, RTOS, circuit design, and IoT protocols.

Gain exposure to AI-integrated embedded applications and build a strong project portfolio with mentorship and placement support.

Location: Bangalore (Hybrid/On-site)

Duration: 2–3 months

Eligibility: Final-year students and pre final year (ECE/EEE/CSE/Mechatronics)

#EmbeddedSystems #IoTInternship #EngineeringInternship #CoreTechCareers #Microcontrollers #RTOS #PCBDesign #IoTProjects #KnowxInnovations #AIoT #TechInternship #SkillDevelopment #HandsOnLearning #BangaloreInternship #StudentInternship

● Write Effective Codes In C++, Develop Software For Embedded Systems Based On STM32, NRF
● Support And Improve Existing Software
● Prepare Documentation For The Created Software. Qualifications
● Confident Knowledge Of C++ 17, Object-Oriented Programming, Embedded Software Development
● Proficiency With Microcontrollers Of The STM32 And / Or NRF Series
● Experience With RTOS
● Familiarity With Git, Linux
● Technical English
● Knowledge Of Python As An Advantage
● Any Experience With UAS \ UAV \ Drones is much appreciated

Hands-on experience in Autosar methodologies and workflows.

• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.

• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.

• Automotive Product Development Process knowledge (ASpice, ISO26262)

• Experience in one or more of Autosar BSW Modules stacks.

• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.

• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.

• Working knowledge on AUTOSAR ECU software architecture

• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools

• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules

• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes

• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)

Understand the flow of the AUTOSAR software from application till the underlying driver.

• Bachelors in Electronics & Communication or equivalent
• 6-10 yrs experience in embedded software development
• Hands-on embedded C skills (mandatory)
• Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
• Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
• Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
• Experience with any networking &  connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP
• Exposure to any IoT frameworks (desirable not mandatory) – IoTivity, AWS IoT, Azure IoT
• Experience with any device driver development, driver optimisation (desirable not mandatory)
• Good ability to read data sheets & technical manuals

Job Title: Project Associate - Mixed Signal Design Profile
Industry: Wireless communication, 5G
Organization: 5G TestBed-IIT Hyderabad- Hyderabad

Job Description
Work Profile:
· Work on development of custom Analog circuit boards for applications related to RF, interfaces etc.
· Implement new features and bug fixes
· Verify analog/mixed-signal integrated circuits
· Develop test cases to verify new features and bug fixes
· Review and update the user manuals for software tools.
· Supporting digital modelling of analog circuits for mixed-signal verification
· Creating design specifications and circuit schematics
· Work both independently and in a team environment, with the opportunity to provide technical leadership to other members of the engineering team
· Create and/or modify specification documents detailing system design and enhancements to meet marketing requirements
· Collaborate with others in the creation of technical reports, whitepapers, and user documentation

Requisites:
· EE/EEE/ECE graduate, undergraduate degree from reputed Tier 1 or Tier 2 colleges .
· Strong knowledge of analog integrated circuit design fundamentals
· Proven experience taking designs from concept to production
· Experience in analog/mixed-signal IC design & verification
· Understanding of BJT, CMOS and Op-Amp technologies.
· Good understanding of analog/mixed-signal design flows (Cadence, Synopsys)
· Transistor and system level simulation skills
· Discrete time and continuous time signal processing skills
· Strong lab and silicon validation skills
· Verilog based digital design and test bench development, is a plus
· Strong communication skills, both written and verbal
About us:
For more details please visit: http://5g.iith.ac.in/
IIT Hyderabad in collaboration with top Indian institutes including IITM, CEWiT, IITD, IITK, IISC and SAMEER is building the largest 5G testbed of the country, with the support of Department of Telecommunications (DoT) Govt. of India. This project will create a 5G prototype and testing platform that will be developed under the guidance of IIT-H faculty.
The project will deliver an end-to-end 5G testbed comprising 5G BS and UE nodes that support enhanced mobile broadband (eMBB), Ultra low latency communication (URLLC), and massive MTC including NB IoT services. The operating frequently includes both sub 6 GHz and mmwave frequencies. The system will exceed IMT 2020 5G performance requirements including Low Mobility Large Cell (i.e.., LMLC) targets introduced by India at ITU.
The 'Indigenous 5G Testbed' project is a long-term effort with a team of 100+ researchers/engineers based out of IIT-H campus.