- 32-bit Microcontroller knowledge is essential (ARM Cortex based micro-controllers (STM32).
- Esp32 architecture knowledge is essential.
- Strong experience in C, C++, Free-RTOS
- Strong experience in CUBEMX IDE, MDK Version 5 – Keil, Arduino IDE environment
- Good knowledge in HW and communication protocols like CAN, SPI, UART, I2C, USB
- Good knowledge in TFT Displays and Sensors is added advantage
- Good knowledge of implementation of motor controls as required, pulse width modulation schemes (PWM).
- Good knowledge of power electronics (TRIACs, MOSFETs, IGBTs, gate drivers) and require protections (Over/under voltage/current).
- Document firmware designs, specifications, test plans, revisions and produce test reports
Similar jobs
Job Responsibilities
Responsibilities for this position include, but are not limited to, the following.
Understand requirements and create low-level design using UML
Develop embedded software as per defined software requirements
Software integration & testing
Background & Skills
Education:
B.E/B. Tech/M.Tech/Master (Electronics/Telecommunications/Computers Science)OR equivalent
Experience & Attributes:
2-8 years’ experience in Embedded system software design, development, and testing.
Excellent communication skills, spoken and written English
Must have specialized knowledge :
· Embedded C
· Electronics
· RTOS
· Knowledge of Microcontrollers (RISC, CISC)
· CAN Communication & Protocols like UDS, KWP2000, CANopen and J1939
· MISRA standard - 2000/MISRA 2012
· SDLC, Agile Scrum
· Static analysis & Tools like LDRA or QAC or Vector cast
· Change Management & Tools like JIRA/VSTS
· Version control & Tools like SVN/GIT/Clearcase
· Traceability management & Tools like Reqtify or equivalent
· Design methodologies - like UML
· Software Test Life Cycle
Specialized knowledge – Will be Preferred
· Functional Safety life-cycle & Management - Applies to software design & development
· Safety standards like - IEC-61508, ISO-26262, ISO-25119, ISO-13849
Key Tasks and Responsibilities
· Software requirement specification writing
· Creating design for assigned modules
· Implementing the code for assigned requirements
· Perform unit testing
· Perform peer reviews or inspection of software work products
· Support testing team on defect analysis
· Adhere to Quality processes
Automotive Embedded Developer
Experience: 3-8 Years
Location: Bangalore, Hyderabad, Chennai, Pune, Thiruvananthapuram, Calicut
Company: Tata Elxsi
Skills : Embedded C, CAN Protocol, Vector Tools, Aspice. Design and Development of ECU
Desired Candidate Profile For Embedded Developer Role
1. Proficient in C language
2. Proficient in Linux application development, TCP/IP protocol, multi-threaded programming, basic encryption algorithm,
3. familiar with Linux system commonly used API and commands, proficient in basic debugging means and methods.
4. Proficient in STM32 and other SCM development, skilled in using Keil and other integrated development environment,
5. proficient in serial port communication programming, Bluetooth, GPIO, SPI, EEPROM and other development, proficient in basic debugging means and methods.
6. Have basic hardware skills and knowledge, can draw PCB and read circuit diagrams, can use an oscilloscope and other tools for debugging.
7. Familiar with embedded system, free-RTOS, RT-Thread, etc.
8. Fluency in both spoken and written English.
Location : Hyderabad
Qualifications: BE/BTECH from EE/EC
Experience : 3-5 Years
Desired Candidate Profile:
-Development of Embedded device drivers, Ethernet, USB, SPI.
-Able to read data sheets.
-Good debug skills.
-Board bring up skill.
-Worked on application processor type boards( T2080/2081 etc. )
-Strong in embedded C
-Proficient in board bring up and device drivers is needed.
-System programming and building multi-platform SDK on Linux or other OS is desirable.
-Onsite system integration.
-Should have hands on debugging experience.
-Candidate is expected to have strong knowledge of C and C++.
-Understanding and experience using structured programming techniques.
Job Type: Full-time
Salary: ₹300,000.00 - ₹700,000.00 per year
Schedule:
Morning shift
Ability to commute/relocate:
hyderabad, Hyderabad - 500003, Telangana: Reliably commute or planning to relocate before starting work (Required)
Experience:
total work: 3 years (Preferred)
Developer Software (Embedded)
Location: Udaipur
Qualification: BE in (Electrical/Electronic Engineering)
Technical
· Experience in design and development with structured Software Development Life Cycle for embedded applications
· Proficiency in C language or assembly programming, Microcontroller, Micro Processor.
· Preferably experience in working and understanding the metering domain
· Proficiency in development processes, tools/IDE (KEIL, IAR, Eclipse) & test automation
· Unit testing skill
· Interface RS485, RS232, SPI, I2C, USB, LCD, Keypad, Flash, EEPROM
· Coding Standards and MISRA rules are preferable
· Knowledge of ARM / MIPS / Coldfire / MSP430 / dsPIC / 8051 and other popular processor
· Experience in working on communication products based on GPRS, ZIGBEE, ZWAVE, Ethernet, Power line communication, DLMS, MODBUS
Job Description
· Understand improvement requirements and develop improvement solutions & package, according to technical specifications / high-level solution design
· Responsible to carry out effective and timely unit testing, in order to, deliver first time right solutions
· Development of automation framework/compiler / emulators to speed up business delivery cycle in NPI programs
· Keep track of new trends, continuously learn and self-develop skills by ensuring effective knowledge sharing through group meetings and training. Impart training to new joiners as and when assigned
· Proficiency in developing embedded software design with high reusability using relevant tools and BSM or flow diagram
Omnitroncis is on a mission to bring robotics to real-life applications. We build & provide services for smart products. At the heart of each product is the amazing team which integrates software, hardware, sensors, AI, computer vision systems, machine learning models and robotics to orchestrate and automate the entirety of products and operations. As a result, we are able to lead better lives.
About Us:
This is an opportunity to join a growing team of electrical, mechanical and software engineers and make a substantial impact at Omnitronics. We are looking for someone that can learn, adapt and roll with a fast-paced, ever-changing environment and who isn’t afraid of uncertainty. Embedded engineering at Omnitronics involves developing electronics solutions that power a modern smart device. This involves unique industrial control systems, environmental sensor technology, data collection, computer vision systems, and automation. You ll be involved with idea generation, design, prototyping, planning, and the execution of firmware and hardware for our IoT devices.
Prerequisites
- We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
- Behavioural Attitude: Must be a Quick learner / Highly Dedicated / Responsible person
Require Person: 7
Job Type: Full-time
Office Timing: 10:00 am to 7:00 pm
Expected Start Date: ASAP
Fresher Salary: 3,000 to 15,000
Experience Salary: 10,000 to 45,000
Location: Must be from Surat, Gujarat
Below are the skills we are looking for in a candidate.
- Strong hands-on C/C++, Embedded System Development
- Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
- Good to have Python, Shell/Bash Scripting, Toolchains
- SPI, I2C, UART, RS485, CAN, and hardware subsystems
- Hardware and IoT / IT Communication protocols knowledge
- Problem-solving and analytical skills.
- Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
- Schematic / PCB Designing verification
- Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
- Design, develop, code, test, and debug system software.
We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controller. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.
Thanks and Best Regards
Role: Senior Firmware Engineer Experience: 2-6 years Work Mode: Work from Office Location: Hyderabad Notice Period: Immediate to 30 days Mandatory Skills: Embedded C Programming, Debugging, Configuration Management Budget Range: As per Market Standards · The ideal candidate is a self-motivated, multi-tasker, and demonstrated team-player. · You will be an individual contributor responsible for the development of new software products and enhancements to existing products. · You should excel in working with Application (ASW) and Base software (BSW) components and have outstanding communication and leadership skills.
· Understand & Review System Requirements, System Architecture · Participate in CFT Meetings for Requirements Clarity · Develop & Enhance Software Requirements · Develop & Enhance Software Architecture · Understand / Review / Change Software Design Documents · Writing clean, high-quality, high-performance, maintainable code · Participate in Software Code Reviews · Review Test Scenarios developed for SWE4, SWE5 and SWE6 · Perform Investigation and provide Root Cause Analysis for failures · Support test and deployment of new products and features
· Embedded C Programming · Excellent Debugging skills · 16-bit or 32-bit Micro Controllers · Ability to interpret circuit and schematics · Knowledge of CAN and LIN communication protocols and UDS diagnostics · Knowledge of Sensors, Motors, and Closed Loop Control · Knowledge of Memory and Timing Analysis · Experience in Configuration Management (SVN, IBM Rational, JIRA) · Experience in Debugging using CRO, Debuggers, CANalyzer / CANoe · Working knowledge of ISO 26262 Functional Safety requirements · Good exposure to End-to-End product development · Knowledge about Automotive Standards – ASPICE · Perform Safety Analysis and Impact Analysis based on ISO26262 recommendations · Exposure to CAPL, Python and LabView
|
Responsibilities:
IoT Deployment (on-field) and maintenance
Lead assembly, testing, and finalization of IoT products
Black Box Testing: BLE, WiFi
Integration testing: (IoT, backend, and Android)
Test report and deployment setup documentation
Apply quality engineering principles throughout the Agile product lifecycle.
Collaborate closely with cross-functional teams.
Required qualifications:
2021/2022 passed out B.Tech Graduate in ECE or EEE
Hands-on experience with microcontrollers like Arduino and ESP.
Knowledge of C programming language.
Excellent communication and critical thinking skills.
Good organizational skills and a detail-oriented mindset.
Ability to work in a fast-paced environment with minimal supervision.
Sense of ownership and pride in your performance and its impact on the company’s success.
Team player.
Good time management skills.
Preferred qualifications:
Good understanding of embedded and IoT systems.
Who can apply
Only those candidates should apply who
are available for full-time (in-office)
can start the Job immediately
are from Mumbai
have relevant skills and interests
- Work directly with the other Software/Firmware Engineers and Electrical/RF/Systems Test Engineers to write needed software
- Design and implement software platform for firmware on embedded CPUs with multiple OS such as Windows, Linux, FreeRTOS, TI-RTOS and embedded Linux
- Use compliers, debuggers revision control and automated build systems.
- Design/develop components of software platform for use by other developers to extend its capabilities and build custom applications/behavior on top
- Develop build methodologies, debugging tools/utilities
- Develop and release Software using Agile methodology
- Write unit tests and support continuous integration and automated test methodology
- Brainstorm for new ideas and ways to improvement product and processes
- Consult with peers for feedback during debug/testing stages
- Document and maintain design processes