Embedded Developer

Job Summary:

Conceptualize, designs, codes, debugs and performs development activities in accordance with designated standards and procedures to meet specific project requirements. Shares technical expertise and provides training and guidance to other team members.

Essential Job Duties and Responsibilities:

• Using the current programming language and technologies provide creative, thorough and practical solutions to a wide range of technical problems.
• Share technical expertise within the department and other departments as requested.
• Analyze and contribute to system and subsystem requirements specifications and design definitions.
• Design, develop and test of applications and programs to support the company’s products.
• Design, develop and test software programs following established quality standards and in accordance with internal engineering procedures including coding, unit testing, peer reviews and software configuration control.
• Complete high- and low-level detailed software design specifications, storyboards and interface specifications.
• Provide support of products through conception to product delivery including problem solving, defect maintenance and support to customer services (which may require out of hours support in certain circumstances).
• Prepare reports, manuals, procedures and status reports.
• Provide training and guidance to other team members.
• Supports the bids and proposal and customer variation requests.
• Keeps abreast of improvements and developments within software engineering, supporting continuous improvement within engineering.
• Comply with Cubic’s values and adherence to all company policy and procedures. In particular, comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures.
• In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them.

Education and Qualifications

Essential:

• Bachelor of Science degree in computer science, electrical engineering, or related field or equivalent professional experience or combination of both.

C++ Embedded development experience requirements:

• 6+ years of C++ experience (C++ 11 C 14 is mandatory )
• Delivered highly functional, performance-driven, user-friendly applications.
• Proficient client-side development experience.
• Experience in developing multi-threaded applications.
• Experience with REST, JSON C web services.
• Experience using a crash reporting solution.
• Experience of debugging on target hardware.

Essential:

• Experience in Software Engineering with a proven track record of specification, design and development.
• Demonstrable experience of defining test plans and test data requirements.
• An effective problem solver with the ability to understand and resolve complex issues.
• Experience in troubleshooting and debugging applications.
• Organized with the ability to prepare reports, manuals, procedures and status reports.
• Experience of Object-Oriented Design (e.g. UML) and implementation, along with Design patterns.
• Ability to contribute to the development of the architecture for applications.
• Experience of maintaining and improving coding standards.
• Able to build reusable code and libraries, ensuring thorough application documentation for future use.
• Experience of software best practices such as Automated Testing (Google Test and VSTest), Continuous Integration, Test Driven Development, SOLID and Clean Code principles.
• Scrum or Kanban experience. GIT and Jenkins experience.
• Experience using DOORS, Test Rail and JIRA
• Experience working with test teams to optimize application performance.

Talented C++ Developer who has experience in design, development, debugging of multi-threaded large scale application with good understanding in data structures on Linux packaging, functional testing and deployment automation very good with problem solving.

Key responsibilities :

1. Understand fundamental design principles and best practices for developing backend servers and web applications
2. Gather requirements, scope functionality, estimate and translate those requirements into solutions
3. Implement and integrate software features as per requirements
4. Deliver across the entire app life cycle
5. Work in a product creation project and/or technology project with implementation or integration responsibilities
6. Improve an existing code base, if required, and ability to read source code to understand data flow and origin
7. Design effective data storage for the task at hand and know how to optimize query performance along the way
8. Follow an agile methodology of development and delivery
9. Strictly adhere to coding standards and internal practices; must be able to conduct review code
10. Mentor and possibly lead junior developers
11. Contribute towards innovation
12. Performance optimization of apps
13. Explain technologies and solutions to technical and non-technical stakeholders
14. Diagnose bugs and other issues in products
15. Continuously discover, evaluate, and implement new technologies to maximize development efficiency

Must have / Good to have:

1. 5-7years' experience with C++ development and relevant 3+yrs in modern version 11/14/17 would be a plus. 
2. Design and implementation of high-availability, and performance applications on Linux environment
3. Advanced knowledge of C/C++, Object Oriented Design, STL
4. Good with multithreading and data structures
5. Develop back-end components to improve responsiveness and overall performance
6. Familiarity with database design, integration with applications and python packaging.
7. Familiarity with front-end technologies (like JavaScript and HTML5), REST API, security considerations
8. Familiarity with functional testing and deployment automation frameworks
9. Experience in development for 3-4 production ready application using C++ as programming language
10. Experience in writing unit test cases including positive and negative test cases
11. Experience of CI/CD pipeline code deployment (Git, SVN, Jenkins or Teamcity)
12. Experience with Agile and DevOps methodology
13. Very good problem-solving skills
14. Experience with Web technologies is a plus. 

Read less

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

Omnitroncis is on a mission to bring robotics to real-life applications. We build & provide services for smart products. At the heart of each product is the amazing team which integrates software, hardware, sensors, AI, computer vision systems, machine learning models and robotics to orchestrate and automate the entirety of products and operations. As a result, we are able to lead better lives.

About Us:

This is an opportunity to join a growing team of electrical, mechanical and software engineers and make a substantial impact at Omnitronics. We are looking for someone that can learn, adapt and roll with a fast-paced, ever-changing environment and who isn’t afraid of uncertainty. Embedded engineering at Omnitronics involves developing electronics solutions that power a modern smart device. This involves unique industrial control systems, environmental sensor technology, data collection, computer vision systems, and automation. You ll be involved with idea generation, design, prototyping, planning, and the execution of firmware and hardware for our IoT devices.

Prerequisites

• We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
• Behavioural Attitude: Must be a Quick learner / Highly Dedicated / Responsible person

Require Person: 7

Job Type: Full-time

Office Timing: 10:00 am to 7:00 pm

Expected Start Date: ASAP

Fresher Salary: 3,000 to 15,000

Experience Salary: 10,000 to 45,000

Location: Must be from Surat, Gujarat

Below are the skills we are looking for in a candidate.

• Strong hands-on C/C++, Embedded System Development 
• Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
• Good to have Python, Shell/Bash Scripting, Toolchains
• SPI, I2C, UART, RS485, CAN, and hardware subsystems
• Hardware and IoT / IT Communication protocols knowledge
• Problem-solving and analytical skills.
• Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
• Schematic / PCB Designing verification
• Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
• Design, develop, code, test, and debug system software.

We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controller. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.

Thanks and Best Regards

• Bachelors in Electronics & Communication or equivalent
• 6-10 yrs experience in embedded software development
• Hands-on embedded C skills (mandatory)
• Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
• Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
• Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
• Experience with any networking &  connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP
• Exposure to any IoT frameworks (desirable not mandatory) – IoTivity, AWS IoT, Azure IoT
• Experience with any device driver development, driver optimisation (desirable not mandatory)
• Good ability to read data sheets & technical manuals

• Technical Experience on Physical Layer of 3GPP LTE Experience on DSP Development\
• Proficient in C
• Good understanding of Wireless Communications
• Experience on MAC-PHY interface
• Behavioral Interpersonal skills & Ability to work in team
• Good Communication Skills Good Analytical Skills
• Customer Orientation Job Title LTE Developer with DSP Physical Layer(Engineer/Senior Engineer)