6+ Quality control Jobs in Mumbai | Quality control Job openings in Mumbai

The Quality Assurance Engineer is responsible for implementing and maintaining quality control processes to ensure that our products meet regulatory requirements and Environmental norms. We should work closely with cross-functional teams to identify quality issues, implement corrective actions, and continuously improve product quality and reliability.

• Quality Control Processes: Develop and implement quality control processes and procedures for manufacturing environmental products. Define quality metrics and standards to ensure compliance with regulatory requirements and customer specifications.

• Product Testing and Validation: Design and execute comprehensive testing protocols to validate the performance, reliability, and safety of composting machines, incinerators, and other environmental equipment.

• Regulatory Compliance: Ensure that environmental products comply with relevant regulatory standards and certifications, such as EPA regulations, ISO standards, and industry-specific requirements. Stay updated on changes in regulations and ensure product designs and manufacturing processes remain compliant.

• Root Cause Analysis: Investigate quality issues and customer complaints to identify root causes and implement corrective and preventive actions. Use problem-solving techniques such as root cause analysis, failure mode and effects analysis (FMEA), and 5 Whys to address quality issues and improve product reliability.

• Documentation and Reporting: Maintain accurate records of quality control activities, test results, and corrective actions taken. Prepare quality reports and metrics to track product quality, defects, and non-conformances. Communicate quality-related information to stakeholders, including management, engineering teams, and production staff.

• Training and Development: Provide training and support to production staff on quality control processes, procedures, and best practices. Promote a culture of quality and accountability throughout the organization by fostering a commitment to excellence and continuous improvement.

• Continuous Improvement: Drive continuous improvement initiatives to enhance product quality, manufacturing processes, and quality control procedures. Implement lean manufacturing principles and quality management methodologies to optimize efficiency and minimize waste.

Qualifications and experiences:

• Bachelor’s degree in engineering, preferably Mechanical/Electrical/Quality assurance/Quality management.

• Strong understanding of quality management principles particularly in manufacturing.

• Familiarity with relevant regulatory standards applicable to environmental products ISO 9001/14001/OSHAS etc.

• Proficiency in data analysis and problem-solving techniques to identify root causes of quality issues, implement corrective action.

• Strong attention to detail and accuracy in performing quality control tasks, documenting test results, and ensuring compliance with quality standards.

• Experience with Quality Management Systems, Familiarity with quality management systems (QMS) and quality control processes,

What are we looking for - 

• Minimum 1 Year of experience in a Data Entry/Operations role
• Strong communication and interpersonal command.
• Ability to thrive independently or as part of a team.
• Ability to multitask
• Organizational and time management skills.
• Attention to detail
• Growth oriented mindset
• In-office availability in Delhi/Mumbai/Bangalore

What you will be doing - 

• End-to-end Visa application processing for assigned countries
• Document verification, form filling, and pre-checks for visa submissions
• Coordinate seamlessly with Account Managers, Travel agents, & Accounts team
• Manage vendor relationships, ensure timely pickups/drop-offs.
• Update daily dashboards, trackers, and internal tool with application status
• Monitor progress of active applications and escalate delays proactively
• Maintain compliance with embassy, consulate, and country-specific requirements
• Adhere to TATs (Turnaround Times) and ensure SLAs are consistently met

Job Title: QA/QC Engineer – Facade

🎯 Key Responsibilities

• Develop and implement quality control procedures for facade production
• Inspect raw materials, in-process components, and finished facade units
• Ensure compliance with ISO standards, local building codes, and client specifications

🔍 Testing & Inspection

• Conduct mechanical, thermal, and performance tests on facade elements
• Maintain inspection records, test results, and corrective action reports
• Oversee mock-up testing and performance validation
• Maintain quality manuals, SOPs, and inspection checklists

🤝 Coordination

• Coordinate with design, production, and project teams to ensure quality alignment
• Support external audits and client inspections
• Train factory staff on quality standards and best practices

📚 Qualifications

• Bachelor’s degree in Mechanical, Civil, or Industrial Engineering
• (Facade engineering or materials specialization preferred)
• 3–5 years of QA/QC experience in facade manufacturing or construction
• Strong knowledge of facade systems (aluminum, glass, cladding, curtain walls)
• Familiarity with ISO 9001, ASTM, EN standards, and local building regulations

🛠 Skills & Competencies

• Strong analytical and problem-solving skills
• Proficiency in QA/QC tools
• Excellent communication and reporting skills

📍 Work Environment

• Factory-based role with occasional site visits
• Interaction with production lines, testing labs, and project teams
• Strict adherence to safety protocols and PPE usage

Hiring: QA/QC Engineer – Facade

3–5 years experience in facade QA/QC. Responsible for quality control, inspections, testing, ISO compliance, audits, and coordination with production & project teams. Knowledge of aluminum, glass, curtain wall systems required.

Key Responsibilities

1. Material & Production Quality Control

 Inspect incoming façade materials (aluminum profiles, glass, brackets, sealants,

fasteners, etc.) for compliance with approved specifications.

 Monitor façade fabrication processes, including cutting, machining, assembly, and

glazing to ensure adherence to quality standards.

 Verify proper calibration and operation of machinery used in façade production.

 Conduct in-process and final inspections of façade panels and units.

2. Installation Site Quality Control

 Inspect façade installation on-site, ensuring alignment, fixing, sealing, waterproofing,

and thermal insulation meet approved drawings and method statements.

 Monitor installation tolerances, anchorage systems, and structural safety

requirements.

 Identify non-conformities at the site and ensure corrective actions are implemented.

3. Testing & Compliance

 Conduct or supervise façade-related tests such as water penetration tests, air

infiltration tests, structural load tests, adhesion tests, and visual inspections.

 Ensure compliance with project specifications, international standards (ASTM, BS,

EN, ISO), and local building regulations.

 Prepare and maintain test reports, inspection checklists, and NCRs (Non-

Conformance Reports).

4. Documentation & Reporting

 Maintain detailed QC documentation including ITPs (Inspection & Test Plans), MIRs

(Material Inspection Requests), WIRs (Work Inspection Requests), and QC daily

logs.

 Support QA/QC Manager in compiling QA documentation for project handover.

 Track and follow up on corrective actions and improvements.

5. Coordination & Communication

 Coordinate with production supervisors, site engineers, project managers, and

subcontractors regarding quality issues.

 Participate in quality meetings, site inspections, and audits.

 Provide technical guidance and training on quality procedures for façade works.

Qualifications & Skills

Education

 Diploma or Bachelor’s Degree in Civil Engineering, Mechanical Engineering,

Architecture, or related field.

Experience

 2–7 years of experience in façade QC, curtain wall systems, cladding, or

aluminum/glass fabrication.

 Knowledge of façade materials, production processes, and installation techniques.

Technical Skills

 Familiarity with quality standards: ASTM, EN, BS, ISO.

 Ability to read engineering drawings and façade shop drawings.

 Knowledge of QA/QC procedures, ITPs, and NCR management.

 Understanding of façade testing procedures.

Develop and implement quality standards

• Develop and implement quality control systems

• Monitor and analyze quality performance metrics

• Inspect and test materials, equipment, processes, and products to ensure quality specifications are met

• Collaborate with operations managers to design and implement controls and improvements

• Ensure workflows, processes, and products comply with safety and regulatory standards

• Investigate and troubleshoot product or production issues

• Develop corrective actions, preventive measures, and continuous improvement solutions

• Review codes, specifications, technical documents, and processes to maintain quality consistency

Role Overview

We are seeking an experienced Manager - Quality Control with 5-10 years of experience in brand jewelry

manufacturing. The ideal candidate will have a strong technical background, people management skills, and

direct experience handling customer interactions. This role demands a thorough understanding of jewelry

processes, quality control methodologies, and technical specifications.

Location: Andheri East, Chakala, SEEPZ

Compensation: ₹15 to ₹18 LPA

Day to Day-Key Responsibilities

 Lead and manage the quality control department, ensuring all jewelry production meets the highest

standards.

 Oversee customer interactions for the past 5 years, managing client expectations and addressing

quality concerns directly.

 Apply Quality Control (QC) tools to monitor and improve the production process.

 Ensure compliance with jewelry specifications, including the use of CAD models, CAM, and four-

view designs for accurate product realization.

 Supervise the entire jewelry manufacturing process, including setting tools, polishing, buffing, filing,

and other related activities.

 Identify and address rework and rejection areas in production and prepare Corrective and Preventive

Action (CAPA) plans.

 Train and mentor team members in QC tools and methodologies.

 Work collaboratively with production, design, and customer service teams to ensure all jewelry

products meet design specifications and customer requirements.

Qualifications

 Engineering Graduate or equivalent qualifications in a related field.

 5-10 years of experience in brand jewelry manufacturing, with a strong background in Quality Control.

 Proven experience handling customer interactions in the last 5 years.

 Certification or training in Quality Control tools is preferred.

 Strong understanding of the mechanicals, CAD/CAM, and specifications of jewelry designs.

 Expertise in all jewelry production processes, including setting, polishing, filing, and tool usage.

 Excellent communication and people management skills.

Skills & Competencies:

 Proficient in CAD/CAM software and able to interpret technical design specifications.

 Strong problem-solving abilities with a focus on quality improvement and process optimization.

 Able to lead and motivate teams effectively.

 Capable of preparing and implementing CAPA plans to minimize product rework and rejection.