11+ Internationalization and localization Jobs in Delhi, NCR and Gurgaon | Internationalization and localization Job openings in Delhi, NCR and Gurgaon

Senior Robotics Engineer (ROS 2 Migration & Systems) - WorkFlow

Department: R&D Engineering

Location: Octobotics HQ (Noida/On-Site)

The Mission

To successfully migrate our legacy ROS 1 architecture to a high-performance ROS 2 Native ecosystem, architecting a navigation stack that survives the "unheard-of" edge cases of the real world.

1. The Context: The Great Migration

Octobotics is at a pivot point. Our legacy stack was built on ROS 1 (Noetic). It got us to MVP.

But to scale, we are tearing it down and rebuilding in ROS 2 (Humble/Iron).

We are not looking for someone to maintain old code. We are looking for an Architect to lead this migration. You will deal with the pain of bridging ros1_bridge, porting custom messages, and rewriting node lifecycles from scratch.

If you are afraid of breaking changes and complex dependency hell, stop reading now.

2. The "Scorecard" (Outcomes)

• The Migration: Port our core navigation and control logic from ROS 1 to ROS 2. This involves rewriting nodes to utilize Lifecycle Management and Node Composition for zero-copy transfer.
• Nav2 Architecture: We don't just "install" Nav2. You will write custom Behavior Tree plugins and Costmap layers to handle dynamic obstacles in unstructured environments.
• Middleware Optimization: You will own the DDS layer (FastDDS/CycloneDDS). You must tune QoS profiles for lossy WiFi environments and debug discovery traffic issues that traditional network engineers don't understand.
• Sensor Fusion & State Estimation: Implement and tune EKF/UKF pipelines (robot_localization) to fuse IMU, Wheel Odometry, and LiDAR. You must understand Covariance Matrices—if your covariance grows unbounded, you have failed.
• Serialization Strategy: Implement Protocol Buffers (Protobuf) for high-efficiency, non-ROS internal data logging and inter-process communication where overhead must be zero.

3. Technical Requirements (The Hard Skills)

The Stack (ROS 1 & ROS 2):

• Deep ROS 2 Mastery: You know the difference between spin(), spin_some(), and Multi-Threaded Executors. You understand why we are moving to ROS 2 (Real-time constraints, DDS security, QoS).
• Navigation Stack: In-depth knowledge of Nav2 (Planners, Controllers, Recoveries). You understand Global vs. Local planners (A*, DWB, TEB).
• SLAM & Localization: Experience with Graph-based SLAM (Cartographer, SLAM Toolbox). You know how to close loops and optimize pose graphs.

The Math (The "Weeder"):

• Linear Algebra & Geometry: Rigid body transformations are your second language. You understand Quaternions, homogeneous transformation matrices ($T \in SE(3)$), and how to avoid Gimbal Lock.
• Kinematics: You can derive Forward and Inverse Kinematics for Differential Drive and Ackermann steering chassis.
• Probabilistic Robotics: Understanding of Bayesian estimation. You know that sensors are noisy and that "Ground Truth" is a myth.

The Code:

• C++ (14/17): Real-time safe coding standards. RAII, Smart Pointers, and template metaprogramming.
• Python: For prototyping and complex orchestration.

4. The "Topgrading" Filter (Do NOT apply if...)

• You think roslaunch is the same as ros2 launch.
• You have never defined a custom .msg or .srv file.
• You struggle to visualize a TF tree in your head (map -> odom -> base_link).
• You think latency "doesn't matter" in a control loop.

5. The Challenge: Surfing the Tsunami

Let’s be honest: AMR (Autonomous Mobile Robots) is hard.

We are solving problems that are unheard of in the standard "warehouse" world. We deal with dynamic crowds, changing lighting, and network black holes.

There will be days when the Sensor Fusion drifts for no reason. There will be days when the DDS discovery fails because of a multicast storm. There will be architectural "Tsunamis" that threaten to wipe out our sprint.

We are looking for the engineer who doesn't run for higher ground, but grabs a board and says, "I’m ready to surf."

Job Summary

We are seeking a highly skilled and motivated Linux Device Driver Engineer with strong C/C++ programming skills and hands-on experience in Linux driver development. The ideal candidate will have a proven track record of working with kernel modules and hardware interfaces, and be comfortable debugging and optimizing low-level system software.

Key Responsibilities

• Porting existing Linux device drivers to new platforms, SoCs, and kernel versions.
• New driver development for custom hardware components and peripherals.
• Debugging kernel and driver-level issues using industry-standard tools.
• Integration & bring-up of hardware with Linux-based systems.
• Collaborate with hardware teams to interpret specifications and enable device functionality.
• Optimize drivers for performance, reliability, and resource efficiency.
• Write clear technical documentation for driver APIs, design, and integration steps.

Required Skills & Qualifications

• Bachelor’s/Master’s in Computer Science, Electronics, or related field.
• 4 to 8 years of professional experience in software development.
• Strong proficiency in C/C++ programming and memory management.
• Hands-on experience with any Linux device driver (character, block, network, USB, PCIe, I2C, SPI, etc.).
• Good understanding of Linux kernel architecture, module programming, and build systems.
• Knowledge of interrupt handling, DMA, and device tree configuration.
• Familiarity with cross-compilation and embedded Linux toolchains.
• Experience with debugging tools (GDB, ftrace, perf, printk, etc.).
• Version control experience (Git).

Preferred Skills

• Exposure to multiple driver types (networking, storage, multimedia, etc.).
• Experience with Yocto, Buildroot, or similar embedded Linux environments.
• Knowledge of real-time Linux and RT patches.
• Scripting knowledge (Python, Bash) for testing and automation.

Soft Skills

• Strong analytical and debugging skills.
• Good communication and collaboration abilities.
• Ability to work independently and take ownership of deliverables.

About Statcon Electronics 

Statcon Electronics India Limited Statcon Electronics India Limited is a company specializing in the field of power electronics since its inception, with its roots going back to 1986. It has held prestigious clientage both nationally and internationally, with ABB, Alstom, BHEL, Indian Air Force, Indian Army, Indian Railways, GAIL, and Indian Oil, to name a few. SEIL has a diverse portfolio, spanning across 4 sectors – Railways, Power, Defence and Solar energy.  

About the position 

We are looking for a multiple embedded software engineers with experience in developing firmware for controlling power electronics systems. Openings are available for senior and principal engineer positions across multiple product streams, and target markets include the Indian subcontinent, Africa and North America. 

Required Technical skills 

• Demonstrated experience in developing embedded firmware for real-time power electronics systems using 16/32 bit ARM microcontrollers (ST Microelectronics preferred).  
• Must have shipped at least 1 major relevant product to the market which meets standard industry specifications. Experience with designing for North American/European markets a plus. 
• Experience with common communication protocols such as SPI, I2C, USB, UART, Bluetooth, Ethernet, RS232, and RS485 
• Experience with peripherals and systems such as ADC, DAC, timer, GPIO, PWM, DMA, NVIC, serial and parallel interfaces, memory, bootloaders and watchdog timers 
• Proficiency in advanced algorithm development using Embedded C 
• Experience with embedded software tools such as editors, assemblers, compilers, debuggers, simulators, emulators and Flash/OTP programmers. 
• Thorough understanding of power electronics topologies and control strategies 
• Good grasp over digital signal processing techniques 
• Ability to read and interpret component datasheets, PCB schematics and layout design 
• Familiarity with using measurement devices such as oscilloscopes, multimeters, function generators and logic analyzers to bring up and debug hardware 
• Demonstrated knowledge of firmware development best practices (code reviews, unit tests, Software Configuration Management, version control using git etc.) 
• Excellent documentation skills, and a good grasp over the English language 
• Comfort in using modern collaborative tools such as Slack/Microsoft Teams, JIRA/Trello/Microsoft Planner, Confluence/Microsoft OneNote and the like. 

Bonus Technical skills 

• Experience using at least one scripting language, preferably Python 
• Experience with designing for North American/European markets 
• Experience with designing for IEC and BIS standards 
• Familiarity with EMI/EMC process 
• Ability to simulate power electronics systems using Simulink/MATLAB or equivalent open-source tools 
• Familiarity with agile software development processes 
• Experience with Linux administration using command line 

Soft skills 

• Ability to mentor junior engineers and generate testing procedures for people of all skill levels 
• Excellent inter-personal skills 
• Strong attention to detail with the ability to work on tight deadlines 
• Team player with the ability to work independently under minimal supervision 
• Excellent problem-solving skills 
• Ability and desire to learn new technologies quickly 

Qualifications 

• Junior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 1 year of industrial experience, or a Bachelor's with 3 years of relevant industrial experience. 
• Senior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 4 years of industrial experience, or a Bachelor's with 6 years of relevant industrial experience. 
• Principal Engineer: A Master's (preferred) in Electrical /Electronics/Computer Engineering with 8 years of industrial experience, or a Bachelor's with 10 years of relevant industrial experience. 

Responsibilities 

• Develop, implement and test cutting-edge algorithms for medium and high-power AC-DC, DC-AC and AC-AC conversion of 1 phase and 3 phase AC systems up to 440 V AC, and DC-DC conversion of systems up to 1000 V DC. 
• Develop sensing and IoT solutions for power electronics embedded systems 
• Convert product requirements into technical specifications for Indian and international markets 
• Cover all stages (pertaining to firmware) of V model for product development 
• Generate technical documentation describing product functioning and test procedures for hand-off to SQA 
• Debug product failures in the field using data-driven analysis techniques 
• Mentor junior engineers 
• Host research talks on emerging technologies within the company 

Statcon Electronics is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, age, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Statcon Electronics is committed to creating a dynamic work environment that values diversity and inclusion, respect and integrity, customer focus, and innovation. For more information, visit www.sindia.co.in. 

Talented C++ Developer who has experience in design, development, debugging of multi-threaded large scale application with good understanding in data structures on Linux packaging, functional testing and deployment automation very good with problem solving.

Key responsibilities :

1. Understand fundamental design principles and best practices for developing backend servers and web applications
2. Gather requirements, scope functionality, estimate and translate those requirements into solutions
3. Implement and integrate software features as per requirements
4. Deliver across the entire app life cycle
5. Work in a product creation project and/or technology project with implementation or integration responsibilities
6. Improve an existing code base, if required, and ability to read source code to understand data flow and origin
7. Design effective data storage for the task at hand and know how to optimize query performance along the way
8. Follow an agile methodology of development and delivery
9. Strictly adhere to coding standards and internal practices; must be able to conduct review code
10. Mentor and possibly lead junior developers
11. Contribute towards innovation
12. Performance optimization of apps
13. Explain technologies and solutions to technical and non-technical stakeholders
14. Diagnose bugs and other issues in products
15. Continuously discover, evaluate, and implement new technologies to maximize development efficiency

Must have / Good to have:

1. 5-7years' experience with C++ development and relevant 3+yrs in modern version 11/14/17 would be a plus. 
2. Design and implementation of high-availability, and performance applications on Linux environment
3. Advanced knowledge of C/C++, Object Oriented Design, STL
4. Good with multithreading and data structures
5. Develop back-end components to improve responsiveness and overall performance
6. Familiarity with database design, integration with applications and python packaging.
7. Familiarity with front-end technologies (like JavaScript and HTML5), REST API, security considerations
8. Familiarity with functional testing and deployment automation frameworks
9. Experience in development for 3-4 production ready application using C++ as programming language
10. Experience in writing unit test cases including positive and negative test cases
11. Experience of CI/CD pipeline code deployment (Git, SVN, Jenkins or Teamcity)
12. Experience with Agile and DevOps methodology
13. Very good problem-solving skills
14. Experience with Web technologies is a plus. 

Read less

• Design, implement, and test production- grade core robotic software components possibly  including perception systems, motion planning systems, or command and control systems. • Design, implement, and test software integration components with other robotic platforms and  warehouse management systems 
• Design, implement, and test customer- specific software components 
• Develop testing frameworks and support testing for core software components • Develop logging and data analytics systems for deployments 
• Follow production- level code design and development processes including detailed  documentation, code reviews, and structured release processes

You would be part of:

1. Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
2. Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
3. Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
4. Writing Applications and Drivers from the scratch for (embedded)linux based systems.
5. Scripting and automations around work flows of UAS usage.
6. Working with existing sophisticated software stacks of subcomponents of UASs.
7. Working closely with electronics, design and systems teams for architecture development and deployment.
8. Working closely with Flight Controller engineers to do collaborative development of UAVs.

We expect you to be:

1. Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
2. Very good in analytical abilities to be able to do core research and development activities.
3. Able to write low level drivers (wrapper or core) from the scratch.
4. Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
5. Able to understand existing complex embedded software stack written in C/C++.
6. Solid in C.
7. Good in C++.
8. Comfortable with using hardware debuggers.
9. Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
10. Having Solid understanding of interrupt mechanisms.
11. Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
12. Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
13. Having Good understanding of the concept of bootloaders.
14. Able to multitask.
15. A self-motivated and motivating personality who can work well independently as well as part of a team
16. Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude

You are awesome if you are:

1. Experienced in Linux Device Driver development.
2. Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
3. Experienced in data filtering techniques (Example: Kalman filter)

Summary:

The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams. 

Responsibilities:

• Design and build embedded systems, including embedded system firmware
• Test and debug the systems
• Monitor and maintain the system after development
• Improve system efficiency and stability after development
• Collaborate with customers to create systems based on their needs

Requirements:

• Minimum of a bachelor's degree in computer science or engineering
• Professional experience in embedded systems
• Significant programming experience in C or C++
• Experience in trouble-shooting embedded systems and microcontroller peripherals
• Experience in working in real-time operating systems
• Experience in interfaces, IP protocols, and hardware subsystems
• Proficiency in working with common embedded systems communication protocols
• Strong interpersonal and writing skills
• Ability to work as part of a team
• Exceptional analytical and problem-solving skills
• Self-motivated and passionate about your work and embedded systems
• Always eager to learn and improve