11+ Network programming Jobs in Bangalore (Bengaluru) | Network programming Job openings in Bangalore (Bengaluru)

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

About us:

Arista Networks was founded to pioneer and deliver software driven cloud networking solutions for large datacenter storage and computing environments. Arista's award-winning platforms, ranging in Ethernet speeds from 10 to 400 gigabits per second, redefine scalability, agility and resilience. Arista has shipped more than 20 million cloud networking ports worldwide with CloudVision and EOS, an advanced network operating system. Committed to open standards, Arista is a founding member of the 25/50GbE consortium. Arista Networks products are available worldwide directly and through partners.

About the job

Arista Networks is looking for world-class software engineers to join our Extensible Operating System (EOS) software development team.As a core member of the EOS team, you will be part of a fast-paced,high caliber team-building features to run the world's largest data center networks.Your software will be a key component of Arista's EOS, Arista's unique, Linux-based network operating system that runs on all of Arista's data center networking products.

The EOS team is responsible for all aspects of the development and delivery of software meant to run on the various Arista switches.You will work with your fellow engineers and members of the marketing team to gather and understand the functional and technical requirements for upcoming projects.You will help write functional specifications, design specifications, test plans, and the code to bring all of these to life.You will also work with customers to triage and fix problems in their networks. Internally, you will develop automated tests for your software, monitor the execution of those tests, and triage and fix problems found by your tests.At Arista, you will own your projects from definition to deployment, and you will be responsible for the quality of everything you deliver.

This role demands strong and broad software engineering fundamentals, and a good understanding of networking including capabilities like L2, L3, and fundamentals of commercial switching HW.Your role will not be limited to a single aspect of EOS at Arista, but cover all aspects of EOS.

Responsibilities:

• Write functional specifications and design specifications for features related to forwarding traffic on the internet and cloud data centers.
• Independently implement solutions to small-sized problems in our EOS software, using the C, C++, and python programming languages.
• Write test plan specifications for small-sized features in EOS, and implement automated test programs to execute the cases described in the test plan.
• Debug problems found by our automated test programs and fix the problems.
• Work on a team implementing, testing, and debugging solutions to larger routing protocol problems.
• Work with Customer Support Engineers to analyze problems in customer networks and provide fixes for those problems when needed in the form of new software releases or software patches.
• Work with the System Test Engineers to analyze problems found in their tests and provide fixes for those problems.
• Mentor new and junior engineers to bring them up to speed in Arista’s software development environment.
• Review and contribute to the specifications and implementations written by other team members.
• Help to create a schedule for the implementation and debugging tasks, update that schedule weekly, and report it to the project lead.

Qualifications:

• BS Computer Science/Electrical Engineering/Computer Engineering 3-10 years experience, or MS Computer Science/Electrical Engineering/Computer Engineering + 5 years experience, Ph.D. in Computer Science/Electrical Engineering/Computer Engineering, or equivalent work experience.
• Knowledge of C, C++, and/or python.
• Knowledge of UNIX or Linux.
• Understanding of L2/L3 networking including at least one of the following areas is desirable:

1. IP routing protocols, such as RIP, OSPF, BGP, IS-IS, or PIM.
2. Layer 2 features such as 802.1d bridging, the 802.1d Spanning Tree Protocol, the 802.1ax Link Aggregation Control Protocol, the 802.1AB Link Layer Discovery Protocol, or RFC 1812 IP routing.

• Ability to utilize, test, and debug packet forwarding engine and a hardware component’s vendor provided software libraries in your solutions.
• Infrastructure functions related to distributed systems such as messaging, signalling, databases, and command line interface techniques.
• Hands on experience in the design and development of ethernet bridging or routing related software or distributed systems software is desirable.
• Hands on experience with enterprise or service provider class Ethernet switch/router system software development, or significant PhD level research in the area of network routing and packet forwarding.
• Applied understanding of software engineering principles.
• Strong problem solving and software troubleshooting skills.
• Ability to design a solution to a small-sized problem, and implement that solution without outside help.Able to work on a small team solving a medium-sized problem with limited oversight.

Resources:

• Arista's Approach to Software with Ken Duda (CTO): https://youtu.be/TU8yNh5JCyw
• Additional information and resources can be found at https://www.arista.com/en/

• Experience  4 - 8 years
• Key Skills for Software Developer C++, Linux :
• - Looking only for candidates who can join immediately or max 10 day
• - should be able to work independently with no handholding
• - the ability to work with C/C++ code on Windows/Linux platforms
• - Database knowledge of MSSQL, Oracle, MySQL/MariaDB, ideally other ones too: Saphana, Teradata, Postgres.
• - Ability to work on their own fixing defects
• - should be able to understand secure coding practices
• - should have the Ability to work independently and with the team across different time zones

About Apexon:

Apexon is a digital-first technology services firm specializing in accelerating business transformation and delivering human-centric digital experiences. For over 17 years, Apexon has been meeting customers wherever they are in the digital lifecycle and helping them outperform their competition through speed and innovation. Our reputation is built on a comprehensive suite of engineering services, a dedication to solving our clients’ toughest technology problems, and a commitment to continuous improvement. We focus on three broad areas of digital services: User Experience (UI/UX, Commerce); Engineering (QE/Automation, Cloud, Product/Platform); and Data (Foundation, Analytics, and AI/ML), and have deep expertise in BFSI, healthcare, and life sciences.

Apexon is backed by Goldman Sachs Asset Management and Everstone Capital.

To know more about us please visit:  https://www.apexon.com/" target="_blank">https://www.apexon.com/

Desired Candidate profile:

• 5+ years of Embedded/Linux SW Development relevant Experience in Embedded C++. 
• Expert knowledge in writing software for embedded Systems (Embedded C++ language).
• Experience on OTA would be an added advantage
• Work experience in software development on bare metal, RTOS or Internal Linux. 
• Work experience in developing firmware for 8/16/32 bit microcontrollers (ARM, RISC etc)
• Good understanding w.r.t usage of 1. RTOS like MQX. 
• Bootloader and software update concepts. 
• Communication protocols like TCP/IP,MQTT. 
• Socket programming in Linux environment. 
• Good knowledge on protocols like (RS485, SPI, I2C, ADCs, CAN, LIN) 
• Knowledge of Blue-tooth communication protocols for BLE 4.2/5.1. 
• Proficient in the use of embedded SW Development tool chain (Flash/ debug tool chain, IDE). 
• Version Control Systems –GIT 
• Should have detailed knowledge on microcontrollers/microprocessors 
• Experience in scripting languages like Shell / CAPL / Make/Python etc. 
• Experience in using tools like Logiscope / Function Generator / Oscilloscope, etc. 
• Good knowledge in reading schematics and datasheets. 
• Excellent analytical skills and problem-solving skills. 
• Strong communication and interpersonal skills. 
• Must be a self-starter. 
• Ability to work as part of a dedicated project team and independently 

Please find the Job Description for C/C++.

Mandatory Skills

-Must have experience and Good understanding about pointers & memory in C/C++

-Must have experience in Unix/Linux IPC (semaphore, shared memory, socket, multi thread)

-Must have Debug skills : gdb, coredump analysis, network packet analysis

-Must have experience in Source code syntax parser (Preferably lex, yacc, bison, etc.)

-Must have worked on build tools : Makefiles, make, etc.

-Database : Preferably Oracle Good at SQL and stored procedures

Optional Skills

-Telegram development using C/C++

-Finance/Industry domain knowledge

-Japanese speaking skills

• Responsibilities:Troubleshoot and report RCA, propose solutions(how to fix)
• Debug identified problems and provide fixes swiftly
• Ability to write clear and concise documentation
• To understand and maintain legacy codebase
• Individual contributor, but also works closely with junior developers
• Review source code developed by peers
• Proactive to suggest and implement improvements on current products
• Design and develop new features based on requirement document

Location-Bangalore

Please share your updated resume to proceed further.

Thanks & Regards

Shruti(Assistant Executive-HR)

Nichi-In Software Solution Pvt Ltd

URL:- www.nichi.com

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SOFTWARE ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with Hardware, Systems and other multi-functional teams and deliver high quality software at fundamental layer of operating system including frameworks, daemons, drivers.
• You need to keep security and performance in mind, enable key features to improve privacy and prevent fraudulence
• The position requires high level thinking to design code solutions along with low level programming and excellent communications and leadership skills, with the ability to work in a fast paced environment.

RESPONSIBILITIES:

• Rich experience of programming on cryptography
• Profound understanding on Operating System concept
• Highly self-motivated and capable of work and finish tasks alone
• Comfortable and adaptable in a fast-paced environment
• Fluent in both oral and written English
• Strong communication and interpersonal skills; excellent judgment

EXPERIENCE:

• We as a team are looking for freshers or young professionals with 0-4 years of experience having a a self-directed, proactive approach to tackling problems and working through impediment and an ability to generate trust and build alliances with co-workers.

Job Description:

Looking for engineers with one of the below requirements:

• 2-5 years of embedded development experience in a Linux environment with C programming
• With Option1:
• EDK2 experience
• SCT experience
• knowledge of TPMs
• With Option2:
• worked on bootloaders or uboot