Firmware Engineer

Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination

Criteria:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

Description

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycle.

• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.

• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.

• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.

• Completed at least two project from high-level design to final product level deployment.

• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.

• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.

• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.

• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.

• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.

• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.

• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.

• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Education Requirements: 

B. Tech / M. Tech (ECE/ CSE/ IT)

Experience - 10 to 12 Years

Job Details

- Job Title: Sr. System Test Engineer

- Industry: engineering

- Domain - Information technology (IT)

- Experience Required: 6-10 years

- Employment Type: Full Time

- Job Location: Pune

- CTC Range: Best in Industry

Job Description

• Designation- Sr. System Test Engineer
• Qualifications: B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical
• Experience: 6-10 years.
• Location: Pune.
• Work Mode: Hybrid (1-day WFH, 4-days from Office)

A. Skills & Technologies:

Mandatory:

• PLC Programming in Ladder/Structured Text/Function blocks.
• Configuring and commissioning Servo Drives, VFDs & Inverters.
• Experienced in Motion Control Programming in PLC for servo drives.
• Experience in Robotic (Drive Groups, Multi-Axes) programming in PLC.
• Design and Commissioning experience for Machine automation and turnkey projects,
• (including but not limited to Factory Acceptance Test (FAT) / Site Acceptance Test (SAT)).
• Hands On with one or more Fieldbus technologies (like Ethernet/IP, PROFINET,
• EtherCAT, Ethernet PowerLINK, CAN, PROFIBUS, ControlNET, DeviceNET).
• Configuring of PLC Backplane IOs and Remote IOs on Fieldbus.

Desirable:

• Electrical Wiring Design for Control panels.
• Experience in Manual testing.

B. Behaviors:

• Good team player
• Open to learn new technologies.
• Agile in nature
• Self-motivated and proactive

C. Role and Responsibilities:

• Design and execute tests on complete automation system.
• Test motion, robotics related Function blocks in PLC code, before release to market.
• Analyze requirements, design PLC programs, write and execute system tests.
• Follow required test processes as defined by Lead/Manager.

Must-Haves

6years of Hands‑on experience in PLC programming.

6years of Hands‑on experience in configuring and commissioning Servo Drives and VFDs.

6years of Hands‑on experience in motion control programming in PLC for servo drives.

Good communication skills.

A strong “can‑do” attitude.

Willingness to learn.

Ability to work effectively in a team.

Bachelor's degree - B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical

Minimum of 2years of stability with each company

*******

Notice Period: Immediate to 30days.

Responsibilities:

You will get a chance to create products from scratch. While you will get the advantage of the scale of the organization, you are expected to come up with creative solutions to challenging problems.

On a typical day, you'd work with highly skilled engineers to solve complex problems. This is an early-stage initiative. Your ability to translate business requirements, and develop and demonstrate quick prototypes or concepts with other technology teams will be of great value.

You will learn and work on a variety of languages such as C/C++, python, and Linux as well as work on BLE, MEMS, biometric sensors, and the latest wireless technologies.

Requirements:

6+ years of Embedded firmware development experience in C/C++

BLE/GPS/GSM/RTOS stack expertise

Hands-on experience with Lab equipment (VNA/RSA/MSO etc).

Testing environment setup using automation scripts and networking equipment, practices for the full software development life cycle, including coding standards, code reviews, source control management, continuous

Familiar with Wireless/IoT network protocols and standards.

Experience with microcontrollers, sensors, and serial communication.

Preferred experience with wearOS/TizenSuperior presentation and communication skills, both written and verbal

Bachelor/Masters's degree in electrical/electronic/communications engineering, information technology, physics, or a related field from

Tier 1 Tier 2 Engineering colleges only (IITs/NITs/IIITs/BITS etc. )

Result-oriented and ready to take ownership. Exhibit strong team

* Experience in C/C++ and have strong experience embedded application development and integration in Linux

* Good in creating unit tests, performing code reviews, optimizing performance and ensuring standards for maintainability  

* Debugging, profiling, and performance optimization skills

Position Overview:

This position is part of highly skilled fimrware team that do software board bring up of bare silicon for next generation products. In order to write system software for embedded electronic products, this position requires academic background in electronics engineering to understand hardware concepts such as digital logic, schematics, and microprocessor communications to develop effective embedded software.

Candidate should have complete knowledge of Software development cycle from architecture definition to the implementation.

Responsibilities:

• Must wear multiple hats from analyzing field and factory reported issues to software integration.
• Be a liason for troubleshooting and debugging complex systems and identifying the root cause.
• Develop detailed design documents and customer facing application notes for the system and IOT features for Mobile routers.
• Act as a product lead and be part of bigger team in software bring up.   
• Ability to work on Low level software such as bootloaders and understanding of low level functional blocks is a must.
• Work on Linux kernel and configuration.
• Write or port device drivers for Ethernet, USB, GPIO, LED, Bluetooth, Accelormeter, LCD and touch screen.
• Debug stability issues in data routing between WAN and LAN interfaces.
• Work with Software QA with test plan and execution.
• Work with Hardware team to identify and root cause stability problems.

Experience/Requirements:  

• Demonstrable knowledge of C, C++, Assembly programming skills
• Overall 10+ years of experience in embedded environment preferabily Linux.
• Board bring up proficiency with bootloaders and other low level software, must be very good with debugging techniques.
• Experience in TCP/IP networking is must for trouble shooting throughput and other traffic issues.
• Driver experience with I2C, SPI, UART, LCD, Ethernet, PCIe is a plus.
• Experience with low level debugging using JTAG.
• Experience with Makefiles, and build environments such as PTXDIST, Yocto and Buildroot.    
• Experience with version control such as git and svn.
• Good communication skills and team player.
• Ability to work independently and autonomously to meet deadlines, in a fast-changing environment.

Education:

Responsibilities and Duties
The team leader will be leading a team of Hardware engineers, firmware and testing engineers. Being a team leader, you will primarily be responsible for fast and accurate delivery from the team which might even include handholding of team members whenever needed. Embedded team would be responsible for the following:
Hardware Design including

• Circuit design as per design requirements
• Schematic capture in the tool
• CAD layout
• QA/QC/functional testing
• PCB assembling and rework
• Lab inventory management
• Component procurement.

Firmware Design Including

• Firmware Design and architect
• Software Development
• Firmware Testing
• Code management over svn

Other Responsibilities

• The team leader would also be responsible for architecting the system, creating detailed design documents as per requirement and maintaining quality control of all the deliverables.
• The team leader would also be required to create a detailed test plan and list of test cases to be executed and if needed, create proper environment for the same.
• Ownership of the ‘ground up’ design and architecture of embedded software for real time applications.
• Decomposition of designs in to structured modules/functions ready for implementationby yourself and the team.
• Hands on development in C of new ARM based embedded software for a range of products currently under development
• Ensure quality of software using appropriate methods(Code Review, Static Analysis, Unit Test etc.) and application of suitable Coding Standards
• Maintain, update and enhance existing embedded software written in C
• Documentation of software products, development and execution of test plans
• Work closely with other members of the engineering team to assist with the correct choice of processors and supporting hardware

Required Experience, Skills and Qualifications

• Experience of 8+ years in field of embedded systems designing and developement.
• Familiar with usage of various LAB instruments.
• Strong fundamentals of electronics (Digital and analog) are must.
• Well versed with circuit designing and HW debugging
• Analog and Digital Circuit designing: familiarity with micro-controllers, memories, communication interfaces, op-amps, comparators, relays, inductors and capacitors, Handling EMI and Noise issues associated with circuits.
• Understanding of BLE protocols will be required.
• Understanding of scientific methodologies of experimentation, data-gathering and interpretation and hypothesis.
• Understanding of basic architecture, debugging of sensors.
• Experienced in embedded-C coding, memory allocations.
• Experience with any RTOS designing preferably with FreeRTOS at least with Semaphores, SW Timers, synchronisation and event handlings, task handling and prioritization.
• Understanding of micro-controller architecture, programming and debugging methodologies, interrupt-handling.
• Experience with any of the IDEs and debuggers for ARM architecture.
• Basic understanding of assembly programing of ARM architecture
• Understanding of basic peripherals like UART, CAN, I2C, Timers, Counters, PWMs, ADCs, DAC.
• Experience/knowledge in IoT devices (sensor, gateway, cloud) handling.
• Familiarity with CAD tools for schematics and layout generation.
• Experience on MS-Office.
• Familiarity in understanding and creating various test plans and documents.

General Skills Needed/ Requirements:

• Strong knowledge of components and should be able to suggest the team with right componenet
• Candidate must have a knack to use his/her technical knowledge to give it back to society.
• Candidates passionate to bring a change in society will be preferred with no compromise on pay check.
• Candidates must be open to work with communities to get feedback on product features so that products are best fit for social upliftment.
• Candidates must be open to travel to needy communities and should not hesitate to get his/her hands dirty to bring a change to the communities.
• Candidates must find associated with the cause and mission of the company.
• Open to work in open startup culture and give his/her 100%.
• Analytical reasoning and fact-based brainstorming capabilities will be highly preferred.
• Ready to relocate to Gurugram.
• Occasional field visits.

Develop, design, and implement embedded applications.

· Prepares appropriate documentation as required by internal product development processes

· Conducts and participates in design, code and test reviews and inspections, as well as the feasibility, efficacy and compliance to functional and regulatory standards.

· Works closely with the software team, the software verification team, the functional manager and the project manager.

· Collaborates with distributed, cross-functional teams to ensure products meet quality, performance, scalability, reliability and schedule goals.

· Investigates software, hardware, and system problems using a variety of techniques and provides innovative solutions.

· Conduct and participate in reviews and inspections for all elements in the firmware lifecycle to ensure that our code quality and customer satisfaction goals are achieved

· Integrate and validate new product designs

· Provide post-production support

Skill Sets:

• B.Tech. / M.Tech. (any stream)

· Good knowledge in firmware development field with more than 3 years of experience

· Basic knowledge of software life cycle, algorithm and data structure.

· Excellent knowledge of OS, coding techniques, IP protocols, interfaces and hardware subsystems

· Adequate knowledge of reading schematics and data sheets for components.

· Ability to understand the electrical schematics and work closely with electrical team.

· Experience with Real Time Operating Systems and Embedded Linux.

· Mode of network connectivity - good idea about GSM/GPRS, Wifi, Ethernet mode of connections. TCP, MQTT, HTTP mode of connection will be a big plus

· Protocols Like UART, SPI, I2C, CAN, MODBUS, TCP/IP, USB, Bluetooth.

· Experience in modules like Wi-Fi, BLE, Lora WAN, ZIGBEE, RF etc.

· Should have experience in working with TFT and LED displays.

· Extensive experience in micro-controller/microprocessor (like ARM Cortex M, ESP32, STM Chips, NXP, BeagleBone , ESP chips, BeagleBone black, STM Chips, Atmega chips etc.)

· Familiarity with software configuration management tools, defect tracking tools, and peer review (GIT, SVN)

· History of driving project execution and timely delivery while ensuring a quality focus.

· Experience writing / interfacing with device drivers.

· Experience in Agile development processes and philosophies.

· Strong documentation and writing skills

Mandatory Skills:

· Basics of embedded system development

· Embedded C/C++

· Scripting Lang - Python

· Basics of wireless communication

· RTOS

· Strong Problem-Solving Skills

· Analytical Skills (Good Aptitude)

· Communication Skills