11+ Green Hills Jobs in India
Apply to 11+ Green Hills Jobs on CutShort.io. Find your next job, effortlessly. Browse Green Hills Jobs and apply today!
Basic Qualification: BE / Btech Computer Science
Desirable Skills:
1.Software development using Embedded C, C++ with programming standards (MISRA)
2.Knowledge of bus systems, which are used in the automotive industry, like CAN, LIN, I2C, SPI, etc)
3.Software development processes –A-SPICE V-cycle
4.Experience with development of control units for the automotive industry, especially experience with the development based on AUTOSTAR basic software.
5. Experience in the automotive industry according to common development and parameterization tools (i.e. Vector CANoe).
6.Knowledge of standards for safety-critical software (ISO 26262) is a plus.
About Us
We are a fast-growing deep-tech startup building next-generation embedded products from the ground up. We move fast, prototype aggressively, and take ideas from whiteboard to production.
If you enjoy solving real-world hardware challenges, writing tight firmware, bringing up boards, and seeing your design go into mass production, you’ll love it here.
Key Responsibilities
- Design and develop embedded hardware systems based on microcontrollers and SoCs
- Develop, test, and optimize embedded firmware in C/C++
- Perform schematic design, component selection, PCB review, and board bring-up
- Develop low-level drivers for peripherals (UART, SPI, I2C, CAN, USB, Ethernet, etc.)
- Debug hardware/firmware issues using oscilloscopes, logic analyzers, and debuggers
- Collaborate with cross-functional teams (mechanical, testing, manufacturing)
- Support product validation, compliance testing, and production release
- Prepare technical documentation and design reports
- Collaborate directly with founders and product teams
- Take products from prototype to manufacturing
You won’t just “contribute.” You’ll own modules and ship products.
Required Skills & Qualifications
- 4–8 years of hands-on experience in embedded systems
- Strong embedded C/C++ skills
- Experience with microprocessors/microcontrollers, SOCs’
- Experience in power supply designs, analog and digital interfaces.
- Experience in schematic design & PCB review
- Strong debugging skills using oscilloscopes, logic analyzers, and JTAG
- Deep understanding of communication protocols (SPI, I2C, UART, CAN, Bluetooth, WiFi, etc.)
You should be comfortable moving between hardware and firmware without hesitation.
Good to Have (But Not Mandatory)
- FPGA development (Verilog/VHDL)
- Experience with Xilinx/Intel FPGA tools
- High-speed digital design exposure
- Embedded Linux experience
- EMI/EMC awareness
Educational Qualification
- B.E./B.Tech/M.E./M.Tech in Electronics, Electrical, and Embedded Systems.
Who Will Thrive Here
- Builders who like solving messy real-world problems
- Engineers who take ownership instead of waiting for instructions
- People who enjoy fast iterations and tight deadlines
- Those who prefer impact over hierarchy
Why Join Us
- Work on cutting-edge embedded products
- High ownership & decision-making power
- Fast learning curve
- Direct impact on product architecture
CInternship Opportunity – Embedded Systems & IoT
Join our hands-on internship program designed for engineering students passionate about core tech. You'll work on real-time projects involving microcontrollers, sensors, RTOS, circuit design, and IoT protocols.
Gain exposure to AI-integrated embedded applications and build a strong project portfolio with mentorship and placement support.
Location: Bangalore (Hybrid/On-site)
Duration: 2–3 months
Eligibility: Final-year students and pre final year (ECE/EEE/CSE/Mechatronics)
#EmbeddedSystems #IoTInternship #EngineeringInternship #CoreTechCareers #Microcontrollers #RTOS #PCBDesign #IoTProjects #KnowxInnovations #AIoT #TechInternship #SkillDevelopment #HandsOnLearning #BangaloreInternship #StudentInternship
Job Description:
We are looking for an experienced Salesforce Developer to join our team. The ideal candidate should have a minimum of 6 years of experience in Salesforce development, with strong expertise in Salesforce Configuration, Customization, and CPQ tools (Conga CPQ and Salesforce CPQ).
Key Responsibilities:
- Design, develop, and implement solutions within Salesforce, ensuring high-quality and scalable configurations and customizations.
- Work with Conga CPQ / Salesforce CPQ to design and optimize pricing, quoting, and billing solutions.
- Customize Salesforce using Apex, Lightning Web Components (LWC), and Batches to meet business requirements.
- Implement security best practices with Apex Security and ensure adherence to coding standards.
- Collaborate with cross-functional teams to define system requirements and ensure seamless integrations.
- Utilize DevOps tools such as GitHub for version control and CI/CD pipeline management.
Required Skills & Qualifications:
- Minimum of 6 years of experience as a Salesforce Developer.
- Hands-on experience with Salesforce CPQ (Conga CPQ + Salesforce CPQ).
- Strong knowledge of Salesforce Configuration and Customization (Apex, LWC, Batches).
- Expertise in Apex Security to maintain secure and efficient code.
- Familiarity with DevOps tools like GitHub, CI/CD processes, and version control.
- Excellent problem-solving skills and attention to detail.
- Strong communication and collaboration skills in a team environment.
If you are passionate about Salesforce development and enjoy working on scalable and innovative solutions, we would love to hear from you!
Requirements:
- Very good programming knowledge in C/C++
- Experience in Multi-threaded software development
- Understanding of operating systems concepts, system performance, and optimization
- Familiar with working in an Embedded Linux development environment.
- Excellent problem-solving/debugging skills, design, development, troubleshooting, and debugging
- Knowledge of embedded tools like emulators, linkers, makefiles, etc
- Experience in voice applications development, preferably on client/server platforms
- Knowledge of RTOS programming will be added advantage.
- Understanding of different processors. microcontrollers architectures.
- Familiarity with development tools such as GCC, GDB, Eclipse, GNU Make, etc
C++CSummary:
Hyperspec is building a real time local map for self-driving cars and using cross view localization to enable ubiquitous autonomy. Hyperspec is a VC funded startup.
The principal embedded systems engineer will have deep expertise in embedded systems design, development and worked for years on embedded systems teams. This person is a leader and mentor to junior engineers and shares knowledge about the design and development of embedded systems.
Responsibilities:
- Serves as an expert in all aspects of embedded projects and embedded systems—including designing, developing, testing, and perfecting designs
- Responsible for updating and working with executive leadership on the development of embedded systems and status of projects
- Provides guidance and mentoring to other members of the team
Requirements:
- Minimum of bachelors' degree in computer science or engineering
- At least ten years of engineering experience with expertise in software engineering, data structures, and programming techniques
- Deep expertise in C/C++ programming
- Experience with FPGAs, PCB, Xilinx, Altera, or similar SoCs.
- Experience with ISPs, Cameras, Switches a plus.
- Experience in working with real-time operating systems, communications protocols and firmware design.
- Experience in interfaces, IP protocols, and hardware subsystems.
- Experience in working as part of a team and leading teams.
CHands-on experience in Autosar methodologies and workflows.
• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.
• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.
• Automotive Product Development Process knowledge (ASpice, ISO26262)
• Experience in one or more of Autosar BSW Modules stacks.
• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.
• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.
• Working knowledge on AUTOSAR ECU software architecture
• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools
• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules
• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes
• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)
Understand the flow of the AUTOSAR software from application till the underlying driver.
CEmbedded System Engineer
Working on Embedded programming on the microcontroller, Linux/Android OS development
Working on component sourcing, PCB Design and fabrication
Working on assembly and testing
Working on field deployment and Testing
Skills:
Embedded Systems
C Programming
Must be exceptionally good in Embedded Systems C programming, testing/ debugging and in advanced C concepts
Capable of working in Embedded Systems based projects based on 8 and 32 bit microcontrollers (STM32)
Experience with communication protocols and peripherals like UART, SPI, RTC, Ethernet
Hands on experience in IDE like Keil, AVR Studio, MPLAB
Strong documentation and writing skills
Work Experience
1-3 years preferable, fresher with good embedded system knowledge can also apply
Experience - 6 to 10yrs
Location - Bangalore , Pune and Mumbai
Job description -
- Bachelors in Electronics & Communication or equivalent
- 6-10 yrs experience in embedded software development
- Hands-on embedded C skills (mandatory)
- Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
- Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
- Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
- Experience with any networking & connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP
- Exposure to any IoT frameworks (desirable not mandatory) – IoTivity, AWS IoT, Azure IoT
- Experience with any device driver development, driver optimisation (desirable not mandatory)
- Good ability to read data sheets & technical manuals
PythonC++Flux Auto builds autonomous vehicle technology for commercial and industrial applications.
Flux Auto was founded in 2017 with the goal of democratizing autonomous vehicle technology and bringing its benefits to vehicles - new and old - around the world. We develop the various hardware and software technologies to make vehicles move and operate autonomously. Everyday our engineers are working to solve new and unique challenges for our clients in India, and North America.
We are a multidisciplinary team solving some of the most challenging problems in
autonomous technology and robotics. Join us in our journey to democratize autonomous mobility!
Experience required: 1 year of internship and projects done in similar domain.
About the role:
We are looking for a candidate with conceptual understanding of classical control systems and logic building. The candidate should be able to understand the existing control stack, tune the hyper-parameters and make necessary changes as per the need. The position requires you to have a basic understanding of automotive systems which will be an added advantage and also help in clear understanding of the application.
Team works towards development of algorithms and model based design for different features to achieve autonomy level 3 and level 4. The algorithms are continuously tested on simulation and vehicle system for verification and validation.
Requirements:
- Sound knowledge in controller design and analysis.
- Good understanding in optimisation based control algorithms.
- Experience with implementing PID controller for various unstable system.
- Experience with vehicle modelling and analysis.
- Good understanding of implementation/debugging/testing model and control algorithms.
- Candidate should have experience in programming concepts like OOPS in C++ and Python with robust and efficient coding.
- Experience in Matlab/Simulink, Stateflow.
- Good understanding in code generation, implementation and testing for real time intergration embedded system.
Responsibilities:
- Algorithm development for different control features.
- Testing of algorithm architecture along with tuning and validation.
- Working with simulation team to integrate and test models and algorithms into simulation environment for rapid development and validation.
- Tuning and validation of plant models to emulate real physical systems’ behaviour
- Co-ordination with other departments to maintain consistency and compatibility in department stack.
Good to Have:
- ROS and ROS2 experience
- Vehicle dynamics modelling and simulation.
- Experience with version control using Git.
Benefits:
- Health Insurance
- Employee Stock Options
- Work from Home
- Flexible work hours
- Monthly Team outings and events
- Budget for up-skilling
- Flexible vacation
Equal Opportunity Employer:
Flux Auto's employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, age, gender identity, genetic factors, military/veteran status or other characteristics protected by law.
Vaccination Requirements:
Flux Auto is implementing new requirements for employees to be fully vaccinated from COVID-19.
Apply Now!
Follow Cutshort