SW Development Manager - Automotive

Position: Application Software Development MBD Engineer – Motor Control Unit

Location: Bangalore

Employment Type: Contract

Experience: 4–6 Years

Industry Preference: Automotive

Reporting To: Manager – MCU Software Development

Educational Qualification: B.Tech / M.Tech in Electrical Engineering or related discipline

About the Role  

We are looking for a skilled and motivated Application Software Development MBD Engineer with strong expertise in Motor Control Unit (MCU) software development and Model-Based Design (MBD). The candidate will be responsible for developing, simulating, and implementing motor control algorithms for automotive applications using MATLAB/Simulink-based development methodologies.

  Key Responsibilities  

• Develop application software using MATLAB Model-Based Development tools including MATLAB, Simulink, Stateflow, and Embedded Coder
• Design, develop, and validate motor control algorithms for:  Induction Motors,  Permanent Magnet Motors (SPM/IPM)
• Implement motor control techniques including:  Field Oriented Control (FOC),  Sensorless Control Strategies,  V/f Control Schemes
• Implement and optimize PWM techniques such as SPWM and SVPWM
• Develop and integrate application software for Micro Control Units using:  Infineon TriCore  processors,  Texas Instruments DSPs
• Work with development environments and tools including Eclipse-based tools, TASKING, and Code Composer Studio
• Support software debugging, simulation, testing, and validation activities for automotive embedded systems

Required Skills  

• Strong experience in MATLAB, Simulink, Stateflow, and Embedded Coder / Code Generation tools
• Experience in motor control and automotive embedded systems
• Good understanding of electric motor control systems and power electronics
• Experience with embedded C programming and real-time systems
• Hands-on experience with development tools such as Eclipse-based tools, TASKING, and Code Composer Studio
• Good debugging and problem-solving skills
• Understanding of automotive software development processes is an added advantage.

Role: Powertrain Diagnostics Engineer 

Location: Bengaluru 

Experience: 3-5 years 

About company: 

Requisimus is an IT consulting and service organization headquartered in Germany. With over 25 years of expertise and global presence, we are committed to customer excellence and focused in addressing niche areas of product engineering, process consulting and software development in automotive, railways, production automation, data management and business IT domains. Requisimus, India incubated since 2023, is focused to provided consulting and services for embedded product development and software solutions. 

Job Summary: 

The Powertrain Diagnostic Trouble Codes (DTC) Specialist having responsibilities for developing and managing the diagnostic trouble codes for powertrain systems. This role involves collaboration with cross-functional teams to ensure on-time delivery of diagnostic solutions that meet quality and regulatory standards. 

Key Responsibilities: 

• DTC Development and Management: 
• Experience in Diagnostics and Fault Management 
• Developing powertrain diagnostic strategies and DTCs, understanding of DTC Structure. 
• Ensure that diagnostic systems meet OBD I and II (On-Board Diagnostics) standards. 
• Maintain and update the DTC related Documents as new systems are developed and existing 
• systems are modified. 
• Knowledge of ISO14229. 
• Experienced programming with C/C++ 

Collaboration and Communication with Testing and Validation Team: 

• Working closely with the validation and vehicle testing teams for resolving reported issues to improve overall vehicle performance. 
• Based on testing & validate feedback: Analyzing, Diagnosing, Debugging and troubleshooting reported software issues, providing effective solutions. 
• Coordinate with software developers to ensure seamless operation and accurate reporting of DTCs. 
• Perform root cause analysis for diagnostic emissions and drivability cases. 

Documentation and Reporting: 

• Prepare comprehensive documentation for diagnostic algorithms and code functionalities. 
• Report on the performance and accuracy of diagnostic systems 

Support and Training: 

• Provide technical support to internal teams and external customers regarding diagnostic 
• systems. 
• Develop training materials and conduct training sessions 

Senior Embedded Software Engineer – U-boot, Linux Kernel & Device Drivers

Company Name: SAS One Pvt Ltd (www.sasone.in)

Location: Bengaluru, India

Experience: 6+ years

Job Summary:

We are looking for a highly skilled Senior Embedded Software Engineer experienced in Embedded C development, Linux Kernel programming, and Device Driver design. The ideal candidate will contribute to low-level software development for embedded systems, working closely with hardware teams to design, implement, and optimize drivers and kernel modules for next-generation platforms.

Key Responsibilities:

• Design, develop, and debug embedded software in C for SoM(System On Modules).
• Develop and maintain board support packages (BSPs), bootloaders, and low-level firmware.
• Work on real-time performance optimization, memory management, and inter-process communication.
• Develop and maintain Linux kernel modules and device drivers for various peripherals (I2C, SPI, UART, GPIO, USB, PCIe, HDMI, etc.).
• Collaborate with hardware engineers for bring-up, debugging, and validation of new boards.

Required Skills & Experience:

• Bachelor’s or Master’s degree in Electronics, Computer Engineering, or related field.
• 6+ years of hands-on experience in embedded software development.
• Strong proficiency in Embedded C.
• Deep understanding of Linux Kernel internals, device driver architecture, and hardware software interaction.
• Familiarity with ARM architecture, SoC bring-up, and YOCTO environments is a plus.
• Strong debugging and analytical skills, with the ability to work independently in fast-paced environments.

Preferred / Good-to-Have Skills:

• Exposure to Yocto Project, U-Boot, and bootloader customization.
• Experience with embedded Linux distributions or open-source contributions.
• Understanding of hardware schematics and signal analysis (oscilloscope, logic analyzer).

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

    Requirement analysis

·         Acquisition support (Technical analysis)

·         Automotive ECU software development

·         Diagnostic (UDS) function development

·         Software testing

·         Technical collaboration with internal/external development parties

Hands-on experience in Autosar methodologies and workflows.

• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.

• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.

• Automotive Product Development Process knowledge (ASpice, ISO26262)

• Experience in one or more of Autosar BSW Modules stacks.

• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.

• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.

• Working knowledge on AUTOSAR ECU software architecture

• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools

• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules

• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes

• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)

Understand the flow of the AUTOSAR software from application till the underlying driver.

StartUp engaged in inventing and innovating Smart Energy Meters and related Technologies (OEM) requires Embedded Engineers. Following re-innovation principle and Technology First direction, we design Technologies to deliver our Vision of the highest Quality Products and Technologies. The candidate's responsibilities include IoT (COSEM/DLMS), technology integration. Required skills include Embedded C and C++ and knowledge of Electrical and Electronics.

Develop firmware, system software for medical devices\ Automotive ECUs\ IoT edge devices & gateways.  Implement the logic and protocols and communications on 32-bit microcontrollers, configure OS, timers, tasks, interrupts, and communicate with external modems, SoCs, trans-receivers to design, code, and test desired functionality as per customer requirements

Job Requirements :

• Hands-on experience in firmware development using C language
• Hands-on experience in writing low-level device drivers for microcontrollers
• Know of real-time Operating system concepts, tasks, and interrupts’ configuration
• Hands-on experience with in-circuit debuggers
• Knowhow of wired and wireless communication protocols 
• Basic understanding of HW circuits, power supply designs, sensors, and actuators’ interfaces
• Experience in implementing SW development quality processes like ISO 9001 or ASPICE
• Good written and oral communication skills

MINIMUM QUALIFICATIONS, Roles and responsibilties:

• BS/MS in Computer Engineering or related technology field
• 10+ Years of Experience in Software Development
• Experience in  writing code for embedded systems, Proficient in C/C++ coding and intel DPDK
• Understanding of network interface drivers
• Experience with VMware, AWS, MSAzure, Google Cloud Platform.
• Knowledge of micro services and containerization
• Experience in building Networking Security Products
• Knowledge of Networking, TCP/IP Protocol Suite
• Design, code embedded features/solutions for the ShieldX Product
• Design write, extend and troubleshoot datapath code for switching, routing, NAT, TCP and TLS
• Work closely with other development , Product and Test Teams

• BS/MS in Computer Engineering or related technology field
• Excellent communication and Team player skills
• Should be a self-starter and be able to adopt to dynamic fast-paced environment.
• Able to work 40 hours a week