Senior Embedded Engineer

Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination

Criteria:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

Description

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycle.

• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.

• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.

• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.

• Completed at least two project from high-level design to final product level deployment.

• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.

• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.

• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.

• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.

• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.

• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.

• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.

• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Education Requirements: 

B. Tech / M. Tech (ECE/ CSE/ IT)

Experience - 10 to 12 Years

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

Primary skills:

At least 3+ years of working experience on embedded firmware development

- Experience in multithreaded programming, network programming (wired and wireless protocols), real-time programming, cross-platform and cross-language development

- Hands-on experience on driver development for various sensors

- Working knowledge of communication protocols like UART, I2C, SPI, USB, Ethernet, etc

- Product development experience with range of microcontroller/microprocessor architectures, adoption of bare-metal, RTOS and Linux operating systems on new platforms

-Hands-on experience on software development in Bluetooth domain is added advantage

- Experience with hardware lab equipment such as digital scope, logic analyser and JTAG

- Understanding of embedded development constraints and system performance

- Experience with programming in C/C++ and Embedded C

What You'll Do

●       Develop embedded system architecture that is efficient and scalable

●       Develop multi-device system design, envision customer interaction, and corner cases to build issue-free design

●       Develop firmware code for Interrupt driven system which interacts with Android and cloud

●       Implement function safety, protection and security in the embedded system

●       Implement predictive hardware failure features

Who You Are?

●       Passionate individual who loves to work on embedded systems. a person who likes to drive things actively rather than waiting for tasks to get assigned.

●       Strong programming capabilities

●       Understanding of electronics and hardware

●       Clear thought process, believe in simplifying rather than complicating

●       Argue and fight over the opinions. Believe in delivering the best for the users

You Should Have

●       3+ year experience in embedded system design

●       Mastery in C/C++ for embedded systems. Strong fundamentals of Microcontrollers and their common peripherals.

●       Strong basics of C/C++, memory map, compiler functionality

●       Done multiple projects during graduation/post-graduation. Participated and performed in tech competitions. 

●       Experience working with actuators like motors (DC/brushless), LED/LCD and HMI interfaces, speakers, sensors etc

●       Experience working with motor control algorithms and PID controllers

• Proficiency with Linux OS and basic bash scripting

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

About Apexon:

Apexon is a digital-first technology services firm specializing in accelerating business transformation and delivering human-centric digital experiences. For over 17 years, Apexon has been meeting customers wherever they are in the digital lifecycle and helping them outperform their competition through speed and innovation. Our reputation is built on a comprehensive suite of engineering services, a dedication to solving our clients’ toughest technology problems, and a commitment to continuous improvement. We focus on three broad areas of digital services: User Experience (UI/UX, Commerce); Engineering (QE/Automation, Cloud, Product/Platform); and Data (Foundation, Analytics, and AI/ML), and have deep expertise in BFSI, healthcare, and life sciences.

Apexon is backed by Goldman Sachs Asset Management and Everstone Capital.

To know more about us please visit:  https://www.apexon.com/" target="_blank">https://www.apexon.com/

Desired Candidate profile:

• 5+ years of Embedded/Linux SW Development relevant Experience in Embedded C++. 
• Expert knowledge in writing software for embedded Systems (Embedded C++ language).
• Experience on OTA would be an added advantage
• Work experience in software development on bare metal, RTOS or Internal Linux. 
• Work experience in developing firmware for 8/16/32 bit microcontrollers (ARM, RISC etc)
• Good understanding w.r.t usage of 1. RTOS like MQX. 
• Bootloader and software update concepts. 
• Communication protocols like TCP/IP,MQTT. 
• Socket programming in Linux environment. 
• Good knowledge on protocols like (RS485, SPI, I2C, ADCs, CAN, LIN) 
• Knowledge of Blue-tooth communication protocols for BLE 4.2/5.1. 
• Proficient in the use of embedded SW Development tool chain (Flash/ debug tool chain, IDE). 
• Version Control Systems –GIT 
• Should have detailed knowledge on microcontrollers/microprocessors 
• Experience in scripting languages like Shell / CAPL / Make/Python etc. 
• Experience in using tools like Logiscope / Function Generator / Oscilloscope, etc. 
• Good knowledge in reading schematics and datasheets. 
• Excellent analytical skills and problem-solving skills. 
• Strong communication and interpersonal skills. 
• Must be a self-starter. 
• Ability to work as part of a dedicated project team and independently 

Hands-on experience in Autosar methodologies and workflows.

• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.

• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.

• Automotive Product Development Process knowledge (ASpice, ISO26262)

• Experience in one or more of Autosar BSW Modules stacks.

• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.

• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.

• Working knowledge on AUTOSAR ECU software architecture

• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools

• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules

• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes

• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)

Understand the flow of the AUTOSAR software from application till the underlying driver.

• Bachelors in Electronics & Communication or equivalent
• 6-10 yrs experience in embedded software development
• Hands-on embedded C skills (mandatory)
• Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
• Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
• Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
• Experience with any networking &  connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP
• Exposure to any IoT frameworks (desirable not mandatory) – IoTivity, AWS IoT, Azure IoT
• Experience with any device driver development, driver optimisation (desirable not mandatory)
• Good ability to read data sheets & technical manuals