Seize an exceptional opportunity at Himachal’s leading R&D Tech company, with over seven years of establishment and recognized as one of the fastest-growing tech firms in the Himachal-Tricity region. As a proud participant in the Make in India initiative and a strong advocate for the 'Vocal for Local' movement, Vihaas is managed by local professionals. We are dedicated to innovation and excellence in technology development, fostering a unique, hierarchy-free environment that promotes creativity and collaboration.
Key Responsibilities: -
• Full Lifecycle Design: Lead the design and development of digital and analogue electronics for telecommunications products, from initial concept through to production.
• Sensor and Interface Design: Develop sensor systems, including sensor conditioning circuits and interfacing electronics.
• Simulation and Analysis: Conduct simulations, perform calculations, and create detailed circuit designs to ensure optimal performance and reliability.
• Documentation: Prepare and maintain comprehensive design specifications, reports, and technical documentation.
• Validation and Verification: Drive validation and verification activities to confirm that designs meet all technical and functional requirements.
• Compliance: Ensure designs adhere to industry standards, functional safety requirements, and regulatory guidelines.
• Manufacturing Support: Provide support for manufacturing activities, both locally and internationally, including troubleshooting and optimization.
Skills and Competencies:
• Problem Solving: Strong analytical and problem-solving skills with a pragmatic approach to addressing technical challenges.
• Attention to Detail: High level of accuracy in design, analysis, and implementation.
• Innovation: Creative and lateral thinking to drive technological advancements in telecommunications.
• Communication: Excellent verbal and written communication skills for effective interaction with team members and stakeholders.
• Continuous Improvement: Commitment to ongoing professional development and process improvement.
• Hands-On Experience: Practical experience with electronics design, prototyping, and testing.
Essential:
• Bachelor’s degree in Electronic and Communication Engineering or a related field.
• Extensive experience (minimum 3 years) in the design, simulation, and testing of electronics systems specific to telecommunications.
• Proficiency in designing embedded processors, sensors, and interfacing electronics.
• Proven experience with multiple complete development lifecycles.
• Knowledge of design for EMC and addressing compliance issues.
• Familiarity with design for manufacture and test processes.
Desirable:
• Experience with microprocessors.
• Experience with SMPS (Switched-Mode Power Supplies) design and development.
• Background in interfacing with high voltage power electronics.
• Proficiency with Altium Designer and DFMEA (Design Failure Mode and Effects Analysis).
Subodh Popalwar
Software Engineer, Memorres
About Vihaas Design Technologies
Vihaas Design Technologies is a Himachal-based company that specializes in Research and Development, original equipment manufacturing (OEM), and design and development of unique products and systems. As an indigenous OEM, Vihaas designs and manufactures both commercial and military-grade Communication Products, catering to the “Make in India” initiative.
Key Focus
- Telecom product development and manufacturing with a focus on both commercial and military-grade products
- Utilizing state-of-the-art technologies to design and develop innovative products and systems
Mission Statement:
“To Design and Develop unique products and systems by making use of the state of art technologies”
Entity Description
Vihaas Design Technologies is a pioneering company in the Electronics Sector, committed to indigenous innovation and manufacturing. Its products and services cater to the growing demand for locally designed and developed telecom solutions.
Key Focus
- Telecom product development and manufacturing with a focus on both commercial and military-grade products
- Utilizing state-of-the-art technologies to design and develop innovative products and systems
Similar jobs
CC++Technical Lead (Embedded Software - Linux)
Job Responsibilities:
Lead a team of software/Linux development engineers working on microcontroller firmware development, Linux platform drivers and IOT solutions. Should be able to guide team members, resolve technical roadblocks and deliver project commitments. Will be the go-to person and first-level escalation point for all technical issues faced by the team. Looking for someone with 6+ years in the embedded industry and a passion to build a core team in a growing company. Team size will vary from 6 to 12 people, mainly firmware and Linux engineers.
The selected candidate for this role will be reporting to the software director/manager in the organization.
- Work with firmware and application architects to create a project execution plan
- Review project proposals for execution scope & timelines
- Lead embedded software development activities by the team
- Work with QA teams to resolve bugs and ensure release readiness
- Work with h/w design and PM teams to ensure smooth execution and timely delivery of projects
The main responsibilities of this role are:
Technical:
- Strong programming skills (C, C++, assembly)
- Linux development experience (porting & platform drivers)
- Expert-level knowledge of embedded microcontroller & microprocessor-based systems
- Prior experience in delivering critical modules for microcontroller projects
- Good understanding of commonly used embedded communication protocols
- Good understanding of common embedded peripherals, interfaces & sensors
- Experience working on Real-Time systems (RTOS)
- Should be able to quickly learn new technologies and enable the team on the same
- Should be able to work with minimal technical guidance
Leadership:
- This role requires excellent communication skills
- Strong analytical & problem-solving skills
- Should be able to lead junior engineers by providing technical mentoring
- Owns task division, task allocation and tracking within the team
- Require multi-tasking and time management skills
- Prior experience working with overseas clients
- Periodically report progress to management
Other desirable skills:
Knowledge of Python
Experience: 6 to 10 years
Skill Required
Technical
-
● The suitable candidate shall have most of the following knowledge /skills/experience:
-
● Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware
-
Design Life Cycle.
-
● Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).
-
● Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.
-
● Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.
-
● Circuit building and Circuit Analysis Skills.
-
● Component Data Sheet analysis skills.
-
● Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).
-
● Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).
-
● Knowledge about Board Bring Up process.
-
● Testing (Integration testing, protocol/Driver testing, etc.).
-
● Experience in Embedded C programming and embedded system integration and can develop test cases for the same.
-
● Knowledge of IoT Open Source Programming / Development.
-
● Candidate will be responsible for research & development of M2M/IoT products.
-
● Candidate will be responsible for end-to-end embedded system integration.
-
Others
Abilities on the following shall be of added advantage:
-
● Component Procurement
-
● Vendor Interaction
-
● Tools Management
-
● Costing and resource estimation
-
● Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative
-
-
Decision level
Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending MachinesDemonstrate (Key competencies)
Healthy knowledge of most of the following:
-
● Embedded C
-
● 8/16 bit Microcontrollers
-
● Atmel Studio/ Arduino IDE
-
● Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)
-
● Hands-on experience on Test equipment and solder stations (SMD/DIP)
-
● M2M / IoT based development
StartUp engaged in inventing and innovating Smart Energy Meters and related Technologies (OEM) requires Embedded Engineers. Following re-innovation principle and Technology First direction, we design Technologies to deliver our Vision of the highest Quality Products and Technologies. The candidate's responsibilities include IoT (COSEM/DLMS), technology integration. Required skills include Embedded C and C++ and knowledge of Electrical and Electronics.
Job Description
Embedded Software/Firmware Design and Development on OS/Non-OS based platform
Necessary system architecture development and implementation
Device, sensor and gateway selection and integration based on industry use case.
Development on Image Analytics and Cloud/Platform integration
Development or integration of Cloud/Platform communication protocol
Technical Documentation and Testing of the developed system
Desired Skills, Knowledge& Experience
B. Tech/M. Tech/MCA with 8-10 years of industry experience
Strong programming skills in C/C++ and Python development in Linux
Experience in device or sensor communication interfaces (wired/wireless, short range/long range).
Experience of microcontroller and microprocessor.
Knowledge of IoT gateway firmware development, container, and OS hardening.
Experience in device communication protocol, Edge computing and processing
Competent in application development for Image processing, transmission, and storage
Good understanding and of programming primitives, data structures, multi-threading and memory management techniques
Strong command over complex sensor and hardware control logic to work seamlessly with edge devices or gateway
Proactive and Self motivated
Strong verbal and written communication skill
CC++Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.
Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.
JOB ROLE: EMBEDDED SYSTEMS ENGINEER
ROLES AND RESPONSIBILITIES:
- Work with multi-disciplinary engineering team and customer to identify and recommend hardware needs and requirements for project/product.
- Modify or assist in the development of software architecture and design for new products, prototype, or re-design, including sourcing build environments and writing technical support and control documentation.
- Read Block Diagrams and detail circuit schematics and layout of proposed or existing hardware and assess the software and driver requirements.
- Participates in cross-divisional Edge IoT projects and/or proposals.
- Develop, oversee, and document automated tests for electrical hardware design and products as well as final operating drivers and systems.
- Evaluate and investigate product failures, and recommend repair or design modifications based on specifications, cost, resources, and risks.
REQUIREMENTS:
- Ability to creatively approach challenges and cleverly solve difficult problems.
- Ability to independently identify daily design and customer support tasks, self-start and motivate.
- Ability to manage several projects and prioritize appropriately, with minimal supervision.
- Ability to work in a collaborative team environment as well as independently.
- Ability to learn and work in virtual environments (CAD & Hardware build packages) in-which candidate’s skills are low but persevere and overcome skill gaps autonomously.
- Some experience programming with embedded systems designs and multithreaded real-time operating systems is required.
- Solid programming experience. Preferably in C or C++, .NET, and Java programming languages.
EXPERIENCE:
We as a team are looking for freshers or young professionals with (0-4 years of experience) passion and eagerness to create scalable and optimized software systems and execute complete embedded software development lifecycle.
- Looking for engineers with one of the below requirements:
- 3+ years of embedded development experience in a Linux environment
EDK2 experience
SCT experience
knowledge of TPMs
oWith Option2:
worked on bootloaders or uboot
- Total Experience:
- Rel Experience in Embedded development:
- Rel Experience in Linux:
- Rel Experience in C:
- CCTC:
- ECTC:
- NP:
- Company:
- Current Location:
- Reason for Job change:
- Offer:
- Open for a contract position?:
C
Job Description:
Looking for engineers with one of the below requirements:
- 2-5 years of embedded development experience in a Linux environment with C programming
- With Option1:
- EDK2 experience
- SCT experience
- knowledge of TPMs
- With Option2:
- worked on bootloaders or uboot
Python
Follow CutshortSubodh Popalwar
Software Engineer, Memorres