Dear All Automotive professionals, Global Tech Infosolutions currently hiring for multiple positions.
We are looking for a professional Embedded Developer for Pune/Bangalore to execute a complete embedded software development lifecycle.
Requirement:
Must have 2 to 5 years of experience in the Automotive domain.
Bachelor's degree in Electronics Engineering or computer science.
Experience in writing software for embedded controllers 16/32-bit MCUs like Freescale, and Renesas (RL78/ RH850x).
Must have programming experience in Embedded C (i.e., experience in multi-threading, understanding of variable scopes, pointer operations and following general coding guidelines
Designing and implementing software for embedded devices and systems
Designing, developing, coding, testing, and debugging system software
Working experience on Communication Protocols like CAN 2.0, CAN FD,
Understanding of J1939, UDS, BLE.
Working experience on low-level device drivers like UART, I2C, SPI, CAN
Skills:
Knowledge of Key Peripherals: USB Ethernet Bluetooth, PCIe, CAN, SPI, I2C & UART TIMERS
CAN, Microcontroller Microprocessor
Team player
Able to articulate issues/fix and participate in discussions
#Apply now
Location- Pune (on-site)
#automotivejobs #automotivecareer #GThiring #Punejobs #bangalorejobs #embeddeddevelopers
About Global Tech Info Solutions
Similar jobs
Basic Qualification: BE / Btech Computer Science
Desirable Skills:
1.Software development using Embedded C, C++ with programming standards (MISRA)
2.Knowledge of bus systems, which are used in the automotive industry, like CAN, LIN, I2C, SPI, etc)
3.Software development processes –A-SPICE V-cycle
4.Experience with development of control units for the automotive industry, especially experience with the development based on AUTOSTAR basic software.
5. Experience in the automotive industry according to common development and parameterization tools (i.e. Vector CANoe).
6.Knowledge of standards for safety-critical software (ISO 26262) is a plus.
Roles and Responsibilities:
- Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
- Experience with Embedded C/C++.
- Experience with Raspberry Pi, Python, and OpenCV.
- Experience with Low power Devices would be preferred
- Knowledge about communication protocols (UART, I2C, etc.)
- Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
- Experience with 3d modeling (preferred).
- Experience with 3d printers (preferred).
- Experience with Hardware design and knowledge of basic electronics.
- Experience with Software will be preferred.ss
Detailed Job role (daily basis) done by the IOT developer.
· Design hardware that meets the needs of the application.
· Support for current hardware, testing, and bug-fixing.
· Create, maintain, and document microcontroller code.
· prototyping, testing, and soldering
· Making 3D/CAD models for PCBs.
Primary skills:
At least 3+ years of working experience on embedded firmware development
- Experience in multithreaded programming, network programming (wired and wireless protocols), real-time programming, cross-platform and cross-language development
- Hands-on experience on driver development for various sensors
- Working knowledge of communication protocols like UART, I2C, SPI, USB, Ethernet, etc
- Product development experience with range of microcontroller/microprocessor architectures, adoption of bare-metal, RTOS and Linux operating systems on new platforms
-Hands-on experience on software development in Bluetooth domain is added advantage
- Experience with hardware lab equipment such as digital scope, logic analyser and JTAG
- Understanding of embedded development constraints and system performance
- Experience with programming in C/C++ and Embedded C
Technical Lead (Embedded Software - Linux)
Job Responsibilities:
Lead a team of software/Linux development engineers working on microcontroller firmware development, Linux platform drivers and IOT solutions. Should be able to guide team members, resolve technical roadblocks and deliver project commitments. Will be the go-to person and first-level escalation point for all technical issues faced by the team. Looking for someone with 6+ years in the embedded industry and a passion to build a core team in a growing company. Team size will vary from 6 to 12 people, mainly firmware and Linux engineers.
The selected candidate for this role will be reporting to the software director/manager in the organization.
- Work with firmware and application architects to create a project execution plan
- Review project proposals for execution scope & timelines
- Lead embedded software development activities by the team
- Work with QA teams to resolve bugs and ensure release readiness
- Work with h/w design and PM teams to ensure smooth execution and timely delivery of projects
The main responsibilities of this role are:
Technical:
- Strong programming skills (C, C++, assembly)
- Linux development experience (porting & platform drivers)
- Expert-level knowledge of embedded microcontroller & microprocessor-based systems
- Prior experience in delivering critical modules for microcontroller projects
- Good understanding of commonly used embedded communication protocols
- Good understanding of common embedded peripherals, interfaces & sensors
- Experience working on Real-Time systems (RTOS)
- Should be able to quickly learn new technologies and enable the team on the same
- Should be able to work with minimal technical guidance
Leadership:
- This role requires excellent communication skills
- Strong analytical & problem-solving skills
- Should be able to lead junior engineers by providing technical mentoring
- Owns task division, task allocation and tracking within the team
- Require multi-tasking and time management skills
- Prior experience working with overseas clients
- Periodically report progress to management
Other desirable skills:
Knowledge of Python
Experience: 6 to 10 years
Min 4 Years Experience in Embbeded domain
1. C++
2. C++ ★ Profinet ProfiSAFE ★ Embedded RTOS
3. rtos c c++ python ★ Industrial protocols Embedded Security Threat Modeling ★ Embedded C Embedded Linux
4. Embedded Systems ★ Embedded C ★ C++ ★ RTOS
Skill Required
Technical
-
● The suitable candidate shall have most of the following knowledge /skills/experience:
-
● Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware
-
Design Life Cycle.
-
● Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).
-
● Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.
-
● Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.
-
● Circuit building and Circuit Analysis Skills.
-
● Component Data Sheet analysis skills.
-
● Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).
-
● Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).
-
● Knowledge about Board Bring Up process.
-
● Testing (Integration testing, protocol/Driver testing, etc.).
-
● Experience in Embedded C programming and embedded system integration and can develop test cases for the same.
-
● Knowledge of IoT Open Source Programming / Development.
-
● Candidate will be responsible for research & development of M2M/IoT products.
-
● Candidate will be responsible for end-to-end embedded system integration.
-
Others
Abilities on the following shall be of added advantage:
-
● Component Procurement
-
● Vendor Interaction
-
● Tools Management
-
● Costing and resource estimation
-
● Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative
-
-
Decision level
Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending MachinesDemonstrate (Key competencies)
Healthy knowledge of most of the following:
-
● Embedded C
-
● 8/16 bit Microcontrollers
-
● Atmel Studio/ Arduino IDE
-
● Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)
-
● Hands-on experience on Test equipment and solder stations (SMD/DIP)
-
● M2M / IoT based development
- 32-bit Microcontroller knowledge is essential (ARM Cortex based micro-controllers (STM32).
- Esp32 architecture knowledge is essential.
- Strong experience in C, C++, Free-RTOS
- Strong experience in CUBEMX IDE, MDK Version 5 – Keil, Arduino IDE environment
- Good knowledge in HW and communication protocols like CAN, SPI, UART, I2C, USB
- Good knowledge in TFT Displays and Sensors is added advantage
- Good knowledge of implementation of motor controls as required, pulse width modulation schemes (PWM).
- Good knowledge of power electronics (TRIACs, MOSFETs, IGBTs, gate drivers) and require protections (Over/under voltage/current).
- Document firmware designs, specifications, test plans, revisions and produce test reports
INNOPHASE is a rapidly growing communications semiconductor startup with headquarters located in San Diego, CA. It is an exciting time to join InnoPhase and work with a brilliant team of engineers to design innovative wireless products and solutions for IoT/5G.
InnoPhase Bangalore is looking for a Senior Design Verification (DV) Engineer to join a growing start up semiconductor development organization and to help drive excellence in our IOT/5G products.
Responsibilities:
- Follow and help define the team's design verification methodology.
- Write bus functional models that drive and monitor stimulus.
- Plans and implements block and integration level scoreboards and checkers to verify functional behavior.
- Experience constructing chip-level System Verilog and UVM test bench environments, writing System Verilog Assertions (SVAs), with embedded software design and test.
- Develop RAL test plan at SOC/IP level and its implementation.
- Write and analyze functional coverage, providing input to block-level milestones.
- Triage regression failures and identify logic bugs, while driving bug closure.
- Debug test cases and report verification results to achieve the expected code/functional coverage goal. Utilize constrained random verification, functional coverage, code coverage and assertions to achieve goals.
Knowledge and Skills Required:
- Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science or equivalent.
- 5+ years of experience in VLSI design or verification
- Excellent collaboration, teamwork and communication skills
- Significant experience in reviewing and modifying IP block verification plans, a real plus if created such plans in collaboration with design engineering.
- Track record of completing IP block verification to acceptable coverage metrics.
- Excellent debugging skills, with experience debugging RTL in the block and/or chip-level environments.
- Working knowledge of OVM or UVM methodologies.
- Good analytical and problem-solving skills.
- Proficient knowledge of programming and scripting, hardware description language, electronic design automation (EDA), and/or FPGA tools.
Experience in programming Embedded C applications.
• Strong development experience in embedded C and RTOS
• Strong debugging skills
• Embedded development tools and methodologies
• Version Control Systems – Clear Case / RTC /GIT
Should have detailed knowledge on microcontrollers / microprocessors
Should have detailed knowledge on Battery Electric Vehicle Powertrain (BEV), Fuel Cell and H2-Motor
Should have detailed knowledge in powertrain function development for BEV, Fuel Cell and H2-Motor
Strong development experience in MATLAB for powertrain function development
Strong development experience in CAN / LIN /Flexray / UDS / KWP, SPI communication protocols
Knowledge in tools like CANalyser / CANoe, CANDiva, CANstress, CANDELA studio, Lauterbach
Experience in scripting languages like Shell / Perl / CAPL / Make etc.,
Experience in using tools like Logiscope / Function Generator / Oscilloscope, etc
Experience in configuration management & defect tracking tools
Automotive domain and powertrain systems knowledge a plus
Ability to work as part of a dedicated project team and independently
Strong communication and interpersonal skills.
Must be a self-starter.