6+ FPGA Jobs in Bangalore (Bengaluru) | FPGA Job openings in Bangalore (Bengaluru)

Responsibilities

• End-to-End Embedded/DSP system design.

• Complex logic implementation using RTL coding techniques (preferably VHDL and HLS)

• Able to implement various complex algorithms and curve fitting/Neural network based algorithms inside the FPGA hardware.

• Writing modular RTL codes and design techniques using IPs.

• Simulating the design at various stages of development.

• CDC, STA, area/power optimizations, floor planning, linting.

• Interfacing high speed ADCs/DACs using state of the art data transfer links to FPGA.

• Using DDR RAM and SG-DMA for low latency, high-speed data transfer.

• Familiarity with high-speed communication systems viz. USB 3, PCIe, Gbe, 10 Gbe, 100

Gbe etc.

• Linux device driver development.

Skills

• VHDL/Verilog, C/C++, familiar with Xilinx development tools.

• Design knowledge of PCIe, LVDS, SPI, AXI, USB etc. interfaces.

• Ability to design using primitives instead of inferred design from RTL.

• Embedded linux device drivers, petalinux, exposure to yocto project.

• Exposure to various compression algorithms.

Desired Qualification/Experience

• Talent and zeal to work with new challenging system designs.

• Thorough understanding of digital systems.

• Hands-on experience on the RTL design, preferably with a repository of previous

projects

PCB Design Engineer

Roles and Responsibilities:

Job Role:

• Utilize CAD System to prepare printed circuit board (PCB) documentation (e.g., schematic diagrams, layouts, assembly drawings and Bills of Material).
• Create documentation for the manufacture and fabrication of PCBs following PCB Department standards.
• Collaborative work with mechanical, firmware, thermal design, manufacturing test, and DVT engineers.
• Start to finish ownership of controller PCBAs – from specification to design, prototype, and manufacturing.

Required Skills:

• Relevant coursework or work experience.
• High-speed PCB design, board routing from scratch & simulations for EMI/EMC
• PDN analysis
• Experience in the selection and use of DSPs, microcontrollers, and programmable logic devices and their peripheral circuitry (signal conditioning, board-level power supplies.)
• Medium to high volume DFT and DFM.
• Experience in supervision of PCB layout, plane definition, and EMC optimization.
• Proficiency with basic EE tools (scopes, network analyzers, etc.)
• Embedded programming of DSPs and FPGAs in real-time control applications.

Preferred Skills:

• Knowledge of basic control theory, including the importance of sensor bandwidths, and design of compensation networks.
• Knowledge of automotive environmental, reliability, and safety requirements.
• Knowledge of automotive networking (e.g. CAN, LIN) standards.
• Knowledge in power semiconductors and switched-mode power conversion

Education:

• Bachelor or higher degree in Electrical Engineering or equivalent experience.

Responsibilities

 Develop an effective test suite based on the FPGA requirements.

 Testbench architecture with System Verilog and UVM

 Develop test environments based on the architecture.

 Develop Agents, Drivers, Monitors, Predictors, Scoreboard, and Sequences etc.

 Actively participate in a team environment, working with verification,

architecture, applications, and design teams to develop comprehensive

verification plans and address issues.

 Verification environment development/update for block level and system level.

 Own and drive verification related activities, provide technical support, and

proactively manage tasks to meet schedule goals.

 Define and develop effective functional assertions and coverpoints

 Debug the design issues and report through appropriate tools

 Code Coverage analysis and test case identification for improving the code

coverage.

 Perform timing simulations.

 Apply techniques and skills required to identify a root cause of a given issue and

very good debugging skills.

 Technical guidance to the junior engineers on verification tasks.

Qualifications

 Bachelor's/Master's degree in Engineering (Electronics and Communication or

VLSI )

 10+ years of Industry experience in development, integration & verification of

ASIC/FPGA.

 Protocols – PCIe, SPI, ARINC 429, Mil 1553, Image processing or similar.

 Hands on experience in developing System Verilog/UVM verification

environment from scratch.

 Hands on experience with Questa or similar advanced simulation tools.

 Hands on experience in DO-254 verification process.

 Experience in DOORS/Jama will be a plus.

 Experience in Video domain will be a plus.

About the role

Experience in Firmware/Software programming in embedded Linux & RTOS based application development. Candidate must have a very good understanding of ARM processor, hardware and custom board or product development experience.

Roles and Responsibilities:

• Design, code and integrate software for an embedded Linux/RTOS targeted application (applications, drivers, framework)
• Customization, deployment and maintenance of Linux distribution
• Interact with Linux kernel, integrate new device drivers Improvement and maintain existing software components
• Perform unit test, Integration test, verification and validation of the product developed.
• Assist with the hardware design surrounding the processor
• Document the projects according to standards (protocols, architecture, technical specifications, etc.)

Qualifications:

• Bachelor degree in Electronics or computer science engineering.
• Minimum 6 - 12 years of experience in embedded Linux programming.

Specific skills:

• Expert in C programming with RTOS.
• Hands-On experience with Protocol development.
• Nice to have Protocol development experience such as USB or DP, HDMI or equivalent.
• System level design and understanding of overall system
• Strong knowledge of Linux, ARM processor architecture with SOC, FPGA interface is a plus.
• Hand-on experience on Linux kernel and device-driver development and debugging.
• Knowledge/Experience of TCP/IP, Network programming.
• Ability to write effective and reusable code according to best practices.
• Must be a dynamic, autonomous, and team-oriented individual.
• Knowledge of hardware and low-level development is an asset.

Position: Senior Hardware Engineer

Requirement: Immediate joining

Job Description for the above position:

➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.

➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.

➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.

➢ Excellent component selection and decision-making skills.

➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must

Requirement.

➢ Experience in a range of technologies including digital, analog and power electronics.

➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.

➢ Excellent knowledge of electronic circuits and analysis.

➢ Familiarity and Experience with Altium Designer and Allegro tools.

➢ The ability to work with software engineers to design and debug systems.

➢ Experience in Thermal analysis, Load analysis and Timing analysis.

➢ Knowledge of Signal integrity and power integrity.

➢ Experience in system-level design, logical design etc.

➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.

➢ Good knowledge of EMI/EMC testing procedures and Certification standards.

➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.

➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE

video standards a plus.

➢ Hands-on experience in design/troubleshooting/updating hardware.

➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.

➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.

➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...

➢ Strong knowledge on layer stack-up build.

Qualification:

➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person 

Specification/Competencies: 

➢ Self-motivated 

➢ The ability to work independently, within or lead the team. 

➢ Well organized 

➢ Strategic thinker. 

➢ Proactive 

➢ Ability to manage multiple tasks and work toward long-term goals. 

➢ Excellent communication skills (verbal and written) 

➢ Solid understanding of engineering fundamentals and technical problem-solving skills. 

➢ Experience in establishing and sustaining strong relationships with the extended team.