Sr Hardware Engineer at Product development & Services · Bengaluru (Bangalore) · 5 - 7 years · ₹7L - ₹12L / yr · Posted 16 Jun 2022
ExpressPosition: Senior Hardware Engineer
Requirement: Immediate joining
Job Description for the above position:
➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must
Requirement.
➢ Experience in a range of technologies including digital, analog and power electronics.
➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.
➢ Excellent knowledge of electronic circuits and analysis.
➢ Familiarity and Experience with Altium Designer and Allegro tools.
➢ The ability to work with software engineers to design and debug systems.
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.
➢ Good knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.
➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE
video standards a plus.
➢ Hands-on experience in design/troubleshooting/updating hardware.
➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.
➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.
➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...
➢ Strong knowledge on layer stack-up build.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person
Specification/Competencies:
➢ Self-motivated
➢ The ability to work independently, within or lead the team.
➢ Well organized
➢ Strategic thinker.
➢ Proactive
➢ Ability to manage multiple tasks and work toward long-term goals.
➢ Excellent communication skills (verbal and written)
➢ Solid understanding of engineering fundamentals and technical problem-solving skills.
➢ Experience in establishing and sustaining strong relationships with the extended team.
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs (2)
Interested in designing award-winning wearables while managing challenging constraints so that your products are used everyday by millions of users? Then read on..
ULTRAHUMAN • HARDWARE
Hardware Design Engineer Wearables
Bangalore (Kudlu Gate)| • On-site | Full-time |
ABOUT THE ROLE
Ultrahuman's Hardware division builds award-winning wearables the Ultrahuman Ring and Ring Air pushing consumer technology in health and metabolic fitness. We're looking for a Hardware Design Engineer to own electronics design for our next-generation smart rings, from architecture and schematic capture through PCB layout, bring-up, and mass production.
This is a hands-on role at the extremes of miniaturization and power efficiency. You'll make architecture-level component decisions, drive high-density and RF layout, and take designs through NPI to volume — working closely with mechanical, firmware, and manufacturing teams on fast product cycles.
KEY RESPONSIBILITIES
Architecture & Schematic Design
- Translate product requirements into hardware architecture, then into schematics and manufacturable PCB designs using OrCAD / Allegro (Cadence).
- Own component selection across MCU/SoC, PMIC, sensor AFEs, and RF front-ends — balancing size, power, cost, and supply availability.
- Handle schematic-to-layout conversion and netlist import; create and maintain symbol/footprint libraries and land patterns.
High-Density & RF Layout
- Design and review high-density (HDI), rigid, and rigid-flex PCB layouts for space-constrained wearable form factors.
- Design 2.4 GHz BLE antennas and NFC coils, matching networks, and controlled-impedance routing; support antenna tuning and RF validation.
- Apply signal-integrity best practices for high-speed digital interfaces and mixed-signal boards.
Power & Low-Power Design
- Architect power trees around PMICs, buck/boost converters, and LDOs, including Li-ion charging for small-capacity cells.
- Build and validate ultra-low-power current budgets to meet multi-day battery-life targets.
- Strong grasp of power electronics and active/passive component behaviour.
Sensor Integration
- Integrate optical biosensing (PPG) AFEs, IMUs, temperature sensors, and haptics; own I²C/SPI interface design and analog front-end layout.
Manufacturing & DFM
- Own Gerber/ODB++ release, fabrication and assembly drawings, panelization, and full manufacturing data packages.
- Prepare and maintain BOMs; evaluate and qualify alternate / second-source components.
- Drive DFM/DFA reviews with fab and SMT/EMS partners; support NPI through EVT/DVT/PVT to mass production.
- Sound understanding of PCB materials, stackups, and component assembly processes.
Compliance, Reliability & Validation
- Apply EMI/EMC, thermal, and mechanical design best practices.
- Support pre-compliance and certification across FCC, CE, BIS, and RoHS, and familiarity with IEC standards for PCB design safety.
- Coordinate with test engineers on board bring-up and PCB validation; run circuit simulations for RF and signal/timing optimization.
Ownership & Collaboration
- Independently manage hardware projects end-to-end, including vendor coordination and delivery of final hardware.
- Collaborate with mechanical engineers to optimize designs and meet project timelines.
- Bring the latest design tools, methodologies, and industry best practices into the team.
REQUIRED QUALIFICATIONS
- Bachelor's or Master's in EEE, Electronics, or equivalent practical experience.
- 4+ years of hands-on hardware / PCB design experience, ideally in consumer electronics or wearables.
- Proficiency with a leading schematic and PCB toolchain (OrCAD / Allegro preferred).
- Proven track record taking a product from schematic through layout to volume production.
- Working knowledge of power electronics and active/passive component selection.
- Familiarity with global certifications (FCC, CE, BIS, RoHS) and IEC PCB safety standards.
PREFERRED / BONUS
- Experience with miniaturized high-density or rigid-flex designs.
- RF design experience (2.4 GHz / BLE, NFC, antenna tuning and matching).
- EMI/EMC design and pre-compliance testing experience.
- Low-power / battery-operated wearable product experience.
- Familiarity with reliability methods (DFMEA, derating) and RF / signal-timing circuit simulation.
ROLE SUMMARY:
An experienced, hands-on engineering role owning the electrical and electronics hardware content of motor-drive and sensor systems. The Electrical / Electronics / Instrumentation Engineer is responsible for power distribution and motor-drive power-stage design, sensor interface boards, and taking boards through EMI/EMC compliance, with full ownership of schematic capture and layout from concept to fab-ready.
RESPONSIBILITIES:
- Design power distribution and the motor-drive power stage (gate drives, current sense, H-bridge/inverter stages)
- Implement supervised discrete-line circuitry per IF-08 ICD requirements
- Design sensor interface boards (resolver, encoder, analog/digital signal conditioning)
- Take boards through EMI/EMC compliance for MIL-STD-461
- Own schematic capture and layout in Altium or KiCad end-to-end, from concept to fab ready.
REQUIRED QUALIFICATIONS
- B.E./B.Tech/M.E./M.Tech. in Electrical, Electronics & Communication, Electronics & Instrumentation, or any other relevant field.
- 4-8 years of relevant experience.
KEY COMPETENCIES
- Hands-on power electronics: gate driver design, current sensing, protection circuitry
- Analog signal conditioning for sensor front-ends (resolver, encoder, LVDT-class signals)
- Practical EMI/EMC design experience, ideally against MIL-STD-461 or equivalent (automotive/industrial EMC also considered)
- Strong Altium or KiCad skills — layout discipline for power + mixed-signal boards.
- Prior work on ICD-driven or interface-controlled discrete I/O circuitry
- Defence, aerospace, or automotive electronics background
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon