11+ Broadband Jobs in Bangalore (Bengaluru) | Broadband Job openings in Bangalore (Bengaluru)

Experience

• 15+ years with deep expertise in Telecom domain spanning FTTx/PON, L2/L3 Packet Transport (Ethernet Switching and IP Routing) and Cloud networking from both traditional products and transformational products (disaggregated, virtualized, and based on open-source software).  

Key Responsibilities:

• Architectural (design and implementation) ownership of the Radisys BBA solution
• Architect product in consultation with PLM, pre-sales, and customers
• Contributing to and working on strategic deals, enterprise frameworks and comfortable presenting to senior leadership and Customers.
• Ability to quickly engage in proposals, work in a fast-paced environment and have the ability to multi-task.

Domain Skills Requirement:

• Deep knowledge of Telecom with FTTH solution is a must.. Hands-on experience in developing access solutions based on PON technologies
• Experience with deploying product at scale in a carrier-grade network
• Hands-on experience in developing Microservices in a container, orchestration, CI/CD-based environment.
• SDN and NFV 
• Wireline: ONF’s SEBA and VOLTHA Community and the challenges 
• CUPS (Control and User Plane Separation) 
• Wireline Access: OLTs, BNGs, ONTs, Residential Gateways (RGs) 
• PON Technologies: GPON, XGS-PON, NGPON-2, and Higher speed next gen PON standards (25G, 50G, 100G) 
• Ethernet Switching (L2) & IP Routing (L3); Software Defined Networking (ONOS, ODL) 
• Installing, running, and managing with Kubernetes (k8s) and Containers 
• Management and Orchestration (e.g., ONAP), Network Management, OSS/BSS, and TM Forum standards 
• Practitioner of Agile/SCRUM/SAFe

Qualification:

• Masters / Bachelor in any discipline of Engineering (Computer Science, Electronics preferred)

Job Summary

We are seeking a highly skilled and motivated Linux Device Driver Engineer with strong C/C++ programming skills and hands-on experience in Linux driver development. The ideal candidate will have a proven track record of working with kernel modules and hardware interfaces, and be comfortable debugging and optimizing low-level system software.

Key Responsibilities

• Porting existing Linux device drivers to new platforms, SoCs, and kernel versions.
• New driver development for custom hardware components and peripherals.
• Debugging kernel and driver-level issues using industry-standard tools.
• Integration & bring-up of hardware with Linux-based systems.
• Collaborate with hardware teams to interpret specifications and enable device functionality.
• Optimize drivers for performance, reliability, and resource efficiency.
• Write clear technical documentation for driver APIs, design, and integration steps.

Required Skills & Qualifications

• Bachelor’s/Master’s in Computer Science, Electronics, or related field.
• 4 to 8 years of professional experience in software development.
• Strong proficiency in C/C++ programming and memory management.
• Hands-on experience with any Linux device driver (character, block, network, USB, PCIe, I2C, SPI, etc.).
• Good understanding of Linux kernel architecture, module programming, and build systems.
• Knowledge of interrupt handling, DMA, and device tree configuration.
• Familiarity with cross-compilation and embedded Linux toolchains.
• Experience with debugging tools (GDB, ftrace, perf, printk, etc.).
• Version control experience (Git).

Preferred Skills

• Exposure to multiple driver types (networking, storage, multimedia, etc.).
• Experience with Yocto, Buildroot, or similar embedded Linux environments.
• Knowledge of real-time Linux and RT patches.
• Scripting knowledge (Python, Bash) for testing and automation.

Soft Skills

• Strong analytical and debugging skills.
• Good communication and collaboration abilities.
• Ability to work independently and take ownership of deliverables.

Responsibilities:

• Design and implement embedded software applications for IoT devices using C programming language.
• Develop and maintain firmware for Raspberry Pi-based systems, ensuring optimal performance and compatibility with various IoT sensors and peripherals.
• Collaborate with hardware engineers to define and document system requirements and specifications.
• Conduct thorough testing and debugging of embedded software to identify and resolve any issues or bugs.
• Optimize code and improve system performance to enhance the overall user experience.
• Stay updated with the latest industry trends and technologies in embedded systems and IoT development.
• Work closely with the product management team to translate customer requirements into technical specifications.
• Provide technical support and guidance to the team during the development and deployment phases.
• Participate in code reviews and contribute to the continuous improvement of software development processes.

Qualifications:

• Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.
• Strong proficiency in C programming language with a solid understanding of embedded systems.
• Experience developing software for Raspberry Pi or similar single-board computers.
• Knowledge of IoT protocols and technologies such as MQTT, CoAP, TCP/IP, and wireless communication (Wi-Fi, Bluetooth, etc.).
• Familiarity with various sensors, actuators, and electronic components commonly used in IoT devices.
• Solid understanding of software development methodologies and version control systems (e.g., Git).
• Strong problem-solving skills and the ability to debug complex issues in embedded systems.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Prior experience in developing IoT applications or working on IoT projects is a plus.

SAP, hybris, SPRING, JAVA, JQUERY, ANT, ECLIPSE, MAVEN, SVN, GIT, SQL

About the role

Experience in Firmware/Software programming in embedded Linux & RTOS based application development. Candidate must have a very good understanding of ARM processor, hardware and custom board or product development experience.

Roles and Responsibilities:

• Design, code and integrate software for an embedded Linux/RTOS targeted application (applications, drivers, framework)
• Customization, deployment and maintenance of Linux distribution
• Interact with Linux kernel, integrate new device drivers Improvement and maintain existing software components
• Perform unit test, Integration test, verification and validation of the product developed.
• Assist with the hardware design surrounding the processor
• Document the projects according to standards (protocols, architecture, technical specifications, etc.)

Qualifications:

• Bachelor degree in Electronics or computer science engineering.
• Minimum 6 - 12 years of experience in embedded Linux programming.

Specific skills:

• Expert in C programming with RTOS.
• Hands-On experience with Protocol development.
• Nice to have Protocol development experience such as USB or DP, HDMI or equivalent.
• System level design and understanding of overall system
• Strong knowledge of Linux, ARM processor architecture with SOC, FPGA interface is a plus.
• Hand-on experience on Linux kernel and device-driver development and debugging.
• Knowledge/Experience of TCP/IP, Network programming.
• Ability to write effective and reusable code according to best practices.
• Must be a dynamic, autonomous, and team-oriented individual.
• Knowledge of hardware and low-level development is an asset.

• Hands-on embedded C skills (mandatory)
• Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
• Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
• Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
• Experience with any networking &  connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP

Position Overview:

This position is part of highly skilled fimrware team that do software board bring up of bare silicon for next generation products. In order to write system software for embedded electronic products, this position requires academic background in electronics engineering to understand hardware concepts such as digital logic, schematics, and microprocessor communications to develop effective embedded software.

Candidate should have complete knowledge of Software development cycle from architecture definition to the implementation.

Responsibilities:

• Must wear multiple hats from analyzing field and factory reported issues to software integration.
• Be a liason for troubleshooting and debugging complex systems and identifying the root cause.
• Develop detailed design documents and customer facing application notes for the system and IOT features for Mobile routers.
• Act as a product lead and be part of bigger team in software bring up.   
• Ability to work on Low level software such as bootloaders and understanding of low level functional blocks is a must.
• Work on Linux kernel and configuration.
• Write or port device drivers for Ethernet, USB, GPIO, LED, Bluetooth, Accelormeter, LCD and touch screen.
• Debug stability issues in data routing between WAN and LAN interfaces.
• Work with Software QA with test plan and execution.
• Work with Hardware team to identify and root cause stability problems.

Experience/Requirements:  

• Demonstrable knowledge of C, C++, Assembly programming skills
• Overall 10+ years of experience in embedded environment preferabily Linux.
• Board bring up proficiency with bootloaders and other low level software, must be very good with debugging techniques.
• Experience in TCP/IP networking is must for trouble shooting throughput and other traffic issues.
• Driver experience with I2C, SPI, UART, LCD, Ethernet, PCIe is a plus.
• Experience with low level debugging using JTAG.
• Experience with Makefiles, and build environments such as PTXDIST, Yocto and Buildroot.    
• Experience with version control such as git and svn.
• Good communication skills and team player.
• Ability to work independently and autonomously to meet deadlines, in a fast-changing environment.

Education:

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SOFTWARE ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with Hardware, Systems and other multi-functional teams and deliver high quality software at fundamental layer of operating system including frameworks, daemons, drivers.
• You need to keep security and performance in mind, enable key features to improve privacy and prevent fraudulence
• The position requires high level thinking to design code solutions along with low level programming and excellent communications and leadership skills, with the ability to work in a fast paced environment.

RESPONSIBILITIES:

• Rich experience of programming on cryptography
• Profound understanding on Operating System concept
• Highly self-motivated and capable of work and finish tasks alone
• Comfortable and adaptable in a fast-paced environment
• Fluent in both oral and written English
• Strong communication and interpersonal skills; excellent judgment

EXPERIENCE:

• We as a team are looking for freshers or young professionals with 0-4 years of experience having a a self-directed, proactive approach to tackling problems and working through impediment and an ability to generate trust and build alliances with co-workers.

• Looking engineers with 3 - 4 years of experienced embedded software and embedded Linux developers
• Design and implement Embedded Linux based applications
• Design and implement embedded software for telematics and IoT products
• Code review and optimization
• Develop board support packages for new hardware designs
• Provide customization and field support
• Closely work with the hardware development team

Requirements:

• BE/BTech in ECE, EEE or CS
• 3 - 4  years of experience in embedded software and embedded Linux development
• Good working experience in Linux applications and drive development
• Good C programming skills
• Good knowledge of OS programming
• Familiarity with configuration management tools
• Good communication skills

• Work directly with the other Software/Firmware Engineers and Electrical/RF/Systems Test Engineers to write needed software
• Design and implement software platform for firmware on embedded CPUs with multiple OS such as Windows, Linux, FreeRTOS, TI-RTOS and embedded Linux
• Use compliers, debuggers revision control and automated build systems.
• Design/develop components of software platform for use by other developers to extend its capabilities and build custom applications/behavior on top
• Develop build methodologies, debugging tools/utilities
• Develop and release Software using Agile methodology
• Write unit tests and support continuous integration and automated test methodology
• Brainstorm for new ideas and ways to improvement product and processes
• Consult with peers for feedback during debug/testing stages
• Document and maintain design processes