Autosar Developer with BSW

Education : B.Tech / M.Tech only

MANDATORY CRITERIA:

• It's a Contractual role for a particular project ongoing in the company, duration will be 1 year or may exceed as per the project requirement, After that the candidate will be kept on permanent role.
• The candidate will be on company's payroll only.
• Candidate should be comfortable for directly visiting and working with client's place.
• Immediate to 15 days joiner preferred
• 3 to 5 years of hands-on experience in Linux Device Driver development
• Strong experience with Linux kernel programming & memory management
• Experience with Zephyr OS / device driver model (porting bare-metal drivers).
• Familiarity with RTOS linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).
• Strong knowledge of PCIe and DMA drivers
• Proficiency in C / C++ programming languages
• Experience working with hardware interfaces/protocols (AXI, I2C, SPI)

REQUIRED SKILLS:

• Proven experience in developing Linux Device Drivers.
• Preferred experience in Zephyr (need to port bare metal drivers to zephyr OS/device driver model).
• Strong knowledge of PCIe and DMA drivers (Good to know Xilinx's IPs like AXI-DMA, XDMA etc).
• Expertise in Linux Memory Management.
• Proficiency in C/C++ programming languages.
• Preferred familiarity with real-time operating systems (RTOS), linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).

Immediate to 15 days joiners are preferrable we need to close it asap.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Benefits of choosing us…

• Growth Opportunites (Our first priority is a team) 
• Paid Overtime (125%), Incentive, Bonus & Gift Provision
• Very Flexible & Friendly work environments
• Work-life balance (taking leave, office timing, *working from home)
• Growth Opportunites (Seriously, We believe in WIN-WIN)
• Months last week (Restaurant, Movies, Fun Activities)

OmnixOne is a Research and Development company, our vision is to create a world free of resource scarcity, so people can have more time for innovation/big things instead of fighting daily life problems. Wanna be part of this great journey, Come with us!

Prerequisites

• We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
• Behavioral Attitude: Must be a Quick learner / Highly Dedicated / Responsible person

Require Person: 5

Job Type: Full-time

Office Timing: 9:30 to 6:30

Expected Start Date: ASAP

Fresher Salary: 3,000 to 15,000

Experience Salary: 10,000 to 45,000

Location: Must be from Surat, Gujarat

Below are the skills we are looking for in a candidate.

• Strong hands-on C/C++, Embedded System Development 
• Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
• Good to have Python, Shell/Bash Scripting, Toolchains
• SPI, I2C, UART, RS485, CAN, and hardware subsystems
• Hardware and IoT / IT Communication protocols knowledge
• Problem-solving and analytical skills.
• Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
• Schematic / PCB Designing verification
• Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
• Design, develop, code, test, and debug system software.

We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controllers. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.

Thanks and Best Regards

Positions are open for PhDs/Master/Bachelors/Diploma candidates.

Develop firmware, system software for medical devices\ Automotive ECUs\ IoT edge devices & gateways.  Implement the logic and protocols and communications on 32-bit microcontrollers, configure OS, timers, tasks, interrupts, and communicate with external modems, SoCs, trans-receivers to design, code, and test desired functionality as per customer requirements

Job Requirements :

• Hands-on experience in firmware development using C language
• Hands-on experience in writing low-level device drivers for microcontrollers
• Know of real-time Operating system concepts, tasks, and interrupts’ configuration
• Hands-on experience with in-circuit debuggers
• Knowhow of wired and wireless communication protocols 
• Basic understanding of HW circuits, power supply designs, sensors, and actuators’ interfaces
• Experience in implementing SW development quality processes like ISO 9001 or ASPICE
• Good written and oral communication skills

Must have Skilled and Should Currently have Hand-on experience:

• Programming Language:          C, C++
• Operating System:                   Linux
• Debugging Tools:                     Valgrind / GDB - required
• Version Control:                       (Stash- nice to have) & (Git – Required)
• Build and Deployment:             Bamboo – nice to have
• Operating System:                     Linux
• Experience:                               5 to 8 years (Min. 4 years)

• Would be working on Development and Production Support of Email Mx Product which uses email protocols  (POP, IMAP, and SMTP) developed on C, C++ technology on Linux Platform.
• Technologies they get to learn: C, C++, GDB, Valgrind, python (python to a certain extent).
• Protocols they get to learn:   POP, IMAP, and SMTP and also any and every communication happening in Email Platform
• Source Control:                 Git, Stash
• Build and Deployment:           Bamboo
• Operating System:               Linux

• Debugging a Multicomponent – Multi-Threaded – Multi-Server Environment of a Live Product Deployed to Tier – 1 Customer.
• Opportunity for Improving CPU of exiting product.
• Opportunity for Memory optimization along with some good

Software Engineer(Layer 2/Layer 3)

Location : Gurgaon (WFH currently)

Experience/ Skills Required : 5 to 10 years

To be successful in this role you should be well versed with the concepts of networking and comfortable in C programming in a linux environment for embedded software. As we use Linux, experience with this operating system is a mandatory requirement, knowledge and experience on OpenWrt is a bonus.  Working experience with router software development for layer 3 and layer 4 features.

Domain knowledge required: IPv4, TCP/UDP, IPv6, NAT, Firewall (iptables), DHCPv4, DHCPv6, IPv6 prefix delegation, Port forwarding, Source based routing, Policy based routing, L3 QoS, IGMP proxy, IPv6 MLD snooping, DNS, DNS proxy. Knowledge on VoIP is a bonus. 

Management methods: TR069, SNMPv2, CLI.    

Operating system: Linux, OpenWrt  

Programming languages: C(must have), Python 

Working for us means having a healthy interest in Software but most of all, you like to work in a team. You like to take initiative and have the “just do it” approach. Having the right mentality and attitude are more important for us than a degree. Dedication, investigation and responsibility are keywords for us.   Preferred years of experience in industry/technology: 5-10 years.   

Role:

As a Software Engineer you develop new software features and solutions for our fibre connectivity product portfolio. The position offers a wide range of possibilities to work with everything from low-level Linux drivers to high-level applications. You develop for various protocols and HW interfaces, often in complex network scenarios in combination with customer specific requirements. The team is responsible for all SW development for existing and new Home Gateways. This means development of Linux drivers, network functionality, remote Management (TR-069) and VoIP application (sipapp). The development is mainly done in C and in Linux environment, knowledge in Python is an add-on. Products and development are realized in Agile.