Senior Service Engineer- Commissioning at Engineering Industry · Mumbai · 5 - 8 years · ₹6L - ₹13L / yr · Posted 14 Dec 2025
Senior Service Engineer- Commissioning
JOB SUMMARY
Commissioning of IPMS system at Project Sites (Shipyards) by conducting successful Harbour and Sea Acceptance tests. Facilitate handover of system to customer after successful commissioning. Daily reporting to Project Manager to plan day to day/weekly commissioning activities. Report issues if any to Engineering and implement suggested resolution. Support Customer Documentation preparation activity. Create "Lessons Learnt" while commissioning to support Knowledge Management. Impart basic hands on training to customer to operate / maintain the IPMS if called for.
JOB PROFILE
DEPARTMENT-Commissioning
JOB TITLE- Senior Service Engineer Commissioning
REPORTING TO-Site Manager / Project Manager
BASED
Navi Mumbai (involves extensive travelling to overseas/domestic sites)
JOB PURPOSE
Responsible for the testing and commissioning of Alarm & Monitoring Systems, and Integrated Platform Management Systems (IPMS) either at customer’s premises or at shipyards worldwide.
KEY RESPONSIBILITIES
· Commissioning and final handover of IPMS project sites in line with project timelines
· Responsible for time, quality, scope, and site expenses
· Installation support, Commissioning and troubleshooting of IPMS hardware.
· Facilitate / Perform / drive Harbour Acceptance Test / Sea Trials in accordance to defined Documented Test Procedures
· Change management (Engineering) at site
· Stakeholder communication and management (internal – Operations, Engineering teams, HSE and other functions | External – Customer and Third-Party equipment suppliers at site)
· Site Issue tracking and Management reporting
· Documenting Lessons Learnt at site - Process adherence and suggest/implement improvements to take care of lessons learnt
QUALIFICATIONS & EXPERIENCE
Degree / Diploma in either Electronic Engineering or Electrical & Electronics Engineering, ideally with a minimum of 5 years’ experience in a relevant control and automation industry
Essential Skills & Experience
In depth knowledge of:
o PLC and Scada based software packages and environment
o Analogue / digital monitoring and control systems and associated I/O hardware.
o Interfacing to third party equipment with serial communications
o Sensors and sensor technology.
o Structured programming languages.
o P&ID drawings
· Competent in computer technology and Ethernet networks.
· Prepared for extensive worldwide travel to any country for extended periods
· Prepared to work on site aboard a variety of marine vessels, afloat and in shipyards.
· Ability to work well within a team whilst at the same time demonstrating initiative and the ability to work without supervision
· Experience of ship and marine systems e.g. power and propulsion control, chart systems, radar or communications, is a distinct advantage.
· Excellent interpersonal skills – able to communicate well (via email and telephone) with customers.
· Solid problem solving, decision making and analytical capabilities.
· Good planning & organizing skills
· Desirable Skills & Experience
· Competent in computer technology and Ethernet network experience.
· Experience of industrial communication protocols e.g. Modbus, Canbus & Profibus.
· Experience of PLC programming using IEC 61131-3 programming languages
· Experience of Allen Bradley, Mitsubishi and Wago PLCs etc
· Marine experience of ship systems including automation, power, propulsion, navigation and communications
· Focus and thoroughness
· The capacity to be influential and amenable
· Professionalism and cordiality
· The capacity to adequately handle work stress
· The capacity to meet deadlines
· Solid problem solving, decision making and analytical capabilities
· Ensuring Safe working condition and safety at site
Must-Haves
QUALIFICATIONS & EXPERIENCE
Degree / Diploma in either Electronic Engineering or Electrical & Electronics Engineering, ideally with a minimum of 5 years’ experience in a relevant control and automation industry
Essential Skills & Experience
Must have skills
• Onsite commissioning
• PLC, SCADA
• Marine domain
Nice to Haves
Good to have skills
• IPMS
• VME
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs (3)
Job Role: Technical Service Engineer.
Type: Permanent/Fulltime
Location: Hyderabad/Bengaluru/Chennai
Requirement: Immediate joining.
Job Description:
Key Responsibilities
· Installation & Commissioning: Set up printers, MFP’s, POS (Point of Sale) machine, IP and analog cameras, DVRs/NVRs, wire low-voltage circuits, install control panels, motion sensors, and electronic locking hardware and associated hardware (mounts, housing, and power supplies) at project sites.
· Network Integration: Configure printers, MFP’s, POS (Point of Sale) machine, IP addressing, Connect IP cameras to networks, configure PoE switches, routing, switching, port forwarding, and remote access setups so clients can monitor feeds off-site.
· Testing & Troubleshooting: Conduct system health checks, diagnose connectivity or hardware failures, and repair/replace faulty cables, cartridge, cameras, servers or backup batteries.
· Cabling & Infrastructure: Lay and terminate CAT6, fiber optics, and power cables according to industry safety standards.
· Preventive Maintenance: Conduct scheduled service visits to clean equipment, test alarm triggers, and perform software updates.
· Client Support & Training: Understand customer needs, conduct site surveys, and train end-users on how to operate security panels, mobile applications, and monitoring systems, back up, and retrieve footage.
· Documentation: Maintain accurate service logs, test results, and as-built drawings for site handovers.
Core Requirements
· Education: ITI, Diploma, B.E., or B.Tech. in Electronics, Electrical, or IT Engineering or any bachelor degree.
· Experience: Min. 6 months of experience in security surveillance and fire safety systems, printer service, POS( Point of Sale) machine service or as network engineer in relevant field.
· Technical Skills: Deep understanding of TCP/IP, DNS, DHCP, CCTV software (VMS), and hardware components.
· Knowledge of Brands: Familiarity with industry-leading surveillance and ELV (Extra Low Voltage) systems like Hikvision, Dahua, Bosch, and Honeywell.
· Soft Skills: Strong problem-solving abilities and clear customer communication.
· Physical & Environmental Aptitude: Ability to work comfortably at heights, in varying weather, and across multiple physical client sites and a valid driver's license for field travel.
ROLE SUMMARY:
An experienced, hands-on engineering role owning the electrical and electronics hardware content of motor-drive and sensor systems. The Electrical / Electronics / Instrumentation Engineer is responsible for power distribution and motor-drive power-stage design, sensor interface boards, and taking boards through EMI/EMC compliance, with full ownership of schematic capture and layout from concept to fab-ready.
RESPONSIBILITIES:
- Design power distribution and the motor-drive power stage (gate drives, current sense, H-bridge/inverter stages)
- Implement supervised discrete-line circuitry per IF-08 ICD requirements
- Design sensor interface boards (resolver, encoder, analog/digital signal conditioning)
- Take boards through EMI/EMC compliance for MIL-STD-461
- Own schematic capture and layout in Altium or KiCad end-to-end, from concept to fab ready.
REQUIRED QUALIFICATIONS
- B.E./B.Tech/M.E./M.Tech. in Electrical, Electronics & Communication, Electronics & Instrumentation, or any other relevant field.
- 4-8 years of relevant experience.
KEY COMPETENCIES
- Hands-on power electronics: gate driver design, current sensing, protection circuitry
- Analog signal conditioning for sensor front-ends (resolver, encoder, LVDT-class signals)
- Practical EMI/EMC design experience, ideally against MIL-STD-461 or equivalent (automotive/industrial EMC also considered)
- Strong Altium or KiCad skills — layout discipline for power + mixed-signal boards.
- Prior work on ICD-driven or interface-controlled discrete I/O circuitry
- Defence, aerospace, or automotive electronics background
PythonDear Candidate,
Greeting from NAM Info Pvt Ltd.
We have a role for Camstar (Siemens Opcenter) position with NAM Info.
This role will be permanent with NAM info and deploy to client location BANGALORE~PUNE~HYDERABAD.
Work Mode: WORK FROM OFFICE
Notice Period: Immediate to 15 days Max
A decent hike can be provided based on current CTC
Role Descriptions:
Exp Range: 2 – 4 years
Key Responsibilities*
Forgerock Identity Management Role Descriptions: Strong hands-on experience with Ignition SCADA (Vision andor Perspective) Proficiency in Python scripting (Jython) Experience with SQL and relational databases Knowledge of industrial communication protocols (OPC UA| Modbus| EthernetIP) Understanding of SCADA| HMI| MES concepts Experience integrating with PLCs and industrial devices
Essential Skills: Camstar siemens
Desire candidate
- Candidate should have valid PF.
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon