11+ LF Jobs in India

Key Responsibilities:

1.    Development, integration and testing of embedded software in the Embedded Linux RTOS

2.    Integrate Application based on Adaptive AUTOSAR Platform

3.    Contribute for Architecture, Detailed design, programming in C++ (11/14/17)

4.    Perform Unit, Integration Tests of developed Application

5.    Detail oriented systematic problem-solving approach in the embedded software.

6.    Debug embedded software on hardware platforms for issue identification and resolution

Minimum qualification criteria:

1.    Bachelor's degree in Electronics, Computer Science, Electrical Engineering, or related field

2.    2+ years of experience in software development in C or C++

3.    2+ years of experience in designing and implementing embedded systems for high performance, high reliability real-time embedded computing platforms

About Us

We are a fast-growing deep-tech startup building next-generation embedded products from the ground up. We move fast, prototype aggressively, and take ideas from whiteboard to production.

If you enjoy solving real-world hardware challenges, writing tight firmware, bringing up boards, and seeing your design go into mass production, you’ll love it here.

Key Responsibilities

• Design and develop embedded hardware systems based on microcontrollers and SoCs
• Develop, test, and optimize embedded firmware in C/C++
• Perform schematic design, component selection, PCB review, and board bring-up
• Develop low-level drivers for peripherals (UART, SPI, I2C, CAN, USB, Ethernet, etc.)
• Debug hardware/firmware issues using oscilloscopes, logic analyzers, and debuggers
• Collaborate with cross-functional teams (mechanical, testing, manufacturing)
• Support product validation, compliance testing, and production release
• Prepare technical documentation and design reports
• Collaborate directly with founders and product teams
• Take products from prototype to manufacturing

You won’t just “contribute.” You’ll own modules and ship products.

Required Skills & Qualifications

• 4–8 years of hands-on experience in embedded systems
• Strong embedded C/C++ skills
• Experience with microprocessors/microcontrollers, SOCs’
• Experience in power supply designs, analog and digital interfaces.
• Experience in schematic design & PCB review
• Strong debugging skills using oscilloscopes, logic analyzers, and JTAG
• Deep understanding of communication protocols (SPI, I2C, UART, CAN, Bluetooth, WiFi, etc.)

You should be comfortable moving between hardware and firmware without hesitation.

Good to Have (But Not Mandatory)

• FPGA development (Verilog/VHDL)
• Experience with Xilinx/Intel FPGA tools
• High-speed digital design exposure
• Embedded Linux experience
• EMI/EMC awareness

Educational Qualification

• B.E./B.Tech/M.E./M.Tech in Electronics, Electrical, and Embedded Systems.

Who Will Thrive Here

• Builders who like solving messy real-world problems
• Engineers who take ownership instead of waiting for instructions
• People who enjoy fast iterations and tight deadlines
• Those who prefer impact over hierarchy

Why Join Us

• Work on cutting-edge embedded products
• High ownership & decision-making power
• Fast learning curve
• Direct impact on product architecture

Min 4 Years Experience in Embbeded domain

1. C++

2. C++ ★ Profinet ProfiSAFE ★ Embedded RTOS

3. rtos c c++ python ★ Industrial protocols Embedded Security Threat Modeling ★ Embedded C Embedded Linux

4. Embedded Systems ★ Embedded C ★ C++ ★ RTOS

Role and Responsibility:

 Developing firmware for robust embedded system devices

 Active involvement in designing architecture, communication protocols & selection of technology.

 Designing test cases and active participation in testing

 Team building and grooming new members.

Candidate Skill Set:

 Thorough knowledge and hands on experience of Embedded C programming.

 Experience of firmware development on multiple microcontroller families like AVR, MSP430, STM32,

Renesas, etc.

 Strong programming & debugging skills.

 Knowledge of IDE’s like Keil, AVR Studio, IAR, Cubesuit will be an added advantage.

 Hands on experience of working on wireless communication (BLE, Wi-Fi, Zigbee, LoRa, GSM/ GPRS)

Qualification:

 A team player with excellent analytical, problem-solving skills, with strong ability to quickly learn.

 Passion for developing products with new technologies.

 Bachelor's/ master’s degree in electronics related discipline or equivalent experience

 Experience of 1-3 years

● Write Effective Codes In C++, Develop Software For Embedded Systems Based On STM32, NRF
● Support And Improve Existing Software
● Prepare Documentation For The Created Software. Qualifications
● Confident Knowledge Of C++ 17, Object-Oriented Programming, Embedded Software Development
● Proficiency With Microcontrollers Of The STM32 And / Or NRF Series
● Experience With RTOS
● Familiarity With Git, Linux
● Technical English
● Knowledge Of Python As An Advantage
● Any Experience With UAS \ UAV \ Drones is much appreciated

• Design, implement, and test production- grade core robotic software components possibly  including perception systems, motion planning systems, or command and control systems. • Design, implement, and test software integration components with other robotic platforms and  warehouse management systems 
• Design, implement, and test customer- specific software components 
• Develop testing frameworks and support testing for core software components • Develop logging and data analytics systems for deployments 
• Follow production- level code design and development processes including detailed  documentation, code reviews, and structured release processes

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

Greetings from Utthunga Technologies!!!

Job Description:

• Ability to contribute as an independent developer
• Boot-Loader: Proficient in customization in u-boot for custom hardware
• Hands on experience with Cortex M series based architecture
• Linux Kernel: proficient in Linux device driver development and BSP development in YOCTO environment
• Programming language: Strong in C, particularly system software development
• Sound knowledge and experience of Linux OS and OS configurations
• Sound knowledge/ understanding on ARM architecture
• Strong Embedded Software background and Linux internals
• Experience of Designing and Architecture for Application and Middleware Development.

• Become a member of the team responsible for IoT hub software development. IoT hub provides IoT functionality (smart home, smart appliance,…) to mobile and web clients and runs on Linux-based host like smart home hub, broadband router, STB, etc.
• Implementation and/or extension of leading wireless/wired protocols (ZigBee, Bluetooth, IP-based,..) for communication with smart devices
• Development of new features for control and monitoring of smart devices and automation of IoT system
• IoT hub software porting on various hosts
• Software optimizations

Position:             C++ Developer

Location:            Hyderabad

Requirements:

• Strong C++ skills obtained in multiple years of C++ programming experience (at least 3 years)
• Good understanding of embedded system development based on Linux OS
• Knowledge of advanced programming concepts (e.g. Multi-Threading, OS internals, Networking, IPC mechanisms)
• Solid understanding of computer networking (TCP/UDP/MQTT/SSL)
• Solid understanding of Git source code management system
• Troubleshooting skills
• B.Tech/M.Tech/MCA in computer science/ECE/EEE
• Fluent English