6+ USB Jobs in India
Apply to 6+ USB Jobs on CutShort.io. Find your next job, effortlessly. Browse USB Jobs and apply today!
Job Title: Team Lead – Hardware Design Engineer (RF, Power Supply & High-Speed SOM)
Location: [Bangalore / Onsite]
Department: Hardware Design / Product Engineering
Job Summary:
We are seeking an experienced Team Lead – Hardware Design Engineer to lead the design, development, and validation of RF, power supply, and high-speed SOM-based electronic hardware for IoT and communication products.
The ideal candidate will have hands-on expertise in RF circuit design, mixed-signal board design, high-speed SOM integration, and power management systems, along with strong leadership and project management skills.
You will drive hardware architecture decisions, guide design engineers, and collaborate closely with firmware, mechanical, and manufacturing teams to deliver high-quality, production-ready hardware designs.
Key Responsibilities:
1. Hardware Architecture & Design Leadership
- Lead the end-to-end design and development of embedded hardware systems, including RF, analog, digital, and power circuits.
- Define hardware architecture, component selection, and schematic design for SOM-based systems (e.g., i.MX, Sitara, STM32MP, or similar).
- Review and guide PCB layout design with emphasis on signal integrity, EMI/EMC, thermal, and mechanical constraints.
- Architect RF front-end designs (sub-GHz / 2.4 GHz) including PA/LNA matching, filters, and antennas.
- Design and validate DC-DC converters, LDOs, and power sequencing circuits for embedded and RF systems.
- Product reliability, HALT and environmental testing to design robust products
2. Technical Oversight & Team Management
- Mentor and manage a team of hardware design engineers and layout designers.
- Assign tasks, review design outputs, and ensure adherence to project timelines and design standards.
- Conduct design and peer reviews, ensuring reliability, manufacturability, and compliance with standards.
- Collaborate with firmware, mechanical, and test teams for system integration and bring-up.
3. Testing & Validation
- Oversee hardware validation, including power, signal integrity, and RF performance testing.
- Work with lab equipment (oscilloscopes, spectrum analyzers, VNAs, signal generators) for validation and debugging.
- Drive design optimization for performance, power efficiency, and cost.
- Support EMI/EMC testing, pre-certification, and compliance processes (CE, FCC, BIS, etc.).
4. Production & Lifecycle Support
- Work with manufacturing teams for DFM/DFT and prototype-to-production transition.
- Support root-cause analysis and field issue resolution for deployed hardware.
- Maintain detailed documentation of schematics, BOMs, test reports, and design revisions.
Qualifications & Skills:
- Bachelor’s / Master’s degree in Electronics, Electrical, or Communication Engineering.
- 8–12 years of experience in hardware design, with at least 2–3 years in a team leadership role.
- Strong technical expertise in:
- RF design (sub-GHz, 2.4 GHz, impedance matching, antenna tuning, PA/LNA integration).
- Power electronics (DC-DC converters, LDOs, PMICs, protection circuits).
- High-speed board design (DDR, USB, Ethernet, MIPI, PCIe).
- SOM-based system integration (NXP, TI, or similar modules).
- Proficiency in schematic and layout tools (Altium Designer, Cadence Allegro, or OrCAD).
- Delivered 3-4 product designs from proto to mass manufacturing
- Experience in signal integrity and simulation tools (HyperLynx, ADS, ANSYS, etc.).
- Familiarity with testing instruments and hands-on experience in hardware bring-up and debugging.
- Strong understanding of DFM/DFT, EMI/EMC design practices, and regulatory compliance.
- Excellent communication, leadership, and cross-functional collaboration skills.
Preferred Attributes:
- Experience in IoT, Smart Metering, or Communication Product hardware.
- Exposure to Wi-SUN, LoRa, BLE, or Cellular RF front-end design.
- Experience with low-power and battery-based system design.
- Knowledge of reliability testing, environmental validation, and hardware qualification.
- Prior experience working in startup or agile product development environments.
Why Join Us:
- Lead hardware innovation for next-generation IoT and communication platforms.
- Opportunity to own complete hardware development cycles — from concept to field deployment.
- Collaborative, fast-paced engineering environment that values creativity and technical excellence.
- Growth path to Hardware Architect / Head of Hardware Engineering roles.
CPlease go through with the below mentioned job description
Position title: Firmware Engineer
Experience: 6-12 years
Notice Period: 0-30 days
Location: Bangalore(Sarjapur)
Role type: Permanent
About the role
Experience in Firmware/Software programming in embedded Linux & RTOS based application development. Candidate must have a very good understanding of ARM processor, hardware and custom board or product development experience.
Roles and Responsibilities:
Design, code and integrate software for an embedded Linux/RTOS targeted application(applications, drivers, framework)
Customization, deployment and maintenance of Linux distribution
Interact with Linux kernel, integrate new device drivers Improvement and maintain existing software components
Perform unit test, Integration test, verification and validation of the product developed.
Assist with the hardware design surrounding the processor
Document the projects according to standards (protocols, architecture, technical specifications, etc.)
Specific skills:
Expert in C programming with RTOS.
Hands-On experience with Protocol development.
Nice to have Protocol development experience such as USB or DP, HDMI or equivalent.
System level design and understanding of overall system
Strong knowledge of Linux, ARM processor architecture with SOC, FPGA interface is a plus.
Hand-on experience on Linux kernel and device-driver development and debugging.
Knowledge/Experience of TCP/IP, Network programming.
Ability to write effective and reusable code according to best practices.
Must be a dynamic, autonomous, and team-oriented individual.
Knowledge of hardware and low-level development is an asset
Please provide below mention details:
No. of years of working experience in Embedded Linux -
Protocol stack development Exp, any specific protocol worked on -
Relevant Experience:
Official Notice Period 30/60/90 Days:
Date of Resignation:
Serving Notice Period and Last Working Day:
Current Company:
Current Location:
Work Location:
Current CTC(fixed,variable):
Expected CTC(fixed,variable):
Interview Availability:
Any Offer:
Relocate to Bangalore(Sarjapur):
company name
company location
date of joining
Job Description for the above position:
➢ 2 to 4 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Knowledge of Product Development life cycle.
➢ Experience in High-level design, low-level design and test plan document preparation.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Excellent knowledge of basic electronics components and its usage.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb/40Gb/100Gb and above Ethernet and USB2.0/3.0.
This is a must requirement.
➢ Familiarity and good knowledge of test equipment like Oscilloscope, Logic analyzer etc...
➢ Experience in a range of technologies including digital, analog and power electronics
➢ Familiarity with OrCAD for schematic capture, Allegro/Altium Designer for PCB artwork design and Gerber viewers.
➢ The ability to work with software engineers to design and debug systems
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Strong knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication and assembly processes.
➢ Experience with PCB layout design tools like Allegro and Altium Designer.
➢ Strong knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE video standards a plus.
➢ Strong knowledge and working experience of MS Office applications, Word, Excel, and Visio.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person Specification/Competencies
➢ Having a positive attitude.
➢ Being Coachable
➢ Self-motivated
➢ Being passionate to work in a challenging environment
At BrainAlive, we develop next-generation BCI technologies that transform how humans use biosignals. We build devices and systems that allow you to develop a crisp, conscious understanding of your physiology, especially relating to your cognitive and emotional abilities. With a mission is to become the innovation leader in the area of Brain-Computer Interface (BCI), we are building our reputation as the industrial powerhouse in BCI applications in the education and healthcare space.
Role - Embedded Firmware Engineer – II (Brain-Computer Interface)
As an Embedded Firmware Engineer at BrainAlive, you will have the opportunity to pioneer, develop and build out our footprint in consumer hardware. You will build and launch smart BCI wearables and other related products in line with BrainAlive's ambitious and visionary objectives. Your primary focus will be to enhance the efficiency, stability and scalability of hardware system resources. We need you to be versatile, display leadership qualities and be enthusiastic to take on new problems as we continue to push technology forward.
- Develop codes for utilising various hardware and capabilities built into a microcontroller, such as ADCs, timers, RTCs, power-saving and sleep modes, etc
- Perform debugging and provide technical support to the service team
- Participate in requirements analysis and collaborate with internal teams to produce firmware design and architecture
- Revise, update, refactor and debug code
- Drive peer reviews and peer testing across different modules developed
- Develop documentation throughout the product development life cycle
- Serve as an expert on applications and provide technical support
Required Qualification
- Bachelor Degree in Electronics / Electrical Engineering or Computer Science or related field
- 3+ years of experience in Microcontroller programming
- Experience in developing codes for the effective functioning of communication protocols such as UART, SPI, I2C, etc.
- Experience with hardware debugging tools and interface like JTAG, SWD
- Experience with BLE and USB protocols
- Highly experienced in developing and debugging in embedded C/C++, RTOS
- Product development experience with 32-Bit STM ARM Microcontroller Architectures
- Familiarity with source control management software (SVN, Git)
Preferred Qualification
- Experience at handling huge codebases and designing of multi-layered architectures
- Experience in optimisation of Microcontroller codes for specific goals like power efficiency, very low response times, memory space optimisations.
- Deep understanding of microcontroller's architecture and its working
- Experience in prototype bring-up and debugging, functional verification and manufacturing support
- Prior Brain-Computer Interface Device development experience
- Excellent troubleshooting and communication skills
Primary skills:
At least 3+ years of working experience on embedded firmware development
- Experience in multithreaded programming, network programming (wired and wireless protocols), real-time programming, cross-platform and cross-language development
- Hands-on experience on driver development for various sensors
- Working knowledge of communication protocols like UART, I2C, SPI, USB, Ethernet, etc
- Product development experience with range of microcontroller/microprocessor architectures, adoption of bare-metal, RTOS and Linux operating systems on new platforms
-Hands-on experience on software development in Bluetooth domain is added advantage
- Experience with hardware lab equipment such as digital scope, logic analyser and JTAG
- Understanding of embedded development constraints and system performance
- Experience with programming in C/C++ and Embedded C
- Degree : B.E. or M.S. EE/CS/CE
- Methodologies: SV, UVM & OVM
- Areas of Work: Digital Verification (both IP / SOC)
- Protocol : Knowledge of PCIe/DDR/Ethernet/USB is Plus
- Familiar with Bus protocols like AXI, AHB, SPI and I2C
Follow Cutshort