11+ Power station Jobs in Hyderabad | Power station Job openings in Hyderabad

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination

Criteria:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

Description

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycle.

• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.

• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.

• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.

• Completed at least two project from high-level design to final product level deployment.

• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.

• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.

• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.

• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.

• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.

• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.

• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.

• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Education Requirements: 

B. Tech / M. Tech (ECE/ CSE/ IT)

Experience - 10 to 12 Years

Education : B.Tech / M.Tech only

MANDATORY CRITERIA:

• It's a Contractual role for a particular project ongoing in the company, duration will be 1 year or may exceed as per the project requirement, After that the candidate will be kept on permanent role.
• The candidate will be on company's payroll only.
• Candidate should be comfortable for directly visiting and working with client's place.
• Immediate to 15 days joiner preferred
• 3 to 5 years of hands-on experience in Linux Device Driver development
• Strong experience with Linux kernel programming & memory management
• Experience with Zephyr OS / device driver model (porting bare-metal drivers).
• Familiarity with RTOS linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).
• Strong knowledge of PCIe and DMA drivers
• Proficiency in C / C++ programming languages
• Experience working with hardware interfaces/protocols (AXI, I2C, SPI)

REQUIRED SKILLS:

• Proven experience in developing Linux Device Drivers.
• Preferred experience in Zephyr (need to port bare metal drivers to zephyr OS/device driver model).
• Strong knowledge of PCIe and DMA drivers (Good to know Xilinx's IPs like AXI-DMA, XDMA etc).
• Expertise in Linux Memory Management.
• Proficiency in C/C++ programming languages.
• Preferred familiarity with real-time operating systems (RTOS), linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).

Immediate to 15 days joiners are preferrable we need to close it asap.

1. Coding and Debugging in C language.
2. Knowledge on ARM based architectures of 8/16/32 Microcontrollers,UART, ADC, DAC,Ethernet, SPI,CAN,I2C and I2S.
3. FPGA RTL coding and Simulation using Verilog/VHDL

Qualification - BE/B.Tech (ECE), M.Sc.(Electronics)

Only Defense and Aerospace, Electronics, Semi-Conductors,

(No Automative industry)

AVANTEL LIMITED is a technology driven public limited company with focus on developing innovative wireless communication products and solutions to meet unique requirements of defense, railways, and telecom sectors. The organization is certified against AS 9100D and ISO 9001:2015 standards for Quality Management System. For more details visit www.avantel.in.

Automotive Embedded Developer

Experience: 3-8 Years
Location: Bangalore, Hyderabad, Chennai, Pune, Thiruvananthapuram, Calicut
Company: Tata Elxsi

Skills : Embedded C, CAN Protocol, Vector Tools, Aspice. Design and Development of ECU 

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Duration:Fulltime
Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

We have a very urgent requirement with our client, please go through the job details and if interested do send us your updated resume and feel free to reach me.

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Fulltime

Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

• Become a member of the team responsible for IoT hub software development. IoT hub provides IoT functionality (smart home, smart appliance,…) to mobile and web clients and runs on Linux-based host like smart home hub, broadband router, STB, etc.
• Implementation and/or extension of leading wireless/wired protocols (ZigBee, Bluetooth, IP-based,..) for communication with smart devices
• Development of new features for control and monitoring of smart devices and automation of IoT system
• IoT hub software porting on various hosts
• Software optimizations

Position:             C++ Developer

Location:            Hyderabad

Requirements:

• Strong C++ skills obtained in multiple years of C++ programming experience (at least 3 years)
• Good understanding of embedded system development based on Linux OS
• Knowledge of advanced programming concepts (e.g. Multi-Threading, OS internals, Networking, IPC mechanisms)
• Solid understanding of computer networking (TCP/UDP/MQTT/SSL)
• Solid understanding of Git source code management system
• Troubleshooting skills
• B.Tech/M.Tech/MCA in computer science/ECE/EEE
• Fluent English