11+ Power station Jobs in India

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Position: Application Software Development MBD Engineer – Motor Control Unit

Location: Bangalore

Employment Type: Contract

Experience: 4–6 Years

Industry Preference: Automotive

Reporting To: Manager – MCU Software Development

Educational Qualification: B.Tech / M.Tech in Electrical Engineering or related discipline

About the Role  

We are looking for a skilled and motivated Application Software Development MBD Engineer with strong expertise in Motor Control Unit (MCU) software development and Model-Based Design (MBD). The candidate will be responsible for developing, simulating, and implementing motor control algorithms for automotive applications using MATLAB/Simulink-based development methodologies.

  Key Responsibilities  

• Develop application software using MATLAB Model-Based Development tools including MATLAB, Simulink, Stateflow, and Embedded Coder
• Design, develop, and validate motor control algorithms for:  Induction Motors,  Permanent Magnet Motors (SPM/IPM)
• Implement motor control techniques including:  Field Oriented Control (FOC),  Sensorless Control Strategies,  V/f Control Schemes
• Implement and optimize PWM techniques such as SPWM and SVPWM
• Develop and integrate application software for Micro Control Units using:  Infineon TriCore  processors,  Texas Instruments DSPs
• Work with development environments and tools including Eclipse-based tools, TASKING, and Code Composer Studio
• Support software debugging, simulation, testing, and validation activities for automotive embedded systems

Required Skills  

• Strong experience in MATLAB, Simulink, Stateflow, and Embedded Coder / Code Generation tools
• Experience in motor control and automotive embedded systems
• Good understanding of electric motor control systems and power electronics
• Experience with embedded C programming and real-time systems
• Hands-on experience with development tools such as Eclipse-based tools, TASKING, and Code Composer Studio
• Good debugging and problem-solving skills
• Understanding of automotive software development processes is an added advantage.

Education : B.Tech / M.Tech only

MANDATORY CRITERIA:

• It's a Contractual role for a particular project ongoing in the company, duration will be 1 year or may exceed as per the project requirement, After that the candidate will be kept on permanent role.
• The candidate will be on company's payroll only.
• Candidate should be comfortable for directly visiting and working with client's place.
• Immediate to 15 days joiner preferred
• 3 to 5 years of hands-on experience in Linux Device Driver development
• Strong experience with Linux kernel programming & memory management
• Experience with Zephyr OS / device driver model (porting bare-metal drivers).
• Familiarity with RTOS linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).
• Strong knowledge of PCIe and DMA drivers
• Proficiency in C / C++ programming languages
• Experience working with hardware interfaces/protocols (AXI, I2C, SPI)

REQUIRED SKILLS:

• Proven experience in developing Linux Device Drivers.
• Preferred experience in Zephyr (need to port bare metal drivers to zephyr OS/device driver model).
• Strong knowledge of PCIe and DMA drivers (Good to know Xilinx's IPs like AXI-DMA, XDMA etc).
• Expertise in Linux Memory Management.
• Proficiency in C/C++ programming languages.
• Preferred familiarity with real-time operating systems (RTOS), linux kernel internals and hardware protocols (They mainly use AXI protocol, i2c, spi).

Immediate to 15 days joiners are preferrable we need to close it asap.

Position: Senior Embedded Software Engineer – PCIe / Embedded Linux

Location: Bangalore (Preferred)

Experience: 7+ years

Night Shift

About the Role:

We are seeking a highly skilled Senior Embedded Engineer with strong expertise in Embedded Linux and PCIe protocol development. The ideal candidate will have deep technical knowledge of PCIe (Gen4 and above) and experience in developing and debugging embedded systems at both hardware and software levels. Exposure to AI/ML or accelerator-based systems will be considered a strong plus.

Key Responsibilities:

• Design, develop, and optimize embedded software on Linux and RTOS platforms.
• Implement and validate PCIe-based communication and device drivers (Gen4 minimum, Gen5/6 preferred).
• Work closely with hardware and system teams to debug low-level issues related to PCIe interfaces.
• Develop firmware and system-level software components for high-performance embedded platforms.
• Participate in board bring-up, performance optimization, and hardware/software integration.
• Contribute to system architecture discussions and design reviews.
• Document design, testing procedures, and performance analysis.

Core Skills Required:

• Embedded Linux development (mandatory).
• Deep understanding of PCIe protocols (Gen4 minimum; Gen5/6 preferred).
• Strong knowledge of low-level driver development, DMA, interrupts, and memory management.
• Experience with Embedded RTOS environments.
• Familiarity with hardware debugging tools (e.g., JTAG, logic analyzers, oscilloscopes).
• Proficiency in C/C++ and scripting (Python, Shell).
• Excellent problem-solving and debugging skills.

Preferred Skills (Good to Have):

• Exposure to AI/ML hardware accelerators or data processing units (DPUs).
• Understanding of SoC architecture and high-speed interconnects.
• Experience working with multi-core systems and performance tuning.

Education:

• Bachelor’s or Master’s degree in Computer Engineering, Electronics, or related field.

Role and Responsibility:

 Developing firmware for robust embedded system devices

 Active involvement in designing architecture, communication protocols & selection of technology.

 Designing test cases and active participation in testing

 Team building and grooming new members.

Candidate Skill Set:

 Thorough knowledge and hands on experience of Embedded C programming.

 Experience of firmware development on multiple microcontroller families like AVR, MSP430, STM32,

Renesas, etc.

 Strong programming & debugging skills.

 Knowledge of IDE’s like Keil, AVR Studio, IAR, Cubesuit will be an added advantage.

 Hands on experience of working on wireless communication (BLE, Wi-Fi, Zigbee, LoRa, GSM/ GPRS)

Qualification:

 A team player with excellent analytical, problem-solving skills, with strong ability to quickly learn.

 Passion for developing products with new technologies.

 Bachelor's/ master’s degree in electronics related discipline or equivalent experience

 Experience of 1-3 years

Omnitroncis is on a mission to bring robotics to real-life applications. We build & provide services for smart products. At the heart of each product is the amazing team which integrates software, hardware, sensors, AI, computer vision systems, machine learning models and robotics to orchestrate and automate the entirety of products and operations. As a result, we are able to lead better lives.

About Us:

This is an opportunity to join a growing team of electrical, mechanical and software engineers and make a substantial impact at Omnitronics. We are looking for someone that can learn, adapt and roll with a fast-paced, ever-changing environment and who isn’t afraid of uncertainty. Embedded engineering at Omnitronics involves developing electronics solutions that power a modern smart device. This involves unique industrial control systems, environmental sensor technology, data collection, computer vision systems, and automation. You ll be involved with idea generation, design, prototyping, planning, and the execution of firmware and hardware for our IoT devices.

Prerequisites

• We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
• Behavioural Attitude: Must be a Quick learner / Highly Dedicated / Responsible person

Require Person: 7

Job Type: Full-time

Office Timing: 10:00 am to 7:00 pm

Expected Start Date: ASAP

Fresher Salary: 3,000 to 15,000

Experience Salary: 10,000 to 45,000

Location: Must be from Surat, Gujarat

Below are the skills we are looking for in a candidate.

• Strong hands-on C/C++, Embedded System Development 
• Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
• Good to have Python, Shell/Bash Scripting, Toolchains
• SPI, I2C, UART, RS485, CAN, and hardware subsystems
• Hardware and IoT / IT Communication protocols knowledge
• Problem-solving and analytical skills.
• Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
• Schematic / PCB Designing verification
• Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
• Design, develop, code, test, and debug system software.

We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controller. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.

Thanks and Best Regards

What you need to have:

• Very strong knowledge in Embedded C including
• Data structures
• Function pointers
• Bitwise operations
• Experience with Finite State Machine (FSM) software design
• Required experience in AVR microcontrollers and projects to demonstrate it
• Familiarity with ARM 32 bit microcontrollers (Cortex M or any other)
• Required experience with common communication protocols like SPI, UART, I2C etc.
• Comfortable with reading datasheets and basic hardware schematics
• Comfortable with linux development environment including the use of GCC, gdb, makefile

Soft Skills

• Good communication skills
• Self-driven
• Passion for embedded engineering