PythonRequired Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination
Criteria:
- Education: B.Tech / M.Tech in ECE / CSE / IT
- Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
- Proven expertise in digital, analog, and power electronic circuit analysis & design
- Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
- Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
- Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
- Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
- Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
- Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
- Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
- Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
- Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
- Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components
Description
REQUIRED SKILLS:
• Extensive experience in hardware board designs and towards multiple product field deployment cycle.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.
Education Requirements:
B. Tech / M. Tech (ECE/ CSE/ IT)
Experience - 10 to 12 Years
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs
CPythonSenior BLE Firmware Software Engineer
About Company
https://espressif.com/">Espressif Systems (688018) is a public multinational, fabless semiconductor company established in 2008, with headquarters in Shanghai and offices in Greater China, India and Europe. We have a passionate team of engineers and scientists from all over the world, focused on developing cutting-edge WiFi-and-Bluetooth, low-power IoT solutions. We have created the popular ESP8266 and ESP32 series of chips, modules and development boards. By leveraging wireless computing, we provide green, versatile and cost-effective chipsets. We have always been committed to offering IoT solutions that are secure, robust and power-efficient. By open-sourcing our technology, we aim to enable developers to use Espressif’s technology globally and build smart connected devices. In July 2019, Espressif made its Initial Public Offering on the Sci-Tech Innovation Board (STAR) of the Shanghai Stock Exchange (SSE).
Espressif has opened a Technology Center in Pune (Baner), India, which will focus on embedded software engineering and IoT solutions development for our growing customers.
About the Role
Espressif is looking for Embedded Software Engineers to join the software department located in India. You will work in a diverse team where your colleagues are from Czech, Russia, India, Australia and so forth. Here, you get a chance to be a member of the core team in Espressif and work with talented engineers from all over the world.
The BLE Firmware Development Team is now focused on the development of the Bluetooth 5.x standard and BLE Mesh standard.
BLE FW Team is looking for a self-starting, high-technical, energetic individual with keen attention to details. The Candidate will be actively involved in:
- Development of Bluetooth Low Energy (BLE) Firmware for Espressif Bluetooth chips.
- Development of new firmware for BLE latest specification (BLE 5.x, BLE Mesh, etc).
- Development of BLE chip validation and Bluetooth Qualification.
- Research of cutting-edge and challenging Bluetooth technologies (BLE Audio, BLE Direction Finding, Next-Generation BLE Chip, etc).
- Supporting the existing firmware through feature additions, enhancements and maintenance.
- Working with systems team and cross-functional teams to deliver quality software following well-established software development processes.
- Resolving issues as reported by internal test teams as well as customers.
Requirements
Required skills
- Bachlor's degree or above in Electronic Engineering, Communications Engineering, Automation or other related majors
- Familiarity with Bluetooth Low Energy (BLE) protocol or BLE Mesh protocol
- Proven experience in developing BLE stack / firmware (2+ years, both BLE host and controller) or BLE Mesh stack (2+ years)
- Experience with software engineering processes and the full software development lifecycle including requirements, design, implementation, testing, and documenting in Continuous Integration environment
- Strong experience and proficiency in C programming (3+ years) for embedded platforms required
- Excellent problem solving and debugging skills
Bonus point
- Experience in developing BLE profiles and BLE applications (e.g. HID, ANCS, Homekit, etc)
- Good understanding of other networking protocol stacks is highly desired (e.g. Zigbee, IEEE 802.11, UWB, Lora, NB-IoT, etc)
- Strong Real-time systems and software engineering skills required (e.g. FreeRTOS, etc)
- One or more scripting languages (e.g. Python, etc)
- Experience with variety of software productivity tools (e.g. Git, Jira, etc)
What to expect from our interview process
- The first step is to email your resume or apply to the relevant open position, along with a sample of something you have worked on such as a public GitHub repo or side project etc.
- Next, post shortlisting your profile recruiter will get in touch with you via a mechanism that works for you e.g. via email, phone. This will be a short chat to learn more about your background and interests, to share more about the job and Espressif, and to answer any initial questions you have.
- Successful candidates will then be invited for 2 to 3 rounds of technical interview as per previous round feedback.
- Finally, Successful candidates will have interview with HR.
What you offer us
- Ability to provide technical solutions, support that fosters collaboration and innovation.
- Ability to balance a variety of technical needs and priorities according to Espressif’s growing needs.
What we offer
- An open minded, collaboration culture of enthusiastic technologist.
- Competitive salary
- 100% company paid medical/dental/vision/life coverage
- Frequent trainings by experienced colleagues and chances to take international trips, attend exhibitions, technical meetups and seminars.
Python
Amazon Web Services (AWS)What will you do?
- Oversees testing, deployment & maintenance of the Voice infrastructure.
- Performing a variety of tasks associated with user provisioning and call routing within the assigned platform
- Build loaders for internal systems ensuring tasks are completed accurately and in a timely manner
- Participate in meetings with clients and internal departments to understand the requirements of call routing
- Document and design call flow diagrams to ensure that all call variables have been accounted for in preparing a routing plan
- Support the clients solution by correcting any issues with call routing or provisioning during the initial implementation phase, constantly communicating status of any issues with client
- Complete testing to ensure that call flow is operating properly
- Monitors and ensures compliance to standards, policies, and procedures
What are we looking for?
- 0.6~2 year’s implementation experience in Asterisk PBX, IP Telephony, SIP.
- Able to thrive in a demanding and team-oriented environment
- Basic and strong knowledge of the Linux operating system.
- Knowledge of bash and perl shell scripting is an added advantage.
- RHCE Certification is an added advantage.
- Coding and Debugging in C language.
- Knowledge on ARM based architectures of 8/16/32 Microcontrollers,UART, ADC, DAC,Ethernet, SPI,CAN,I2C and I2S.
- FPGA RTL coding and Simulation using Verilog/VHDL
Qualification - BE/B.Tech (ECE), M.Sc.(Electronics)
Only Defense and Aerospace, Electronics, Semi-Conductors,
(No Automative industry)
AVANTEL LIMITED is a technology driven public limited company with focus on developing innovative wireless communication products and solutions to meet unique requirements of defense, railways, and telecom sectors. The organization is certified against AS 9100D and ISO 9001:2015 standards for Quality Management System. For more details visit www.avantel.in.
At BrainAlive, we develop next-generation BCI technologies that transform how humans use biosignals. We build devices and systems that allow you to develop a crisp, conscious understanding of your physiology, especially relating to your cognitive and emotional abilities. With a mission is to become the innovation leader in the area of Brain-Computer Interface (BCI), we are building our reputation as the industrial powerhouse in BCI applications in the education and healthcare space.
Role - Embedded Firmware Engineer – II (Brain-Computer Interface)
As an Embedded Firmware Engineer at BrainAlive, you will have the opportunity to pioneer, develop and build out our footprint in consumer hardware. You will build and launch smart BCI wearables and other related products in line with BrainAlive's ambitious and visionary objectives. Your primary focus will be to enhance the efficiency, stability and scalability of hardware system resources. We need you to be versatile, display leadership qualities and be enthusiastic to take on new problems as we continue to push technology forward.
- Develop codes for utilising various hardware and capabilities built into a microcontroller, such as ADCs, timers, RTCs, power-saving and sleep modes, etc
- Perform debugging and provide technical support to the service team
- Participate in requirements analysis and collaborate with internal teams to produce firmware design and architecture
- Revise, update, refactor and debug code
- Drive peer reviews and peer testing across different modules developed
- Develop documentation throughout the product development life cycle
- Serve as an expert on applications and provide technical support
Required Qualification
- Bachelor Degree in Electronics / Electrical Engineering or Computer Science or related field
- 3+ years of experience in Microcontroller programming
- Experience in developing codes for the effective functioning of communication protocols such as UART, SPI, I2C, etc.
- Experience with hardware debugging tools and interface like JTAG, SWD
- Experience with BLE and USB protocols
- Highly experienced in developing and debugging in embedded C/C++, RTOS
- Product development experience with 32-Bit STM ARM Microcontroller Architectures
- Familiarity with source control management software (SVN, Git)
Preferred Qualification
- Experience at handling huge codebases and designing of multi-layered architectures
- Experience in optimisation of Microcontroller codes for specific goals like power efficiency, very low response times, memory space optimisations.
- Deep understanding of microcontroller's architecture and its working
- Experience in prototype bring-up and debugging, functional verification and manufacturing support
- Prior Brain-Computer Interface Device development experience
- Excellent troubleshooting and communication skills
C++CSummary:
Hyperspec is building a real time local map for self-driving cars and using cross view localization to enable ubiquitous autonomy. Hyperspec is a VC funded startup.
The principal embedded systems engineer will have deep expertise in embedded systems design, development and worked for years on embedded systems teams. This person is a leader and mentor to junior engineers and shares knowledge about the design and development of embedded systems.
Responsibilities:
- Serves as an expert in all aspects of embedded projects and embedded systems—including designing, developing, testing, and perfecting designs
- Responsible for updating and working with executive leadership on the development of embedded systems and status of projects
- Provides guidance and mentoring to other members of the team
Requirements:
- Minimum of bachelors' degree in computer science or engineering
- At least ten years of engineering experience with expertise in software engineering, data structures, and programming techniques
- Deep expertise in C/C++ programming
- Experience with FPGAs, PCB, Xilinx, Altera, or similar SoCs.
- Experience with ISPs, Cameras, Switches a plus.
- Experience in working with real-time operating systems, communications protocols and firmware design.
- Experience in interfaces, IP protocols, and hardware subsystems.
- Experience in working as part of a team and leading teams.
C++CPlease find the Job Description for C/C++.
Mandatory Skills
-Must have experience and Good understanding about pointers & memory in C/C++
-Must have experience in Unix/Linux IPC (semaphore, shared memory, socket, multi thread)
-Must have Debug skills : gdb, coredump analysis, network packet analysis
-Must have experience in Source code syntax parser (Preferably lex, yacc, bison, etc.)
-Must have worked on build tools : Makefiles, make, etc.
-Database : Preferably Oracle Good at SQL and stored procedures
Optional Skills
-Telegram development using C/C++
-Finance/Industry domain knowledge
-Japanese speaking skills
- Responsibilities:Troubleshoot and report RCA, propose solutions(how to fix)
- Debug identified problems and provide fixes swiftly
- Ability to write clear and concise documentation
- To understand and maintain legacy codebase
- Individual contributor, but also works closely with junior developers
- Review source code developed by peers
- Proactive to suggest and implement improvements on current products
- Design and develop new features based on requirement document
Location-Bangalore
Please share your updated resume to proceed further.
Thanks & Regards
Shruti(Assistant Executive-HR)
Nichi-In Software Solution Pvt Ltd
URL:- www.nichi.com
Position: CCTV/Networking Engineer
Degree : Diploma, B.C.A, BTech
Experience : 1-4 years
Location: Bangalore
Skills : Networking, CCTV installation, Biometric Solutions, hardware troubleshooting skills.
Good communication skill.
Role:
1. Ability to communicate with field staff and guide them through troubleshooting and fixing the issues in CCTV system, CPU, WiFi and networking
2. Prepare status report onndaily basis and share with the client.
3. Communicate with the client and address the issues in timely manner
4. Promtly able to forsee the issues and take corrective actions.
5. Should be able to work with the installation team, planning team to improve the overall efficiency of the system.
6. Willingness to travel to the sites in field across India and address the issues will be positive
|
Role: Senior Firmware Engineer Experience: 2-6 years Work Mode: Work from Office Location: Hyderabad Notice Period: Immediate to 30 days Mandatory Skills: Embedded C Programming, Debugging, Configuration Management Budget Range: As per Market Standards · The ideal candidate is a self-motivated, multi-tasker, and demonstrated team-player. · You will be an individual contributor responsible for the development of new software products and enhancements to existing products. · You should excel in working with Application (ASW) and Base software (BSW) components and have outstanding communication and leadership skills.
· Understand & Review System Requirements, System Architecture · Participate in CFT Meetings for Requirements Clarity · Develop & Enhance Software Requirements · Develop & Enhance Software Architecture · Understand / Review / Change Software Design Documents · Writing clean, high-quality, high-performance, maintainable code · Participate in Software Code Reviews · Review Test Scenarios developed for SWE4, SWE5 and SWE6 · Perform Investigation and provide Root Cause Analysis for failures · Support test and deployment of new products and features
· Embedded C Programming · Excellent Debugging skills · 16-bit or 32-bit Micro Controllers · Ability to interpret circuit and schematics · Knowledge of CAN and LIN communication protocols and UDS diagnostics · Knowledge of Sensors, Motors, and Closed Loop Control · Knowledge of Memory and Timing Analysis · Experience in Configuration Management (SVN, IBM Rational, JIRA) · Experience in Debugging using CRO, Debuggers, CANalyzer / CANoe · Working knowledge of ISO 26262 Functional Safety requirements · Good exposure to End-to-End product development · Knowledge about Automotive Standards – ASPICE · Perform Safety Analysis and Impact Analysis based on ISO26262 recommendations · Exposure to CAPL, Python and LabView
|
Started in 2015, this lifestyle and accessories startup has taken over the consumer electronics sector in India. Our client has a product range that includes an extensive catalog of headphones, speakers, travel accessories, and modern earphones. It believes in providing cutting edge electronic products stamped with durability and affordability.
The brand is associated with some of the major icons across categories and tie-ups with industries covering fashion, sports, and music, of course. The founders are Marketing grads, with vast experience in the consumer lifestyle products and other major brands. With their vigorous efforts toward quality and marketing, they have been able to strike a chord with major E-commerce brands and even consumers.
- Developing drivers and middleware for mobile and wearable computing on cutting edge new hardware components.
- Optimizing constrained environments of low power mobile devices by writing excellent C/ C++ solutions.
- Collaborating with our business development team, providing support in customer communication and other additional service inquiries, sales leads and sales support.
- Designing new features / hardware introduction
- Implementing and testing software according to design
- Creating tools to automate processes
- Specifying requirements for new/legacy functionality
- Defining feature design and system architecture
- Supporting feature and maintenance teams
- Closely cooperating with development teams
- Closely cooperating with Product Technology Area members (Product Owners, Technical - Specialist, Architect, Subject Matter Experts)
What you need to have:
- BE – CS/ ECE, MS, ME, MTech
- Very Strong C/ C++ experience in an embedded environment
- Expertise in Python Framework
- Good working experience in Unix / Linux operating system
- Must have good knowledge of Bluetooth, BLE, Wi-Fi standards
- Candidates having experience in developing Hearables (TWS, Neckband, headphones) and IoT systems are preferred
- Good knowledge of SDLC,SQA
Flux Auto builds autonomous vehicle technology for commercial and industrial applications.
Responsibilities:
- Work on Embedded Software for deployment on the self-driving vehicle.
- Investigate, develop different system design and architecture for ADAS system.
- ROS version of Firmware package for multiple sensors with different communication protocols.
- Work on Serial communication (GMSL/CAN/LIN/FlexRay/Ethernet/UDP).
- Work on Multi threading and Data preprocessing.
Requirements:
- Experience in the fields of firmware development of Camera, Radar, Lidar, inertial sensors, Micro Controllers, ISP, Serdec.
- Candidate should have a strong background in Embedded system and Communication protocols.
- Candidate should have hands-on knowledge of data structures and algorithms for Data processing, and familiar with ROS (robot operating system)
- Candidate should have hands-on knowledge on Multiple sensors, Data pre processing (Clustering, noise removal, etc.) and image preprocessing (Histogram equalization, Tone mapping, etc. )
- Candidate should have real-world experience in implementing Firmware packages for multiple sensors and communication protocols
- Candidate should have experience in programming in C++ and with robust, safety-critical, efficient code
Additional requirement: Active U.S visa.
Good to Have:
- Domain knowledge and implementation experience with multiple sensor, inertial sensors, and general Embedded System Architecture
- Real world experience with system integration and deployment
- Worked on sensor fusion and Embedded systems
- Experience with Nvidia SOCs and Drive works Architecture
Benefits:
- Health Insurance
- Employee Stock Options
- Work From Home
- Flexible work hours
- Monthly Team outings and events
- Budget for Upskilling
- Flexible vacation
Equal Opportunity Employer:
Flux Auto's employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, age, gender identity, genetic factors, military/veteran status or other characteristics protected by law.
Vaccination Requirements:
Flux Auto is implementing new requirements for employees to be fully vaccinated from COVID-19.
Apply Now!
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon