Python
ProgrammingMANDATORY CRITERIA:
- Education: B.Tech / M.Tech in ECE / CSE / IT
- Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
- Proven expertise in digital, analog, and power electronic circuit analysis & design
- Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
- Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
- Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
- Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
- Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
- Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
- Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
- Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
- Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
- Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components
DESCRIPTION:
COMPANY OVERVIEW:
The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.
REQUIRED SKILLS:
- Extensive experience in hardware board designs and towards multiple product field deployment cycles.
- Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
- Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
- Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
- Completed at least two project from high-level design to final product level deployment.
- Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
- Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
- Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
- Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
- Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
- Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
- Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
- Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs
Embedded Systems Intern
Company: Glarenergy
Location: In-Office (Hyderabad)
Stipend Range: ₹1000 to ₹10000
Duration: 3 months
Position Overview
We are seeking a highly motivated and technically proficient Embedded Systems Intern to join our
engineering team. This role provides hands-on experience in the complete embedded system
development lifecycle, focusing on microcontroller programming, sensor integration, and system
prototyping. The ideal candidate will be passionate about hardware and software, eager to learn, and
ready to contribute to innovative projects.
Key Responsibilities
● Firmware Programming: Develop, test, and debug efficient firmware for various
microcontrollers and Processors (Beagle Boards) using Embedded C.
● Sensor Interfacing: Interface and acquire data from a diverse range of sensors (digital and
analog) using standard communication protocols (I2C, SPI, UART).
● Hardware Prototyping: Set up and test development boards and prototype circuits, ensuring
correct functionality and stability.
● Code Documentation: Maintain clean, well-documented code and manage projects using
version control practices.
Required Qualifications
Technical Skills
● Proficiency in firmware programming tailored for embedded systems.
● Demonstrated hands-on experience with popular microcontroller platforms (Arduino, ESP32,
or similar).
● Strong foundational knowledge of sensor technologies and interfacing, including data
acquisition and signal conditioning.
● Basic understanding of electronics and the ability to read circuit schematics.
Soft Skills
● Strong problem-solving and analytical thinking abilities.
● Excellent communication and teamwork skills.
● Ability to manage multiple tasks and meet deadlines.
Work Expectations
● Punctual attendance and adherence to agreed work schedule.
● Professional communication with team members and external contacts.
● Proactive approach to learning and skill development.
● Commitment to maintaining confidentiality of proprietary designs and information.
● Flexibility to adapt to changing project requirements and priorities.
Python
DockerSkills Required:
- Good experience with programming language Python
- Strong experience in Docker.
- Good knowledge with any of the Cloud Platform like Azure.
- Must be comfortable working in a Linux environment.
- Must have exposure into IOT domain and its protocols ((Zigbee & BLE ,LoRa,Modbus)
- Must be a good team player.
- Strong Communication Skills
VLAN, STP and many other switchings configurations.
taking ownership of the technical support for assigned analytical and ability to work under pressure, future job scope involves implementation, troubleshooter in routing switching domain ( L2 and L3)
Skill Required
Technical
-
● The suitable candidate shall have most of the following knowledge /skills/experience:
-
● Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware
-
Design Life Cycle.
-
● Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).
-
● Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.
-
● Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.
-
● Circuit building and Circuit Analysis Skills.
-
● Component Data Sheet analysis skills.
-
● Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).
-
● Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).
-
● Knowledge about Board Bring Up process.
-
● Testing (Integration testing, protocol/Driver testing, etc.).
-
● Experience in Embedded C programming and embedded system integration and can develop test cases for the same.
-
● Knowledge of IoT Open Source Programming / Development.
-
● Candidate will be responsible for research & development of M2M/IoT products.
-
● Candidate will be responsible for end-to-end embedded system integration.
-
Others
Abilities on the following shall be of added advantage:
-
● Component Procurement
-
● Vendor Interaction
-
● Tools Management
-
● Costing and resource estimation
-
● Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative
-
-
Decision level
Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending MachinesDemonstrate (Key competencies)
Healthy knowledge of most of the following:
-
● Embedded C
-
● 8/16 bit Microcontrollers
-
● Atmel Studio/ Arduino IDE
-
● Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)
-
● Hands-on experience on Test equipment and solder stations (SMD/DIP)
-
● M2M / IoT based development
|
Role: Senior Firmware Engineer Experience: 2-6 years Work Mode: Work from Office Location: Hyderabad Notice Period: Immediate to 30 days Mandatory Skills: Embedded C Programming, Debugging, Configuration Management Budget Range: As per Market Standards · The ideal candidate is a self-motivated, multi-tasker, and demonstrated team-player. · You will be an individual contributor responsible for the development of new software products and enhancements to existing products. · You should excel in working with Application (ASW) and Base software (BSW) components and have outstanding communication and leadership skills.
· Understand & Review System Requirements, System Architecture · Participate in CFT Meetings for Requirements Clarity · Develop & Enhance Software Requirements · Develop & Enhance Software Architecture · Understand / Review / Change Software Design Documents · Writing clean, high-quality, high-performance, maintainable code · Participate in Software Code Reviews · Review Test Scenarios developed for SWE4, SWE5 and SWE6 · Perform Investigation and provide Root Cause Analysis for failures · Support test and deployment of new products and features
· Embedded C Programming · Excellent Debugging skills · 16-bit or 32-bit Micro Controllers · Ability to interpret circuit and schematics · Knowledge of CAN and LIN communication protocols and UDS diagnostics · Knowledge of Sensors, Motors, and Closed Loop Control · Knowledge of Memory and Timing Analysis · Experience in Configuration Management (SVN, IBM Rational, JIRA) · Experience in Debugging using CRO, Debuggers, CANalyzer / CANoe · Working knowledge of ISO 26262 Functional Safety requirements · Good exposure to End-to-End product development · Knowledge about Automotive Standards – ASPICE · Perform Safety Analysis and Impact Analysis based on ISO26262 recommendations · Exposure to CAPL, Python and LabView
|
C++You would be part of:
- Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
- Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
- Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
- Writing Applications and Drivers from the scratch for (embedded)linux based systems.
- Scripting and automations around work flows of UAS usage.
- Working with existing sophisticated software stacks of subcomponents of UASs.
- Working closely with electronics, design and systems teams for architecture development and deployment.
- Working closely with Flight Controller engineers to do collaborative development of UAVs.
We expect you to be:
- Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
- Very good in analytical abilities to be able to do core research and development activities.
- Able to write low level drivers (wrapper or core) from the scratch.
- Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
- Able to understand existing complex embedded software stack written in C/C++.
- Solid in C.
- Good in C++.
- Comfortable with using hardware debuggers.
- Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
- Having Solid understanding of interrupt mechanisms.
- Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
- Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
- Having Good understanding of the concept of bootloaders.
- Able to multitask.
- A self-motivated and motivating personality who can work well independently as well as part of a team
- Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude
You are awesome if you are:
- Experienced in Linux Device Driver development.
- Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
- Experienced in data filtering techniques (Example: Kalman filter)
CEmbedded System Engineer
Working on Embedded programming on the microcontroller, Linux/Android OS development
Working on component sourcing, PCB Design and fabrication
Working on assembly and testing
Working on field deployment and Testing
Skills:
Embedded Systems
C Programming
Must be exceptionally good in Embedded Systems C programming, testing/ debugging and in advanced C concepts
Capable of working in Embedded Systems based projects based on 8 and 32 bit microcontrollers (STM32)
Experience with communication protocols and peripherals like UART, SPI, RTC, Ethernet
Hands on experience in IDE like Keil, AVR Studio, MPLAB
Strong documentation and writing skills
Work Experience
1-3 years preferable, fresher with good embedded system knowledge can also apply
- Extensive knowledge of linux kernel internals.
- Good knowledge of C programming language.
- Familiarity with any processor architecture, virtualization, storage and network management.
- Strong experience in debugging linux kernel mode
- Debugging experience across hardware and platform firmware.
C++
Data Analytics
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon