IOT developer

Candidate should have 6-9 years of experience in IoT embedded systems. He/ She should be

passionate, tech savvy, academically sound, have interest in embedded devices and

technologies.

Experience:

• Exposure to Microcontroller/Microprocessor Architecture /Family e.g. ARM Cortex,

Microchip, Xtensa ESP32, TI CC32XX, STM32

• Knowledge of Bare metal and any RTOS (Free RTOS, uC OS, EmbOSs, VxWorks, QNX)

• Knowledge of Microcontroller peripherals and low level drivers e.g. ADC, DAC, I2C, SPI,

UART, CAN, RS485, DMA, Ethernet, Display

• Knowledge of networking concepts like OSI layers, embedded TCP/IP stacks and common

IP protocols

• Knowledge of RF protocols WIFI, Bluetooth/BLE, IoT Cellular

• Knowledge of IoT communication protocols MQTT, COAP, AMQP

• Knowledge of Build toolchains and framework such as IAR, GCC, Keil, Mplab

• DFMA and DFMEA, Design release process

• Coding standards, guidelines and compliance tools

• Version control and repositories using git tools

• Software quality assurance and automated testing tools Experience / Skills Embedded software design cycle

• Documenting Software Design (flow charts, state diagram, logic design, analysis, implementation, debugging and testing etc)

• Good hands-on programming in Embedded C, C++.

• Programming in scripting languages such as batch, shell, python is a plus.

• Experience with AWS/Google cloud for device connectivity. Exposure to IoT cloud services. e.g. AWS IoT

• Software and Hardware integration testing and troubleshooting

• Protocol debugging using protocol analyzer.

• Understanding of Schematic/ Hardware design around microcontrollers like ST, TI, Atmel, Microchip, ARM core

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

Responsibilities and Duties
The team leader will be leading a team of Hardware engineers, firmware and testing engineers. Being a team leader, you will primarily be responsible for fast and accurate delivery from the team which might even include handholding of team members whenever needed. Embedded team would be responsible for the following:
Hardware Design including

• Circuit design as per design requirements
• Schematic capture in the tool
• CAD layout
• QA/QC/functional testing
• PCB assembling and rework
• Lab inventory management
• Component procurement.

Firmware Design Including

• Firmware Design and architect
• Software Development
• Firmware Testing
• Code management over svn

Other Responsibilities

• The team leader would also be responsible for architecting the system, creating detailed design documents as per requirement and maintaining quality control of all the deliverables.
• The team leader would also be required to create a detailed test plan and list of test cases to be executed and if needed, create proper environment for the same.
• Ownership of the ‘ground up’ design and architecture of embedded software for real time applications.
• Decomposition of designs in to structured modules/functions ready for implementationby yourself and the team.
• Hands on development in C of new ARM based embedded software for a range of products currently under development
• Ensure quality of software using appropriate methods(Code Review, Static Analysis, Unit Test etc.) and application of suitable Coding Standards
• Maintain, update and enhance existing embedded software written in C
• Documentation of software products, development and execution of test plans
• Work closely with other members of the engineering team to assist with the correct choice of processors and supporting hardware

Required Experience, Skills and Qualifications

• Experience of 8+ years in field of embedded systems designing and developement.
• Familiar with usage of various LAB instruments.
• Strong fundamentals of electronics (Digital and analog) are must.
• Well versed with circuit designing and HW debugging
• Analog and Digital Circuit designing: familiarity with micro-controllers, memories, communication interfaces, op-amps, comparators, relays, inductors and capacitors, Handling EMI and Noise issues associated with circuits.
• Understanding of BLE protocols will be required.
• Understanding of scientific methodologies of experimentation, data-gathering and interpretation and hypothesis.
• Understanding of basic architecture, debugging of sensors.
• Experienced in embedded-C coding, memory allocations.
• Experience with any RTOS designing preferably with FreeRTOS at least with Semaphores, SW Timers, synchronisation and event handlings, task handling and prioritization.
• Understanding of micro-controller architecture, programming and debugging methodologies, interrupt-handling.
• Experience with any of the IDEs and debuggers for ARM architecture.
• Basic understanding of assembly programing of ARM architecture
• Understanding of basic peripherals like UART, CAN, I2C, Timers, Counters, PWMs, ADCs, DAC.
• Experience/knowledge in IoT devices (sensor, gateway, cloud) handling.
• Familiarity with CAD tools for schematics and layout generation.
• Experience on MS-Office.
• Familiarity in understanding and creating various test plans and documents.

General Skills Needed/ Requirements:

• Strong knowledge of components and should be able to suggest the team with right componenet
• Candidate must have a knack to use his/her technical knowledge to give it back to society.
• Candidates passionate to bring a change in society will be preferred with no compromise on pay check.
• Candidates must be open to work with communities to get feedback on product features so that products are best fit for social upliftment.
• Candidates must be open to travel to needy communities and should not hesitate to get his/her hands dirty to bring a change to the communities.
• Candidates must find associated with the cause and mission of the company.
• Open to work in open startup culture and give his/her 100%.
• Analytical reasoning and fact-based brainstorming capabilities will be highly preferred.
• Ready to relocate to Gurugram.
• Occasional field visits.

What you need to have:

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SYSTEMS ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with multi-disciplinary engineering team and customer to identify and recommend hardware needs and requirements for project/product.
• Modify or assist in the development of software architecture and design for new products, prototype, or re-design, including sourcing build environments and writing technical support and control documentation.   
• Read Block Diagrams and detail circuit schematics and layout of proposed or existing hardware and assess the software and driver requirements.
• Participates in cross-divisional Edge IoT projects and/or proposals.
• Develop, oversee, and document automated tests for electrical hardware design and products as well as final operating drivers and systems.
• Evaluate and investigate product failures, and recommend repair or design modifications based on specifications, cost, resources, and risks.

REQUIREMENTS:

• Ability to creatively approach challenges and cleverly solve difficult problems.
• Ability to independently identify daily design and customer support tasks, self-start and motivate.
• Ability to manage several projects and prioritize appropriately, with minimal supervision.
• Ability to work in a collaborative team environment as well as independently.
• Ability to learn and work in virtual environments (CAD & Hardware build packages) in-which candidate’s skills are low but persevere and overcome skill gaps autonomously.
• Some experience programming with embedded systems designs and multithreaded real-time operating systems is required.
• Solid programming experience. Preferably in C or C++, .NET, and Java programming languages.

EXPERIENCE:

We as a team are looking for freshers or young professionals with (0-4 years of experience) passion and eagerness to create scalable and optimized software systems and execute complete embedded software development lifecycle.