Jr. Linux Admin

We are looking for Embedded Developer with Leading Global MNC - Faridabad

Description:

• Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
• Excellent knowledge of C/C++ programming and exposure to Assembly.
• Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
• Hands-on experience in developing HAL, BSP and low-level device drivers.
• Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
• Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
• Knowledge of AUTOSAR concepts and architecture is an advantage.
• Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
• Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
• Experience in board bring-up, hardware-software integration and debugging of embedded boards.
• Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
• Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
• Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
• Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
• Experience in reverse engineering and debugging of embedded systems.
• Strong understanding of embedded system architecture and system-level design.
• Experience with Embedded Linux and/or RTOS-based systems is an advantage.
• Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
• Knowledge of NMEA/NMEA 2000 standards is a plus.
• Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
• Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

Roles & Responsibilities:

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

Embedded Systems / Firmware Engineer

Key Responsibilities

• Develop embedded firmware for IoT and connected devices using C/C++.
• Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
• Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
• Work with Python and Shell scripting for development and automation.
• Apply basic AI/ML and computer vision concepts to embedded applications.
• Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.

Required Skills

• C, C++, Python, Shell Scripting
• Embedded Systems & Firmware
• IoT, RTOS, Bare Metal
• Memory Management & Device Drivers
• Communication Protocols
• Camera, Motor & Vision Systems
• Basic AI/ML understanding
• Electrical & Mechanical Design understanding

Role Overview

The Embedded Firmware Engineer will be responsible for development, testing, debugging, and maintenance of embedded firmware for EV Charger and IoT-based products using ESP32 platforms. The role involves working closely with hardware, cloud, mobile application, and testing teams to develop reliable and production-ready embedded solutions.

The candidate should have strong hands-on experience in Embedded C programming, ESP-IDF framework, RTOS-based firmware development, peripheral interfacing, communication protocols, and debugging of embedded systems. Knowledge of EV charging systems, charger communication protocols, and industrial embedded product development is highly preferred.

Key Responsibilities

• Develop embedded firmware in C for ESP32-based embedded systems.

• Work extensively on ESP-IDF framework for application development.

• Design modular, reusable, and scalable firmware architecture.

• Develop low-level drivers and middleware for embedded peripherals.

• Implement multitasking applications using FreeRTOS.

• Optimize firmware for performance, memory utilization, stability, and low power operation.

• Perform firmware integration with hardware modules and external systems.

• Develop and debug firmware for UART, SPI, I2C, CAN, GPIO, ADC, PWM, Ethernet, Wi-Fi, BLE, RS485, and Modbus communication.

• Interface embedded systems with energy meters, display modules, RFID modules, relays/contactors, sensors, and communication modules.

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

About the Internship

SkillSecure X is looking for enthusiastic Embedded Systems & IoT Design Interns who are eager to gain practical experience in embedded programming, microcontrollers, sensors, and Internet of Things (IoT) applications. This internship offers hands-on learning through guided projects and industry-focused tasks.

Responsibilities

• Develop basic embedded and IoT applications.
• Work with microcontrollers such as Arduino or ESP32.
• Interface sensors, actuators, and communication modules.
• Write and debug embedded C/C++ programs.
• Assist in IoT-based project development.
• Document project progress and technical findings.
• Complete weekly assignments and practical tasks.

Required Skills

• Basic knowledge of Embedded Systems or Electronics.
• Familiarity with C/C++ programming.
• Understanding of microcontrollers and sensors.
• Interest in IoT technologies and hardware development.
• Good analytical and problem-solving skills.

Eligibility

• Undergraduate or postgraduate students.
• Recent graduates.
• Students pursuing Electronics, Electrical, Embedded Systems, IoT, Computer Science, Mechatronics, or related fields.

Benefits

• Hands-on industry-oriented projects.
• Mentor guidance throughout the internship.
• Internship Completion Certificate.
• Letter of Recommendation (based on performance).
• Opportunity to build a professional portfolio.
• Flexible remote internship.

Greetings from Skoegle IoT Innovations Pvt Ltd 

Job Summary

We are looking for an experienced Embedded Firmware Engineer with expertise in embedded systems, firmware architecture, RTOS, and embedded software development for IoT, wearable, automotive, industrial, and medical-grade products.

Key Responsibilities

• Design, develop, debug, and maintain firmware in C, C++, and Embedded C.

• Develop firmware for ESP32, nRF52832/52840, ATmega328P, and Raspberry Pi platforms.

• Integrate sensors using I2C, SPI, UART, ADC, GPIO, PWM, CAN, and USB.

• Develop RTOS and bare-metal firmware.

• Implement BLE, GSM/4G, GPS/GNSS, LoRa, Wi-Fi, NFC/RFID communication.

• Design bootloaders, OTA updates, and secure firmware upgrades.

• Optimize power consumption, sleep modes, memory allocation, and performance.

• Develop sensor drivers, calibration routines, and medical-grade firmware.

• Program bare ICs and support PCB bring-up, pin selection, and hardware validation.

• Support HTTP/HTTPS GET/POST/PUT APIs and embedded networking.

Required Skills

• Embedded Systems and Embedded Software Development

• C, C++, Embedded C

• RTOS, Bare-Metal Programming

• Operating Systems fundamentals

• I2C, SPI, UART, Digital & Analog Signals

• Sensor Integration

• Arduino IDE, VS Code, SEGGER Embedded Studio, J-Link

• ESP32 Series, nRF52832/52840, ATmega328P, Raspberry Pi

• BLE (UUIDs), GSM (band configuration), GPS, LoRa

• Python, HTML, HTTP/HTTPS

• Bootloader Development, OTA, Power Optimization

• Memory Allocation, Sleep Modes, Sensor Calibration

• Machine Learning on Embedded Systems (preferred)

Power Electric Vehicles with embedded software for battery management and autonomous driving.

What you'll do:

• Develop BMS algorithms (SOC/SOH estimation)
• Implement CAN bus communication protocols
• Code motor control algorithms (FOC, sensorless)
• Build ADAS features (ultrasonic parking, vision)
• HIL testing with Vector tools
• Optimize for automotive-grade reliability (AUTOSAR)

What we need:

• C/C++, Embedded Linux/RTOS
• Microcontroller experience (STM32, NXP)
• Control systems or automotive interest
• Debugging skills (oscilloscopes, logic analyzers)

Future-proof skills:

• Work on actual EV prototypes
• Portfolio for Tata, Mahindra EV teams
• Automotive cybersecurity exposure

Experience and Required Skill Sets: 

1      Solid experience in software design and development using Microsoft ASP.NET framework, C#, Visual Studio, and in writing clean, readable, and easily maintainable code

2      5+ years of experience in WCF, WPF, VB.NET, SQL Server, JQuery, Angular 10 and above.

3      5+ years of experience in developing highly scalable REST/Web APIs

4      5+ years of experience in developing highly efficient SQL/NoSQL Queries

5      5+ years of experience in Relational and Document databases

6      Strong understanding of object-oriented programming and possess strong fundamental design principles for building a scalable application.

7      Experience in using the MVC framework, working knowledge in APIs, and Service Oriented Architecture

8      Strong understanding of object-oriented programming and possess strong fundamental design principles for building a scalable application.

9      Experience in Angular version 10 and above is required 

10   Expert in SQL programming & Database Design (Stored procedure, Function, Trigger, Constraints, Replication) 

11   Strong ability in HTML and JavaScript (AJAX, DOM)

12   Development experience with data integration technologies including REST, SOAP, JSON, XML

13   Expertise in programming and usage of any unit testing framework. Expertise in integration testing and continuous integration.

14   Experience working in a DevOps environment will be an added advantage.

Responsibilities: 

•       Ability to create complex, enterprise-transforming applications that meet and exceed client expectations. 

•       Responsible for the bottom line. Strong project management abilities. Ability to encourage the team to stick to timelines.

•       Follow best-in-class coding practices and review the solutions vis-à-vis the requirements and technical specifications.

•       Should demonstrate strong client interfacing capabilities like emails and calls with clients in the US/UK