Microcontroller- Embedded Engineer

Basic Qualification: BE / Btech Computer Science

Desirable Skills:

1.Software development using Embedded C, C++ with programming standards (MISRA)

2.Knowledge of bus systems, which are used in the automotive industry, like CAN, LIN, I2C, SPI, etc)

3.Software development processes –A-SPICE V-cycle

4.Experience with development of control units for the automotive industry, especially experience with the development based on AUTOSTAR basic software.

5. Experience in the automotive industry according to common development and parameterization tools (i.e. Vector CANoe).

6.Knowledge of standards for safety-critical software (ISO 26262) is a plus.

Min 4 Years Experience in Embbeded domain

1. C++

2. C++ ★ Profinet ProfiSAFE ★ Embedded RTOS

3. rtos c c++ python ★ Industrial protocols Embedded Security Threat Modeling ★ Embedded C Embedded Linux

4. Embedded Systems ★ Embedded C ★ C++ ★ RTOS

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

Greetings from Utthunga Technologies!!!

Job Description:

• Ability to contribute as an independent developer
• Boot-Loader: Proficient in customization in u-boot for custom hardware
• Hands on experience with Cortex M series based architecture
• Linux Kernel: proficient in Linux device driver development and BSP development in YOCTO environment
• Programming language: Strong in C, particularly system software development
• Sound knowledge and experience of Linux OS and OS configurations
• Sound knowledge/ understanding on ARM architecture
• Strong Embedded Software background and Linux internals
• Experience of Designing and Architecture for Application and Middleware Development.

• Design and implement software of embedded devices and systems from requirements to production and commercial deployment
• Design, develop, code, test and debug system software
• Review code and design
• Analyze and enhance efficiency, stability and scalability of system resources
• Integrate and validate new product designs
• Support software QA and optimize I/O performance
• Provide post production support
• Interface with hardware design and development
• Assess third party and open source software

• Proven working experience in software engineering
• BS degree in Computer Science or Engineering
• Experience in hands-on development and troubleshooting on embedded targets
• Solid programming experience in C or C++
• Proven experience in embedded systems design with preemptive, multitasking real-time operating systems
• Familiarity with software configuration management tools, defect tracking tools, and peer review
• Excellent knowledge of OS coding techniques, IP protocols, interfaces and hardware subsystems
• Adequate knowledge of reading schematics and data sheets for components
• Strong documentation and writing skills

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc

Develop, design, and implement embedded applications.

· Prepares appropriate documentation as required by internal product development processes

· Conducts and participates in design, code and test reviews and inspections, as well as the feasibility, efficacy and compliance to functional and regulatory standards.

· Works closely with the software team, the software verification team, the functional manager and the project manager.

· Collaborates with distributed, cross-functional teams to ensure products meet quality, performance, scalability, reliability and schedule goals.

· Investigates software, hardware, and system problems using a variety of techniques and provides innovative solutions.

· Conduct and participate in reviews and inspections for all elements in the firmware lifecycle to ensure that our code quality and customer satisfaction goals are achieved

· Integrate and validate new product designs

· Provide post-production support

Skill Sets:

• B.Tech. / M.Tech. (any stream)

· Good knowledge in firmware development field with more than 3 years of experience

· Basic knowledge of software life cycle, algorithm and data structure.

· Excellent knowledge of OS, coding techniques, IP protocols, interfaces and hardware subsystems

· Adequate knowledge of reading schematics and data sheets for components.

· Ability to understand the electrical schematics and work closely with electrical team.

· Experience with Real Time Operating Systems and Embedded Linux.

· Mode of network connectivity - good idea about GSM/GPRS, Wifi, Ethernet mode of connections. TCP, MQTT, HTTP mode of connection will be a big plus

· Protocols Like UART, SPI, I2C, CAN, MODBUS, TCP/IP, USB, Bluetooth.

· Experience in modules like Wi-Fi, BLE, Lora WAN, ZIGBEE, RF etc.

· Should have experience in working with TFT and LED displays.

· Extensive experience in micro-controller/microprocessor (like ARM Cortex M, ESP32, STM Chips, NXP, BeagleBone , ESP chips, BeagleBone black, STM Chips, Atmega chips etc.)

· Familiarity with software configuration management tools, defect tracking tools, and peer review (GIT, SVN)

· History of driving project execution and timely delivery while ensuring a quality focus.

· Experience writing / interfacing with device drivers.

· Experience in Agile development processes and philosophies.

· Strong documentation and writing skills

Mandatory Skills:

· Basics of embedded system development

· Embedded C/C++

· Scripting Lang - Python

· Basics of wireless communication

· RTOS

· Strong Problem-Solving Skills

· Analytical Skills (Good Aptitude)

· Communication Skills

You’ll be our: Firmware Engineer

You’ll be based at: IBC Knowledge Park, Bengaluru

You’ll be Aligned with: Embedded Manager

You’ll be a member of: Vehicle Software

What you’ll do at Ather:

A successful candidate is expected to lead the Firmware development and integration effort for various Ather products and be responsible for qualifying and integrating FW at various stages with HW. Responsibilities include:

• Understanding requirements from different stakeholders and translating these to application features

• Writing high quality source code to program complete applications within deadlines

• Unit-testing code for robustness, including edge cases, usability, and general reliability

• Performing functional and non-functional testing

• Troubleshooting and debugging applications

• Designing creative prototypes according to specifications

• Evaluating existing applications to reprogram, update and add new features

• Developing technical documents and handbooks to accurately represent application design and code

• Identifying and communicating possible risks along with preventive and corrective measures

• Designing HW/SW integration while working with HW/Algorithms/Cloud teams to deliver an integrated solution. 

Here’s what we are looking for: 

Must have: 

• ECU Software development experience (any of the ARM based Auto ECUs Body Electronics/Infotainment/ Powertrain/Cluster) 

• Previous experience with Low level firmware, Boot loaders, Device Drivers development 

• Hands on Experience Communication Protocols CAN, I2C, SPI, RS232

• Experience with static analyser, JTAG tools etc…

• Knowledge in Assembly and compilers

• Strong testing & debugging skills, experience with logic analysers

• Language: C, C++

Nice to have:

• Knowledge of HW design for ECUs

• Experience with UDS, AutoSAR, ISO26262, MISRA Guidelines 

• Previous experience with SIL and HIL Testing as well as Test case generation for the same.

• Hand on experience in using CAN tools & CAPL Scripts, Bus Master

• Real Time operating Systems, Python, Matlab/Simulink

You bring to Ather:

• BE/B.tech/B.Sc is minimum req with minimum 2-6 years of prior industry experience.