Embedded Software Engineer

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

Basic Qualification: BE / Btech Computer Science

Desirable Skills:

1.Software development using Embedded C, C++ with programming standards (MISRA)

2.Knowledge of bus systems, which are used in the automotive industry, like CAN, LIN, I2C, SPI, etc)

3.Software development processes –A-SPICE V-cycle

4.Experience with development of control units for the automotive industry, especially experience with the development based on AUTOSTAR basic software.

5. Experience in the automotive industry according to common development and parameterization tools (i.e. Vector CANoe).

6.Knowledge of standards for safety-critical software (ISO 26262) is a plus.

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

• 32-bit Microcontroller knowledge is essential (ARM Cortex based micro-controllers (STM32).
• Esp32 architecture knowledge is essential.
• Strong experience in C, C++, Free-RTOS
• Strong experience in CUBEMX IDE, MDK Version 5 – Keil, Arduino IDE environment
• Good knowledge in HW and communication protocols like CAN, SPI, UART, I2C, USB 
• Good knowledge in TFT Displays and Sensors is added advantage
• Good knowledge of implementation of motor controls as required, pulse width modulation schemes (PWM).
• Good knowledge of power electronics (TRIACs, MOSFETs, IGBTs, gate drivers) and require protections (Over/under voltage/current).
• Document firmware designs, specifications, test plans, revisions and produce test reports

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Duration:Fulltime
Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

Job Description:

WLAN Linux Device Driver development (802.11ax preferred)

• WLAN Debugging
• WLAN Firmware development (802.11ac, 802.11n)
• Networking/Wireless Domain knowledge
• Hostapd, Supplicant
• Cross compiling/porting experience
• Performance optimization & Firmware enhancements

Must have Skills:

• 1-10 years of experience in Embedded Software Design, Implementation and testing
• Good knowledge of C or C++
• Basic knowledge in Scripting (Shell, Perl or Python)
• Proficiency in Problem Solving and Debugging skills
• Excellent team working skills
• Experience with version control e.g. GIT
• Basic experience of working in Linux OS
• Network Drivers
• WLAN Protocol Knowledge – 11n, 11ac
• WLAN Linux Device Drivers
• Hostpad, Supplicant
• WLAN Debugging
• Fluent in English

Desired Candidate Details:

• Design, development, and maintenance
• WLAN Stack development and debugging
• Feature Enhancements, Applications, Tools for SDKs
• Basic module level unit testing, System testing
• Providing support to technical documentation team and field application engineers
• Close collaboration with the Chipset Vendor on the Software Development
• Participations in the Product design and Software Design Documentation – High level / Module level / Low level design
• Troubleshooting software and architectural issues

We are looking for a seasoned Wireless LAN Software Engineer to join our Wireless & Networking team in Chennai, Pollachi, Kochi (Cochin), Gurugram, Manesar, Bengaluru (Bangalore). The candidate must be an experienced Engineer and a good team player, who will work on Wireless software solutions which will enable us to develop the products for our customers quickly with industry leading quality. Working with Embedded Software in agile development projects, you will be responsible for creating and maintaining software of Wireless Access Point and Router Products including Module design, Development, JIRA Updates and Unit testing of the Software that is meeting industry standards, creating demos of the solution and customer support.