Hydrologist / Drainage Planning Expert

The Junior Executive – Billing plays a supporting role in the Commercial Department, assisting in basic billing documentation, logsheet collation, cheque deposit coordination, and data upkeep. The role ensures foundational billing tasks are completed timely and helps maintain clean records to support the department’s overall monthly billing targets.

📚 Education & Skill Requirements

• Familiar with Excel, PDF editing, and scanning

• Basic knowledge of GST, billing terminology

• Good discipline in documentation and communication (English or Hindi)

________________________________________

🔧 Key Responsibilities

📑 Billing Support & Documentation

1. Assist in collecting data and log sheets from internal teams

2. Help prepare basic RA/proforma invoices as per format

3. Print, scan, and file billing copies (soft & hard copy)

4. Courier or hand over bills via office boys for submission

📋 Log sheet & Record Keeping

1. Update and maintain log sheet records in Excel

2. Help prepare deduction templates for operator and breakdown

3. Assist in preparing billing compliance folders and GRNs

🧾 Cheque Coordination & Deposit

1. Collect cheques from admin team or site

2. Ensure timely deposit in bank or handover to accounts team

3. Maintain daily tracker of cheque pickup/deposit

📊 Reporting & Follow-up

1. Submit daily task update on group by EOD

2. Report pending work or delays to Executive / Sr. Executive – Billing

3. Keep records ready for audit and HOD reviews

Position: NDT Applications Engineer – PAUT ( Corrosion Mapping/ Weld Inspection / PWI/Advance FMC-TFM)

Location: Noida

Job Type: Full-time

Experience Level: Mid-Level / Senior-Level

Industry: Non-Destructive Testing (NDT), PAUT.

We are specifically looking for candidates with hands-on experience as an NDT Senior Engineer; only those with relevant NDT expertise should apply.

We are specifically looking for candidates with hands-on experience as an NDT Senior Engineer; only those with relevant NDT expertise should apply."

Job Summary

We are seeking a highly skilled NDT-Engineer with expertise in Ultrasonic Testing (UT) and Phased Array Ultrasonic Testing (PAUT) for robotic integration. This role involves coordinating with software and control system teams to integrate UT & PAUT ( Corrosion Mapping/Weld Inspection) into robotic NDT systems, ensuring optimal inspection performance.

The engineer will focus on sensor selection, ultrasonic parameter optimization, calibration, and data interpretation, while the software team handles control algorithms and motion planning. The ideal candidate should have strong experience in NDT automation, probe and frequency selection, phased array data acquisition, and defect characterization.

Key Responsibilities

1. NDT Inspection & Signal Optimization

• Optimize probe selection, wedge design, and beam focusing to achieve high-resolution imaging.

• Define scanning techniques (sectorial, linear, and compound scans) to detect various defect types.

• Analyse UT & PAUT signals, ensuring accurate defect detection, sizing, and characterization.

• Implement Time-of-Flight Diffraction (TOFD) and Full Matrix Capture (FMC) techniques to enhance detection capabilities.

• Address electromagnetic interference (EMI) and signal noise issues affecting robotic UT/PAUT.

• Develop procedures for coupling enhancement, including the use of water column, dry coupling, and adaptive surface-following mechanisms for robotic probes.

• Evaluate attenuation, beam divergence, and wave mode conversion for different material types.

• Work with AI-based defect recognition systems to automate data processing and anomaly detection.

• Test different scanning configurations for challenging surfaces, curved geometries, and weld seams.

• Optimize gain, pulse repetition frequency (PRF), and filtering settings to ensure the highest signal clarity.

• Implement phased array data interpretation techniques to differentiate between false indications and real defects.

• Develop and refine automated thickness gauging algorithms for robotic NDT systems.

• Ensure the compatibility of PAUT imaging with robotic motion constraints to avoid signal distortion.

2. NDT-Integration for Robotics (UT & PAUT)

•Select, integrate, and optimize ultrasonic transducers and phased array probes for robotic inspection systems.

•Define NDT scanning parameters (frequency, angle, probe type, and scanning speed) for robotic UT/PAUT applications.

•Ensure seamless coordination with control system and software teams for planning and automation.

•Work with robotic hardware teams to mount, position, and align UT/PAUT probes accurately.

•Conduct system calibration and validate UT/PAUT performance on robotic platforms.

3. Data Analysis & Reporting

•Interpret PAUT sectorial scans, full matrix capture (FMC), and total focusing method (TFM) data.

•Assist the software team in processing PAUT data for defect characterization and AI-based analysis.

•Validate robotic UT/PAUT inspection results and generate detailed technical reports.

•Ensure compliance with NDT standards (ASME, ISO 9712, ASTM, API 510/570) for ultrasonic inspections.

4. Coordination with Software & Control System Teams

•Work closely with the software team to define scan path strategies and automation logic.

•Collaborate with control engineers to ensure precise probe movement and stability.

•Provide technical input on robotic payload capacity, motion constraints, and scanning efficiency.

•Assist in integration of AI-driven defect recognition for automated data interpretation.

5. Field Deployment & Validation

•Supervise robotic UT/PAUT system trials in real-world inspection environments.

•Ensure compliance with safety regulations and industry best practices.

•Support on-site troubleshooting and optimization of robotic NDT performance.

•Train operators on robot-assisted ultrasonic testing procedures.

Required Qualifications & Skills

1. Educational Background

•Master’s Degree in Metallurgy/NDT/Mechanical.

•ASNT-Level II/III, ISO 9712, PCN, AWS CWI, or API 510/570 certifications in UT & PAUT preferred.

2. Technical Skills & Experience

•3-10 years of experience in Ultrasonic Testing (UT) and Phased Array Ultrasonic Testing (PAUT).

•Strong understanding of probe selection, frequency tuning, and phased array beamforming.

•Experience with NDT software

•Knowledge of electromagnetic shielding, signal integrity, and noise reduction techniques in ultrasonic systems.

•Ability to collaborate with software and control teams for robotic NDT development.

3. Soft Skills

•Strong problem-solving and analytical abilities.

•Excellent technical communication and coordination skills.

•Ability to work in cross-functional teams with robotics, software, and NDT specialists.

•Willingness to travel for on-site robotic NDT deployments.

Work Conditions

•Lab – Hands-on testing and robotic system deployment.

•Flexible Work Hours – Based on project

Benefits & Perks

•Competitive salary & performance incentives.

•Exposure to cutting-edge robotic and AI-driven NDT innovations.

•Training & certification support for career growth.

•Opportunities to work on pioneering robotic NDT projects.

Job Summary :

As a Firmware Developer, you will be responsible for designing, developing, and optimizing embedded firmware for Bluetooth Low Energy (BLE) medical devices. You will collaborate closely with mobile, cloud, and hardware teams to ensure seamless communication and system reliability.

Location : Hyderabad

Key Responsibilities

● Firmware Development – Architect, implement, and optimize robust embedded firmware for BLE-based medical devices.

● BLE Communication – Ensure reliable BLE communication by fine-tuning GATT profiles, GAP settings, and connection parameters.

● Memory & Performance Optimization – Manage static memory allocation, flash memory layout, and power efficiency in resource-constrained environments.

● Cross-Platform BLE Handling – Work with mobile teams to handle BLE behavior inconsistencies across iOS and Android.

● Debugging & Optimization – Utilize BLE sniffers, debugging tools, and real-time logging to troubleshoot firmware issues.

● Security & Compliance – Implement secure pairing, bonding, and OTA firmware updates while adhering to medical device standards.

Required Skills & Expertise

● Strong experience of 4+ years in Firmware/Embedded Development. ● Strong knowledge of BLE stack APIs (GATT, GAP, L2CAP) and BLE protocol internals (advertising, connection events, link layer).

● Proficiency in C for embedded systems, with expertise in static memory management.

● Experience with wear leveling, sector erase schemes, and endurance techniques.

● Familiarity with BLE connectivity challenges on iOS & Android and ability to mitigate inconsistencies.

● Hands-on experience with Debugging like Wireshark, TI SmartRF Sniffer, or equivalent.

● Exposure to BLE-based cloud workflows and real-time data synchronization.

● RTOS Knowledge, Understanding of task scheduling, ISR management, and power-optimized firmware.

● Experience with TI CC2640R2F & TI-RTOS is a plus.

Nice to Have

● OTA Firmware Updates: Experience with secure BLE pairing, bonding, and firmware upgrade mechanisms.

● Embedded Diagnostic Tools: Ability to develop real-time diagnostics for memory usage, BLE packet flow, and connection stability trends.

Why Join Monitra Healthcare?

🔬 Impact-Driven Work: Build life-saving medical technologies that make a real difference.

🚀 Cutting-Edge Tech: Work with advanced BLE, IoT, and AI-powered healthcare solutions.

🤝 Collaborative Team: Engage with a multidisciplinary team of engineers, data scientists, and healthcare experts.

🔗 Join us in shaping the future of connected healthcare!

Responsibilities

• Build efficient, testable and reusable codes.
• Collaborate with engineers, PMs and designers to quickly ship new requirements.
• Take on tough design and product problems while working cross-functionally across design and engineering to polish the product experience.
• Solve complex performance problems and architectural challenges.
• Thrive in a culture of continuous improvement by optimizing web products and related components to achieve and maintain high performance of business applications.
•  

Requirements

• 2-3 years experience with hands on experience in both iOS  platform with an attitude to learn the other platform.
• Strong passion for Programming in general and iOS App development in specific.
• Experience in source revision control systems such as git, svn.
• Knowledgeable about MVC and MVVM architecture.
• Experience working with remote data via REST and JSON.
• Experience with SQL Lite and other databases.
• Experience with UI development.
• Experience with publishing apps.
• Positive attitude towards work (Dynamic) and good communication skills.

Required iOS skill

• Good knowledge of SWIFT, Xcode and iOS widgets.
• Experience with Core data.
• Experience in integrating 3rd party libraries.
• Experience in building multiple Xcode schemes.

We are searching for an experienced Product Manager with a minimum of 4 to 5 years of relevant experience in the E-commerce industry, ideally with technical knowledge related to e-commerce websites. As a Product Manager, your role will be pivotal in driving the development and enhancement of our e-commerce platform. Your primary objective will be to ensure the successful delivery of innovative and customer-centric product features and functionalities.

Responsibilities:

• Formulate and execute a comprehensive product strategy and roadmap for our e-commerce website, aligning it with business objectives and customer requirements.
• Conduct thorough market research and competitive analysis to identify industry trends, customer preferences, and best practices.
• Collaborate closely with cross-functional teams, including engineering, design, marketing, and operations, to define precise product requirements and specifications.
• Prioritize product features and enhancements based on their business value, customer feedback, and market demands.
• Work closely with the development team to ensure prompt and high-quality delivery of product releases.
• Monitor key performance indicators (KPIs) and perform data analysis to evaluate the performance of our products and identify areas for improvement.
• Gather and analyze user feedback, conduct user testing, and iterate on product features to enhance the overall user experience.
• Stay up-to-date with industry trends and technological advancements in the e-commerce space, leveraging this knowledge to drive product innovation.
• Collaborate with stakeholders to define and execute effective go-to-market strategies for new product launches and feature releases.
• Act as a product evangelist, effectively communicating the product vision, strategy, and value proposition to internal teams and external stakeholders.

Qualifications:

• Possess a Bachelor's degree in a relevant field (such as business, computer science, engineering, or a related discipline). An MBA or equivalent qualification is desirable.
• Have at least 4 to 5 years of experience as a Product Manager, preferably in the E-commerce industry.
• Demonstrate a strong technical understanding and knowledge of e-commerce platforms and associated technologies.
• Showcase a proven track record of successfully delivering and launching customer-focused products and features.
• Exhibit familiarity with agile product development methodologies and experience collaborating within cross-functional teams.
• Possess an analytical mindset with the ability to gather and interpret data for making informed product decisions.
• Display excellent communication and interpersonal skills, with the capacity to collaborate effectively and influence stakeholders at all organizational levels.
• Showcase strong problem-solving abilities and strategic thinking, while also paying meticulous attention to detail.
• Have a results-oriented mindset with a focus on driving business growth and ensuring customer satisfaction.
• Demonstrate a genuine passion for e-commerce and remain up-to-date with industry trends and best practices.

Key Skills: Good at writing post descriptions, Responsible for providing Reel Description, Innovative in writing the video descriptions, Good at writing website content, Perfect in providing the add copy, researching about the topic and writing the article 

About Company:  Workhours is India's 1st Ed-Tech Company Focusing on Self-Employment. We want to change the way people think about their careers from how to get a job to how to become self-employed. Example of how digital payments changed the behaviour of a person paying from cash to paying using digital apps. 

Job Description:  Our team is looking for CONTENT WRITERS who are incredibly proficient at writing post descriptions, responsible for providing reel descriptions, creative in writing video descriptions, good at writing website content, and master at creating ad copy plus researching and writing the articles.

Roles and Responsibilities:

•  should be good at writing post descriptions.
• Responsible for providing Reel Descriptions.
• Innovative in writing the video descriptions
• Good at writing website content.
• Perfect in providing the Ad copy. 

mandatory Skills:

•  Excellent communication skills
• Work Report Submissions
•  Team Player
•  Able to Handle Multitasking 
•  Should be Good at Training (Very Very Important) 
•  Good at Planning Strategies.

Role – SDET

Experience – 4+ years

Location - Bengaluru

Key Skills - API test automation, Java, Rest Assured

• Minimum 3+ years of API test automation experience

• Strong Programming experience on Java using OOPs, collections, exception handling, and strong debugging skills

• Strong testing and test design skills like scenario identification, test case identification, defect identification with a focus on test coverage

• Strong experience in testing of API / webservices

• Excellent experience and skill in the development of API test automation suites using Rest Assured

• Good experience of working on Jenkins and other CI-CD tools

• Knowledge of Dockers

• Strong knowledge of SQL and experience in database testing is desirable

• Good communication skills (verbal and written) is a must