Embedded developer

Key Responsibilities

• Maintain and enhance the Yocto BSP for the TechNexion PICO-IMX6 DualLite (NXP i.MX6) platform.
• Assess and execute migration from Yocto Zeus to a newer LTS release (e.g., Dunfell/Kirkstone).
• Integrate stable Linux kernel patches from NXP and mainline.
• Optimize system boot time, startup sequence, and overall performance.
• Remove unnecessary services and packages to reduce image footprint.
• Update and stabilize the Bluetooth stack (BlueZ and firmware).
• Optimize Linux kernel configuration, power management, and CPU tuning.
• Debug CPU, memory, storage, and I/O performance issues.
• Maintain Yocto layers, build process, and technical documentation.
• Define and maintain eMMC/SD storage layouts for boot, rootfs, data, and update partitions.

Required Skills

Mandatory

5+ years of Embedded Linux development experience.

2+ years of hands-on Yocto Project experience.

Strong expertise in:

• Yocto (recipes, meta-layers, BitBake, bbappend)
• Linux kernel configuration and patching
• NXP i.MX6 or similar embedded platforms
• Systemd optimization and boot profiling
• Embedded Linux debugging (dmesg, perf, ftrace, systemd-analyze)
• BlueZ and Bluetooth bring-up
• Cross-compilation, toolchains, and Git workflows

Preferred

• Yocto LTS migration experience.
• U-Boot optimization.
• Embedded power optimization.
• Secure Boot and OTA update concepts.
• Exposure to Qt-based embedded systems.

Key Deliverables

• Optimized and maintainable Yocto BSP.
• Reduced system boot time.
• Lean system image with redundant services removed.
• Stable Bluetooth stack with updated patches.
• Updated Linux kernel with critical fixes.
• Documented Yocto layers and build process.
• Migration plan for the latest Yocto LTS.
• Defined storage partition layout for deployment.

Experience: 5+ Years in Embedded Linux (Minimum 2+ Years with Yocto)

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

Senior Embedded Software Engineer – U-boot, Linux Kernel & Device Drivers

Company Name: SAS One Pvt Ltd (www.sasone.in)

Location: Bengaluru, India

Experience: 6+ years

Job Summary:

We are looking for a highly skilled Senior Embedded Software Engineer experienced in Embedded C development, Linux Kernel programming, and Device Driver design. The ideal candidate will contribute to low-level software development for embedded systems, working closely with hardware teams to design, implement, and optimize drivers and kernel modules for next-generation platforms.

Key Responsibilities:

• Design, develop, and debug embedded software in C for SoM(System On Modules).
• Develop and maintain board support packages (BSPs), bootloaders, and low-level firmware.
• Work on real-time performance optimization, memory management, and inter-process communication.
• Develop and maintain Linux kernel modules and device drivers for various peripherals (I2C, SPI, UART, GPIO, USB, PCIe, HDMI, etc.).
• Collaborate with hardware engineers for bring-up, debugging, and validation of new boards.

Required Skills & Experience:

• Bachelor’s or Master’s degree in Electronics, Computer Engineering, or related field.
• 6+ years of hands-on experience in embedded software development.
• Strong proficiency in Embedded C.
• Deep understanding of Linux Kernel internals, device driver architecture, and hardware software interaction.
• Familiarity with ARM architecture, SoC bring-up, and YOCTO environments is a plus.
• Strong debugging and analytical skills, with the ability to work independently in fast-paced environments.

Preferred / Good-to-Have Skills:

• Exposure to Yocto Project, U-Boot, and bootloader customization.
• Experience with embedded Linux distributions or open-source contributions.
• Understanding of hardware schematics and signal analysis (oscilloscope, logic analyzer).

    Requirement analysis

·         Acquisition support (Technical analysis)

·         Automotive ECU software development

·         Diagnostic (UDS) function development

·         Software testing

·         Technical collaboration with internal/external development parties

Key Responsibilities:

1.    Development, integration and testing of embedded software in the Embedded Linux RTOS

2.    Integrate Application based on Adaptive AUTOSAR Platform

3.    Contribute for Architecture, Detailed design, programming in C++ (11/14/17)

4.    Perform Unit, Integration Tests of developed Application

5.    Detail oriented systematic problem-solving approach in the embedded software.

6.    Debug embedded software on hardware platforms for issue identification and resolution

Minimum qualification criteria:

1.    Bachelor's degree in Electronics, Computer Science, Electrical Engineering, or related field

2.    2+ years of experience in software development in C or C++

3.    2+ years of experience in designing and implementing embedded systems for high performance, high reliability real-time embedded computing platforms

Role and Responsibility:

 Developing firmware for robust embedded system devices

 Active involvement in designing architecture, communication protocols & selection of technology.

 Designing test cases and active participation in testing

 Team building and grooming new members.

Candidate Skill Set:

 Thorough knowledge and hands on experience of Embedded C programming.

 Experience of firmware development on multiple microcontroller families like AVR, MSP430, STM32,

Renesas, etc.

 Strong programming & debugging skills.

 Knowledge of IDE’s like Keil, AVR Studio, IAR, Cubesuit will be an added advantage.

 Hands on experience of working on wireless communication (BLE, Wi-Fi, Zigbee, LoRa, GSM/ GPRS)

Qualification:

 A team player with excellent analytical, problem-solving skills, with strong ability to quickly learn.

 Passion for developing products with new technologies.

 Bachelor's/ master’s degree in electronics related discipline or equivalent experience

 Experience of 1-3 years

Dear All Automotive professionals, Global Tech Infosolutions currently hiring for multiple positions.

We are looking for a professional Embedded Developer for Pune/Bangalore to execute a complete embedded software development lifecycle.

Requirement:

Must have 2 to 5 years of experience in the Automotive domain.

Bachelor's degree in Electronics Engineering or computer science.

Experience in writing software for embedded controllers 16/32-bit MCUs like Freescale, and Renesas (RL78/ RH850x).

Must have programming experience in Embedded C (i.e., experience in multi-threading, understanding of variable scopes, pointer operations and following general coding guidelines

Designing and implementing software for embedded devices and systems

Designing, developing, coding, testing, and debugging system software

Working experience on Communication Protocols like CAN 2.0, CAN FD,

Understanding of J1939, UDS, BLE.

Working experience on low-level device drivers like UART, I2C, SPI, CAN

Skills:

Knowledge of Key Peripherals: USB Ethernet Bluetooth, PCIe, CAN, SPI, I2C & UART TIMERS

CAN, Microcontroller Microprocessor

Team player

Able to articulate issues/fix and participate in discussions

#Apply now

Location- Pune (on-site)

#automotivejobs #automotivecareer #GThiring #Punejobs #bangalorejobs #embeddeddevelopers

• Strong C/C++ programming hands on experience
• Should have work experience on firmware development with strong Linux internals.
• Very good development, design and debugging experience on embedded firmware.
• Added advantage to have experience on Systems management/Out of Band/BMC domain experience
• Good to have automation experience using Python or shell scripting  
• Excellent communication and problem solving skills  
• Experience on tools like JIRA, Yocto, Visual studio, etc.

Automotive Embedded Developer

Experience: 3-8 Years
Location: Bangalore, Hyderabad, Chennai, Pune, Thiruvananthapuram, Calicut
Company: Tata Elxsi

Skills : Embedded C, CAN Protocol, Vector Tools, Aspice. Design and Development of ECU 

* Experience in C/C++ and have strong experience embedded application development and integration in Linux

* Good in creating unit tests, performing code reviews, optimizing performance and ensuring standards for maintainability  

* Debugging, profiling, and performance optimization skills