Embedded Software

Role Overview

The Embedded Firmware Engineer will be responsible for development, testing, debugging, and maintenance of embedded firmware for EV Charger and IoT-based products using ESP32 platforms. The role involves working closely with hardware, cloud, mobile application, and testing teams to develop reliable and production-ready embedded solutions.

The candidate should have strong hands-on experience in Embedded C programming, ESP-IDF framework, RTOS-based firmware development, peripheral interfacing, communication protocols, and debugging of embedded systems. Knowledge of EV charging systems, charger communication protocols, and industrial embedded product development is highly preferred.

Key Responsibilities

• Develop embedded firmware in C for ESP32-based embedded systems.

• Work extensively on ESP-IDF framework for application development.

• Design modular, reusable, and scalable firmware architecture.

• Develop low-level drivers and middleware for embedded peripherals.

• Implement multitasking applications using FreeRTOS.

• Optimize firmware for performance, memory utilization, stability, and low power operation.

• Perform firmware integration with hardware modules and external systems.

• Develop and debug firmware for UART, SPI, I2C, CAN, GPIO, ADC, PWM, Ethernet, Wi-Fi, BLE, RS485, and Modbus communication.

• Interface embedded systems with energy meters, display modules, RFID modules, relays/contactors, sensors, and communication modules.

Embedded Systems / Firmware Engineer

Key Responsibilities

• Develop embedded firmware for IoT and connected devices using C/C++.
• Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
• Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
• Work with Python and Shell scripting for development and automation.
• Apply basic AI/ML and computer vision concepts to embedded applications.
• Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.

Required Skills

• C, C++, Python, Shell Scripting
• Embedded Systems & Firmware
• IoT, RTOS, Bare Metal
• Memory Management & Device Drivers
• Communication Protocols
• Camera, Motor & Vision Systems
• Basic AI/ML understanding
• Electrical & Mechanical Design understanding

Greetings from Skoegle IoT Innovations Pvt Ltd 

Job Summary

We are looking for an experienced Embedded Firmware Engineer with expertise in embedded systems, firmware architecture, RTOS, and embedded software development for IoT, wearable, automotive, industrial, and medical-grade products.

Key Responsibilities

• Design, develop, debug, and maintain firmware in C, C++, and Embedded C.

• Develop firmware for ESP32, nRF52832/52840, ATmega328P, and Raspberry Pi platforms.

• Integrate sensors using I2C, SPI, UART, ADC, GPIO, PWM, CAN, and USB.

• Develop RTOS and bare-metal firmware.

• Implement BLE, GSM/4G, GPS/GNSS, LoRa, Wi-Fi, NFC/RFID communication.

• Design bootloaders, OTA updates, and secure firmware upgrades.

• Optimize power consumption, sleep modes, memory allocation, and performance.

• Develop sensor drivers, calibration routines, and medical-grade firmware.

• Program bare ICs and support PCB bring-up, pin selection, and hardware validation.

• Support HTTP/HTTPS GET/POST/PUT APIs and embedded networking.

Required Skills

• Embedded Systems and Embedded Software Development

• C, C++, Embedded C

• RTOS, Bare-Metal Programming

• Operating Systems fundamentals

• I2C, SPI, UART, Digital & Analog Signals

• Sensor Integration

• Arduino IDE, VS Code, SEGGER Embedded Studio, J-Link

• ESP32 Series, nRF52832/52840, ATmega328P, Raspberry Pi

• BLE (UUIDs), GSM (band configuration), GPS, LoRa

• Python, HTML, HTTP/HTTPS

• Bootloader Development, OTA, Power Optimization

• Memory Allocation, Sleep Modes, Sensor Calibration

• Machine Learning on Embedded Systems (preferred)

IoT Engineer – Telematics & C#/.NET

Experience :05+ Years

Location : Ahmedabad

ABOUT MYFMS

MyFMS is Micpoint B.V.'s SaaS platform for fleet, facility, and access management, built on .NET and C#, and hosted on our own private cloud in the Netherlands, spread across two data centers. A key part of MyFMS is its connector layer: the software that links telematics and IoT hardware in the field (such as GPS trackers and CAN-bus interfaces) to the platform. To further build out and standardize this layer, we're looking for an IoT Engineer with C#/.NET development experience.

WHAT YOU'LL DO

•    Implement and maintain telematics integrations in C#/.NET on MyFMS's connectors, which link telematics hardware (e.g. GPS trackers and CAN-bus interfaces) to the platform.

•    Investigate which configurations, protocol settings, and command sets of supported hardware (e.g. CAN/LVCAN parameters) can serve as a standard, and document them.

•    Research and manage firmware versions for telematics devices, and advise on firmware updates and compatibility.

•    Translate device-specific protocols into a uniform, reusable data structure within the platform.

•    Document device configurations and firmware standards in Markdown for the development team and support organization.

•    Work according to our DevOps way of working, integrating your work into the CI/CD pipelines we use for testing and releases.

•    Collaborate with the (international) development team on the architecture of the connector layer and contribute to the technical roadmap.

•    Support troubleshooting of field issues, such as connectivity or synchronization problems with hardware.

•    Build simulators for telematics hardware, so protocols, configurations, and firmware behavior can be tested without needing physical devices.

•    Use AI, and work with and train models, to build simulations and test setups.

•    Ensure the connector integrations are fully testable (including unit and integration tests), safeguarding the quality of the telematics integrations.

WHAT THE ROLE REQUIRES

•    Bachelor's/Master's level thinking and working ability in a technical field, e.g. Electrical Engineering, Embedded Systems, Computer Science, or similar.

•    Demonstrable experience with software development in C#/.NET.

•    Affinity with or experience in IoT/telematics hardware, such as GPS trackers, CAN-bus interfaces, and sensors.

•    Experience with Ruptela, Teltonika, and Digital Matter hardware is a plus.

•    Knowledge of communication protocols such as CAN, LVCAN, OBD-II, MQTT, and/or TCP/IP is a plus.

•    Experience reading, configuring, or updating firmware on embedded devices is a plus.

•    Experience building test or simulation tools (e.g. device or protocol simulators) and with test automation (unit/integration tests) is a plus.

•    Experience with DevOps practices and CI/CD pipelines (incl. Azure DevOps) is a plus.

•    Affinity with AI/machine learning, for example training models for simulations and test setups, is a plus.

•    You're analytical and structured: you enjoy bringing order to a wide range of device configurations and documenting what you find.

•    You value quality assurance and structurally build testability into your own work.

•    You're proficient in English, spoken and written (the team's working language); Dutch is not required.