11+ Telecommunications billing Jobs in India

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Position: Computer Vision Engineer

Experience: 2–3 Years

Location: Bengaluru, Karnataka

Employment Type: Full-time

About the Role

We are seeking a highly motivated Computer Vision Engineer to join our autonomy and avionics team. The role involves developing, implementing, and validating computer vision models and algorithms and pipelines for UAVs operating in both GNSS-available and GNSS-denied environments.

The ideal candidate should have a strong foundation in theory of deep learning and machine learning, strong understanding of electromagnetic spectrum, imaging fundamentals, camera principles, and mathematical concepts with hands-on experience in implementing these algorithms on embedded or real-time systems.

Key Responsibilities

• Design, develop, and optimise AI Models
• Make custom CNNs/ modify existing CNNs to suit specific problems at hand
• Handle end-to-end training flow
• Implement end to end inference pipelines on standard PCs as well as on embedded systems
• Understand performance benchmarks and assess the accuracy and inference times
• Implement traditional image processing algorithms
• Factor the code to leverage underlying hardware architecture
• Prune the networks for efficiency
• Integrate the system within the application framework using C++
• Work closely with perception, controls, embedded software, and systems engineering teams.

Required Qualifications

• B.E./B.Tech/M.E./M.Tech in Computer Science and Engineering, Electronics, ECE, Mechatronics, or a related discipline.
• 2–3 years of experience in relevant area
• Strong understanding of: Linear Algebra, Probability and Statistics, AI-ML-DL fundamentals, Image processing, Camera Functioning
• Strong programming skills in C++ and Python.
• Experience with MATLAB for algorithm development and validation.
• Familiarity with Linux development environments.
• Experience with Git version control.

Preferred Skills

• Experience with Camera, IMU Calibration and Synchronisation
• Experience with multi-sensor fusion.
• Experience working with NVIDIA devices
• Experience on FPGA will be an added advantage
• Full understanding of Git functionality
• Exposure to airborne software development processes and coding standards (e.g., MISRA C++).

Personal Attributes

• Strong analytical and problem-solving skills.
• Ability to work independently on challenging technical problems.
• Good communication and documentation skills.
• Passion for solving challenging problems
• Willingness to participate in field trials and flight testing.
• Team playwe

Senior Embedded Software Engineer – U-boot, Linux Kernel & Device Drivers

Company Name: SAS One Pvt Ltd (www.sasone.in)

Location: Bengaluru, India

Experience: 6+ years

Job Summary:

We are looking for a highly skilled Senior Embedded Software Engineer experienced in Embedded C development, Linux Kernel programming, and Device Driver design. The ideal candidate will contribute to low-level software development for embedded systems, working closely with hardware teams to design, implement, and optimize drivers and kernel modules for next-generation platforms.

Key Responsibilities:

• Design, develop, and debug embedded software in C for SoM(System On Modules).
• Develop and maintain board support packages (BSPs), bootloaders, and low-level firmware.
• Work on real-time performance optimization, memory management, and inter-process communication.
• Develop and maintain Linux kernel modules and device drivers for various peripherals (I2C, SPI, UART, GPIO, USB, PCIe, HDMI, etc.).
• Collaborate with hardware engineers for bring-up, debugging, and validation of new boards.

Required Skills & Experience:

• Bachelor’s or Master’s degree in Electronics, Computer Engineering, or related field.
• 6+ years of hands-on experience in embedded software development.
• Strong proficiency in Embedded C.
• Deep understanding of Linux Kernel internals, device driver architecture, and hardware software interaction.
• Familiarity with ARM architecture, SoC bring-up, and YOCTO environments is a plus.
• Strong debugging and analytical skills, with the ability to work independently in fast-paced environments.

Preferred / Good-to-Have Skills:

• Exposure to Yocto Project, U-Boot, and bootloader customization.
• Experience with embedded Linux distributions or open-source contributions.
• Understanding of hardware schematics and signal analysis (oscilloscope, logic analyzer).

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

Embedded Software - Linux 

Job Responsibilities: 

Linux development engineer working on microcontroller firmware development, Linux platform drivers and IoT solutions. Should be able to resolve technical roadblocks and deliver project commitments. Looking for someone with 2+ years in the embedded industry and a passion to grow along with the company. 

Selected candidates for this role will be reporting to the software tech lead/manager in the organization. 

• Embedded software development activities and Linux platform development.
• Work with QA teams to resolve bugs and ensure release readiness 

The main responsibilities of this role are: 

Technical: 

• Strong programming skills (C, C++, assembly) 
• Linux development experience (porting & platform drivers) 
• Knowledge of embedded microcontroller & microprocessor-based systems 
• Prior experience of delivering modules for microcontroller projects 
• Good understanding of commonly used embedded communication protocols 
• Good understanding of common embedded peripherals, interfaces & sensors 
• Experience working on Real-Time systems (RTOS) 
• Should be able to quickly learn new technologies.
• Should be able to work with minimal technical guidance 

Leadership: 

• This role requires excellent communication skills 
• Strong analytical & problem-solving skills 
• Prior experience working with overseas clients 
• Periodically report progress to manager.

Experience: 2 to 4 years

Key Responsibilities:

1.    Development, integration and testing of embedded software in the Embedded Linux RTOS

2.    Integrate Application based on Adaptive AUTOSAR Platform

3.    Contribute for Architecture, Detailed design, programming in C++ (11/14/17)

4.    Perform Unit, Integration Tests of developed Application

5.    Detail oriented systematic problem-solving approach in the embedded software.

6.    Debug embedded software on hardware platforms for issue identification and resolution

Minimum qualification criteria:

1.    Bachelor's degree in Electronics, Computer Science, Electrical Engineering, or related field

2.    2+ years of experience in software development in C or C++

3.    2+ years of experience in designing and implementing embedded systems for high performance, high reliability real-time embedded computing platforms

Relevant Experience: 2-5 years

The position is responsible to carry out product design, tests and other related activities as allocated. Working as a member within the current hardware engineering team, who collectively execute all the necessary activities to design, improve and optimize customer projects and production - especially the reliability and robustness aspects.

Requirements:

1. Graduate in Electronic Engineering or equivalent Minimum 3-5 years working experience in a similar industry Self-driven individual with hands-on skills.
2. Experience of Embedded Electronic Digital, Analog, Power electronic design.
3. Familiarity with ECAD tools for schematic capture, simulation, component selection, PCB design.
4. Experience of design for EMI/EMC.
5. Create manufacturing deliverables for prototypes and production.
6. Application of Design for Manufacturability (DFM) and Design for Testability (DFT) techniques.
7. Experience of debugging and fault finding in new and existing designs.
8. Experience of failure analysis and design review.
9. Experience with tools like Cadence or ORCad.
10. Creation of RFQ package for EMS provider and qualification of offers.
11. Experience of project/task planning.
12. Knowledge of project management tools.
13. Well versed with usage of test equipment like Multimeter, Oscilloscope and maintenance of laboratory equipment.
14. Familiarity with EMI, EMC, Environmental, Mechanical standards and type tests.

Role & Responsibilities

• Strong proficiency in C++ with minimum 2 years of Development
• Knowledge of the STL, containers, algorithms and data
• Good understanding on Design patterns and memory
• Familiarity with debugging tools, such as Valgrind, winDBG, WireShark is an additional advantage.

Desired Experience

• (2-6 Years) of Experience as C++ Developer