11+ SFC Jobs in India

Role: Senior PLC Developer

Location: Pune

Experience: 3-7 years

About company:

Requisimus is Germany headquartered, IT consulting and service organization. With over 25 years of expertise and global presence, we are committed to customer excellence and focused in addressing niche areas of product engineering, process consulting and software development in automotive, railways, production automation, data management and business IT domains.

Job Summary

We are seeking a skilled and proactive PLC engineer with good aptitude in programming.

Candidate should be flexible to work on PLC and eager to learn Embedded software in future.

Key Responsibilities:

• Strong PLC programming skills in Functional Block Diagram, Ladder Programming, Structured Text and SFC

• Good knowledge of UML diagrams

• Good understanding of Communication protocols over Ethernet.

Good to have:

• Good Communication Skills and Exposure to international customer.

• Experience or knowledge in Software version control tools eg. Git, SVN, etc.

• Eager to learn Embedded C, Firmware development, etc.

• Providing solutions to issues related to the connection of networks and platforms

Job Details

- Job Title: Sr. System Test Engineer

- Industry: engineering

- Domain - Information technology (IT)

- Experience Required: 6-10 years

- Employment Type: Full Time

- Job Location: Pune

- CTC Range: Best in Industry

Job Description

• Designation- Sr. System Test Engineer
• Qualifications: B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical
• Experience: 6-10 years.
• Location: Pune.
• Work Mode: Hybrid (1-day WFH, 4-days from Office)

A. Skills & Technologies:

Mandatory:

• PLC Programming in Ladder/Structured Text/Function blocks.
• Configuring and commissioning Servo Drives, VFDs & Inverters.
• Experienced in Motion Control Programming in PLC for servo drives.
• Experience in Robotic (Drive Groups, Multi-Axes) programming in PLC.
• Design and Commissioning experience for Machine automation and turnkey projects,
• (including but not limited to Factory Acceptance Test (FAT) / Site Acceptance Test (SAT)).
• Hands On with one or more Fieldbus technologies (like Ethernet/IP, PROFINET,
• EtherCAT, Ethernet PowerLINK, CAN, PROFIBUS, ControlNET, DeviceNET).
• Configuring of PLC Backplane IOs and Remote IOs on Fieldbus.

Desirable:

• Electrical Wiring Design for Control panels.
• Experience in Manual testing.

B. Behaviors:

• Good team player
• Open to learn new technologies.
• Agile in nature
• Self-motivated and proactive

C. Role and Responsibilities:

• Design and execute tests on complete automation system.
• Test motion, robotics related Function blocks in PLC code, before release to market.
• Analyze requirements, design PLC programs, write and execute system tests.
• Follow required test processes as defined by Lead/Manager.

Must-Haves

6years of Hands‑on experience in PLC programming.

6years of Hands‑on experience in configuring and commissioning Servo Drives and VFDs.

6years of Hands‑on experience in motion control programming in PLC for servo drives.

Good communication skills.

A strong “can‑do” attitude.

Willingness to learn.

Ability to work effectively in a team.

Bachelor's degree - B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical

Minimum of 2years of stability with each company

*******

Notice Period: Immediate to 30days.

Job Details

- Job Title: Sr. System Test Engineer

- Industry: engineering

- Domain - Information technology (IT)

- Experience Required: 6-10 years

- Employment Type: Full Time

- Job Location: Pune

- CTC Range: Best in Industry

Job Description

• Designation- Sr. System Test Engineer
• Qualifications: B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical
• Experience: 6-10 years.
• Location: Pune.
• Work Mode: Hybrid (1-day WFH, 4-days from Office)

A. Skills & Technologies:

Mandatory:

• PLC Programming in Ladder/Structured Text/Function blocks.
• Configuring and commissioning Servo Drives, VFDs & Inverters.
• Experienced in Motion Control Programming in PLC for servo drives.
• Experience in Robotic (Drive Groups, Multi-Axes) programming in PLC.
• Design and Commissioning experience for Machine automation and turnkey projects,
• (including but not limited to Factory Acceptance Test (FAT) / Site Acceptance Test (SAT)).
• Hands On with one or more Fieldbus technologies (like Ethernet/IP, PROFINET,
• EtherCAT, Ethernet PowerLINK, CAN, PROFIBUS, ControlNET, DeviceNET).
• Configuring of PLC Backplane IOs and Remote IOs on Fieldbus.

Desirable:

• Electrical Wiring Design for Control panels.
• Experience in Manual testing.

B. Behaviors:

• Good team player
• Open to learn new technologies.
• Agile in nature
• Self-motivated and proactive

C. Role and Responsibilities:

• Design and execute tests on complete automation system.
• Test motion, robotics related Function blocks in PLC code, before release to market.
• Analyze requirements, design PLC programs, write and execute system tests.
• Follow required test processes as defined by Lead/Manager.

Must-Haves

6years of Hands‑on experience in PLC programming.

6years of Hands‑on experience in configuring and commissioning Servo Drives and VFDs.

6years of Hands‑on experience in motion control programming in PLC for servo drives.

Good communication skills.

A strong “can‑do” attitude.

Willingness to learn.

Ability to work effectively in a team.

Bachelor's degree - B.E./B.Tech Electrical / Instrumentation / Electronics / Mechatronics / MSc Electronics, Electrical

Minimum of 2years of stability with each company

*******

Notice Period: Immediate to 30days.

 Internship Opportunity – Embedded Systems & IoT

Join our hands-on internship program designed for engineering students passionate about core tech. You'll work on real-time projects involving microcontrollers, sensors, RTOS, circuit design, and IoT protocols.

Gain exposure to AI-integrated embedded applications and build a strong project portfolio with mentorship and placement support.

Location: Bangalore (Hybrid/On-site)

Duration: 2–3 months

Eligibility: Final-year students and pre final year (ECE/EEE/CSE/Mechatronics)

#EmbeddedSystems #IoTInternship #EngineeringInternship #CoreTechCareers #Microcontrollers #RTOS #PCBDesign #IoTProjects #KnowxInnovations #AIoT #TechInternship #SkillDevelopment #HandsOnLearning #BangaloreInternship #StudentInternship

• Design, implement, and test production- grade core robotic software components possibly  including perception systems, motion planning systems, or command and control systems. • Design, implement, and test software integration components with other robotic platforms and  warehouse management systems 
• Design, implement, and test customer- specific software components 
• Develop testing frameworks and support testing for core software components • Develop logging and data analytics systems for deployments 
• Follow production- level code design and development processes including detailed  documentation, code reviews, and structured release processes

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

• Firmware Design and Development experience on different micro-controllers.
  
• C/C++ programming
  
• Linux Commands Operating System Concepts
  
• board bring up, embedded software, Kernel Build, Yocto
  
• Shell scripting Networking Concepts Openwrt OS Concepts
  
• Must have good Communication and Presentable skills.
  
• Experience on any Wifi, Bluetooth, GSM modules is a plus.
  
• Design, develop, code, test and debug system software.
  

Roles and Responsibilities:

• PLC programming. Scada screens to coordinate with the client and Manufacture the PLC panel.
• Pre-Order Support for Bidding and Finalize the BOM & Scheme.
• Review Project Specification / Customer Specification and Prepare the Critical Points.
• Design Review to be performed for Key documents before release the drawings to Client.
• Deviation or Additional requirements to be communicated to Client with Sales in the loop.
• On-time Material Ordering with the Purchase department.
• Ensure all Specifications are followed in the Panel Construction / Bill of materials

Desired Skills

• Siemens PLC programming and commissioning experience in S7-400FH series.
• PLC, HMI, SCADA, AC/DC Drives & Servo drives from PLC / HMI / Servo / Vision Systems.
• Experience (above 3 yrs).
• UG : Tech /B.E /Diploma. in EEE, E& I, ECE
• Salary – 20K to 50K

You would be part of:

1. Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
2. Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
3. Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
4. Writing Applications and Drivers from the scratch for (embedded)linux based systems.
5. Scripting and automations around work flows of UAS usage.
6. Working with existing sophisticated software stacks of subcomponents of UASs.
7. Working closely with electronics, design and systems teams for architecture development and deployment.
8. Working closely with Flight Controller engineers to do collaborative development of UAVs.

We expect you to be:

1. Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
2. Very good in analytical abilities to be able to do core research and development activities.
3. Able to write low level drivers (wrapper or core) from the scratch.
4. Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
5. Able to understand existing complex embedded software stack written in C/C++.
6. Solid in C.
7. Good in C++.
8. Comfortable with using hardware debuggers.
9. Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
10. Having Solid understanding of interrupt mechanisms.
11. Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
12. Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
13. Having Good understanding of the concept of bootloaders.
14. Able to multitask.
15. A self-motivated and motivating personality who can work well independently as well as part of a team
16. Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude

You are awesome if you are:

1. Experienced in Linux Device Driver development.
2. Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
3. Experienced in data filtering techniques (Example: Kalman filter)

Summary:

The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams. 

Responsibilities:

• Design and build embedded systems, including embedded system firmware
• Test and debug the systems
• Monitor and maintain the system after development
• Improve system efficiency and stability after development
• Collaborate with customers to create systems based on their needs

Requirements:

• Minimum of a bachelor's degree in computer science or engineering
• Professional experience in embedded systems
• Significant programming experience in C or C++
• Experience in trouble-shooting embedded systems and microcontroller peripherals
• Experience in working in real-time operating systems
• Experience in interfaces, IP protocols, and hardware subsystems
• Proficiency in working with common embedded systems communication protocols
• Strong interpersonal and writing skills
• Ability to work as part of a team
• Exceptional analytical and problem-solving skills
• Self-motivated and passionate about your work and embedded systems
• Always eager to learn and improve