11+ EMI Jobs in India

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

Role: Software Developer

Employment Type: Full Time

Location: Gurugram, India

Educational Qualification: BE/BTech/ M.Tech / MS in Software Engineer

Work Experience: 6-8+ years of relevant work experience

Role Description:

Design and develop software for satellite systems, including onboard flight software and ground segment applications, ensuring reliability and real-time performance. Collaborate with hardware, AOCS, and mission teams to implement, test, and integrate software across the mission lifecycle. Support verification, validation, and in-orbit operations for robust and mission-critical performance.

Responsibilities & Duties:

• Design, develop, and maintain onboard flight software (FSW) and ground segment applications for satellite missions
• Develop real-time, embedded software for spacecraft subsystems (AOCS, EPS, payload, communication)
• Implement software in languages such as C/C++, Python, and embedded C for high-reliability systems
• Design software architecture, modules, and interfaces aligned with system requirements and mission objectives
• Develop drivers and low-level firmware for hardware interfaces (SPI, I2C, UART, CAN, SpaceWire, Ethernet)
• Work with real-time operating systems (RTOS) such as FreeRTOS or equivalent
• Implement communication protocols for telemetry, telecommand, and data handling
• Collaborate with hardware, AOCS, RF, and systems teams for seamless hardware-software integration
• Develop simulation tools, test scripts, and automation frameworks using Python or MATLAB
• Perform software verification and validation (V&V), including unit testing, integration testing, and system testing
• Develop and execute Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) test environments
• Perform code reviews, static analysis, and debugging to ensure reliability and performance
• Optimize software for real-time performance, memory usage, and fault tolerance
• Implement fault detection, isolation, and recovery mechanisms
• Support integration, system testing, and environmental testing (EMI/EMC, thermal vacuum, vibration)
• Develop and maintain technical documentation (design documents, interface control documents, test reports)
• Participate in design reviews (SRR, PDR, CDR, TRR) and technical discussions
• Support launch operations, commissioning, and in-orbit software updates and anomaly resolution
• Utilize version control and collaboration tools such as Git
• Work within structured development processes (Agile/Waterfall/Sprint) and configuration management systems
• Troubleshoot software and system-level issues and perform root cause analysis

Desirable Skills & Certifications:

• Strong proficiency in C/C++ and Python for embedded and system-level software development
• Experience with real-time operating systems such as FreeRTOS or equivalent RTOS platforms
• Familiarity with spacecraft communication protocols (UART, SPI, I2C, CAN, SpaceWire, Ethernet) and telemetry/telecommand systems
• Experience in Software-in-the-Loop (SIL), Hardware-in-the-Loop (HIL), and simulation-based verification
• Knowledge of space software standards and practices (ECSS, NASA, ISRO, MISRA C guidelines)
• Proficiency in version control and development workflows using Git and CI/CD practices
• Understanding of embedded systems, firmware development, and hardware-software integration

EMI Solutions Private Limited

Job Description: Operational Manager

· Oversee end-to-end plant operations.

· Ensure smooth EMI filter manufacturing and all the processes.

· Drive production planning and ensure achievement of daily, weekly, and monthly targets.

· Control and improve process stability by monitoring critical parameters affecting product performance.

·  Manage procurement activities for raw materials, components, and consumables ensuring timely availability.

·  Ensure cost-effective purchasing while maintaining quality and vendor performance standards.

· Control stores operations including inventory management, stock accuracy, and material flow to production.

· Daily reviews for reducing downtime, rejection, process variation, and material delays.

· Lead root cause analysis (RCA) for production, process, and material-related issues.

· Implement CAPA across all operational areas and ensure effective closure.

· Coordinate with engineering and quality teams for process improvement and product compliance.

· Monitor all the KPIs of all the departments.

· Review daily operational reports (production, inventory, procurement) and take corrective actions.

Qualification

· Bachelor’s Degree in Electrical Engineering (Mandatory)

Experience

• Minimum 15 years in electrical / electronic manufacturing industry
• Proven experience in handling Production, Process, Procurement, and Stores

Key Skills

• Production and operations management
• Procurement and vendor management
• Inventory and stores management
• Root cause analysis (8D, 5 Why, Fishbone) and Lean Manufacturing.
• CAPA implementation and Cross functional leadership.

KPIs (Performance Metrics)

1. Overall production achievement and efficiency
2. Reduction in rejection and process variation
3. Inventory accuracy and stock turnover ratio
4. Procurement cost savings and vendor performance
5. Material availability and zero line stoppage due to shortage
6. On-time delivery (OTD) performance
7. Reduction in operational cost per unit
8. CAPA effectiveness and closure rate.

Job Description: 

We are looking for a Hardware Design Engineer (5–8 years) to join our core engineering team. The role involves end-to-end ownership of embedded hardware design, including schematics, component selection, library creation, and guiding PCB layout through fabrication in collaboration with PCB teams. The ideal candidate should have strong communication skills, a practical understanding of real-world systems, and the ability to work closely with cross-functional teams. 

We are looking for a serious, long-term professional who is passionate about hardware design and willing to take full ownership of product development. 

Job Responsibilities:

• Design and develop end-to-end embedded hardware systems (analogue & digital) from concept to production 

• Architect and implement designs using MPUs/MCUs (i.MX, Sitara, STM32, Renesas) 

• Develop robust schematics, perform component selection, and ensure reliability, safety, and compliance considerations 

• Implement and integrate high-speed and industrial interfaces (DDR, Ethernet, USB, CAN, RS-485, SPI, I2C, UART) 

• Perform circuit simulations and design validation using tools like PSpice / LTSpice 

• Work closely with PCB layout engineers to: 

• Define stack-up and routing constraints 

• Ensure Signal Integrity (SI) and Power Integrity (PI) 

• Review and approve PCB layouts 

• Analyze schematics and design documents to guide PCB placement and routing strategy 

• Lead board bring-up, debugging, and root cause analysis 

• Use lab tools (oscilloscope, logic analyzer, etc.) for hardware validation and troubleshooting 

• Ensure DFM/DFT compliance and support manufacturing, assembly, and testing 

• Drive designs through prototype (PCBA), validation, and production readiness 

• Collaborate with firmware and mechanical teams for system-level integration 

• Participate in design reviews, risk analysis, and issue resolution

Required Skills:

• Strong expertise in analogue circuit design (power, filtering, protection, signal conditioning) 

• Solid experience in digital design using MCU/MPU-based system

• Hands-on experience with: 

o NXP i.MX / TI Sitara (MPU-based systems preferred)

o STM32 / Renesas microcontrollers 

• Proven experience in high-speed hardware design: 

o DDR memory interfaces 

o Ethernet, USB, and high-speed communication buses 

• Strong understanding of Signal Integrity (SI) and Power Integrity (PI) 

• Experience working with and guiding PCB design using: 

o Mentor Graphics Xpedition 

o Cadence Allegro o Altium Designer 

• Hands-on experience with simulation tools (PSpice, LTSpice) 

• Strong hardware debugging skills using: 

o Oscilloscope

o Logic analyzer

o Multimeter 

• Experience in board bring-up and hardware validation 

• Knowledge of DFM (Design for Manufacturing) and DFT (Design for Testability) 

• Exposure to EMI/EMC design practices 

• Experience in taking designs from schematic → PCB → PCBA → validation → production 

• Good understanding of hardware–firmware interaction and system integration 

• Strong problem-solving and root cause analysis capability.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Required Skills: Advanced Hardware Board Design Expertise, Signal Integrity, EMI/EMC & Design Analysis, Board Bring-Up & Troubleshooting, EDA Tools & Technical Documentation, Cross-Functional & Supply Chain Coordination

Criteria:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

Description

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycle.

• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.

• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.

• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.

• Completed at least two project from high-level design to final product level deployment.

• Capable of independently managing product’s schematic, design analysis DC Drop, Singal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.

• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.

• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.

• Skilled in preparing hardware design documentation, validation test planning, identify necessary test equipment, test development, execution, debugging, and report preparation.

• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.

• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.

• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.

• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Education Requirements: 

B. Tech / M. Tech (ECE/ CSE/ IT)

Experience - 10 to 12 Years

Hardware Engineering

• Design and optimize airframes (multi-rotor, fixed-wing, hybrid) using lightweight composites and advanced aerodynamics.
• Develop and integrate propulsion systems, payload modules, batteries, and custom PCBs.
• Implement sensor fusion systems (LiDAR, GPS, cameras, IMUs, radar, RF) for navigation and mapping.
• Ensure compliance with safety, EMI/EMC, thermal, and environmental standards.

Hardware Engineers

• B.E./M.E. in Aerospace, Mechanical, Electronics, or Robotics.
• 3 - 5+ years in UAV/robotics design and prototyping.
• Strong CAD & simulation skills (SolidWorks, CATIA, ANSYS).
• Hands-on experience with avionics, PCBs, propulsion, RF, and power systems.

Job Title

Hardware Engineer

Job Summary

We are seeking a Hardware Engineer to design, develop, and support low-power electronic hardware systems, from concept through production. The role involves schematic design, PCB layout, component selection, and collaboration with firmware and mechanical teams to deliver reliable and manufacturable hardware solutions.

Key Responsibilities

·        Design electronic circuits and develop schematics and PCB layouts

·        Select components based on performance, power, cost, and availability

·        Develop and review battery-operated designs

·        Ensure designs meet electrical, thermal, and reliability requirements

·        Support hardware bring-up, debugging, and validation

·        Prepare BOMs, Gerbers, and manufacturing documentation

·        Work closely with firmware, and testing team

·        Review and improve designs for DFM/DFA and production readiness

Required Qualifications

·        Bachelor’s degree in Electronics Engineering, Electrical Engineering, or related field

·        Strong understanding of analog and digital electronics

·        Experience with PCB design tools (Altium, KiCad, Eagle, or similar)

·        Familiarity with microcontrollers and embedded systems

·        Ability to read datasheets and apply reference designs

·        Basic knowledge of EMI/ESD protection and signal integrity

Preferred Qualifications

·        Experience with low-power or battery-operated hardware

·        Exposure to IoT devices, sensors, or communication modules

·        Experience supporting prototype to production transitions

·        Knowledge of manufacturing and testing processes

·        Ability to document designs clearly and professionally

Experience Level

·        2+ years

Soft Skills

·        Strong problem-solving skills

·        Ability to work independently and in cross-functional teams

·        Good communication and documentation skills