2+ DroneKit Jobs in India

1.Pre-Flight Inspection:

● Conduct thorough pre-flight checks on the drone, including battery levels, sensors, propellers, and GPS calibration.

● Ensure all firmware and software are up to date for both the drone and remote controller.

● Verify that the drone is in optimal operating condition, including payload attachments, if applicable.

2.Flight Planning:

● Plan the flight route based on mission objectives, considering factors like altitude, weather conditions, and airspace regulations.

3.Safe and Efficient Flight Operations:

● Monitor drone telemetry data during flight (e.g., battery level, GPS signal, altitude, and speed).

● Ensure real-time communication with ground personnel and provide situational updates as necessary.

4.Emergency Procedures:

● Be prepared to handle emergencies such as low battery, lost GPS signal, or malfunctioning sensors.

● Execute safe and controlled emergency landings if required.

5.Post-Flight Data Handling:

● Safely retrieve the drone and perform a post-flight inspection, checking for any damage or malfunctions.

● Offload data collected during the flight, ensuring secure storage and proper labeling.

● Provide a detailed flight report, documenting any issues, flight conditions, and mission outcomes.

Minimum Requirement’s :

● must be 18+

● Must have at least 50hrs Flying experience.

● Should have knowledge of basic photography to handle camera settings for manual mode.

● Should have good smooth hand manipulation control with camera moments.

● Can keep his control calm in panic situations.

● A drone pilot should be familiar with drone hardware and software, including drone flight controls, GPS systems, and camera setups.

● Can take rapid decisions (depending on situations)

DRONES - Engineers, developers - HARDWARE, SOFTWARE, AND DESIGN

Preferred experience - 1 - 5 years

You would be part of:

1. Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
2. Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
3. Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
4. Writing Applications and Drivers from the scratch for (embedded)linux based systems.
5. Scripting and automations around work flows of UAS usage.
6. Working with existing sophisticated software stacks of subcomponents of UASs.
7. Working closely with electronics, design and systems teams for architecture development and deployment.
8. Working closely with Flight Controller engineers to do collaborative development of UAVs.

We expect you to be:

1. Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
2. Very good in analytical abilities to be able to do core research and development activities.
3. Able to write low level drivers (wrapper or core) from the scratch.
4. Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
5. Able to understand existing complex embedded software stack written in C/C++.
6. Solid in C.
7. Good in C++.
8. Comfortable with using hardware debuggers.
9. Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
10. Having Solid understanding of interrupt mechanisms.
11. Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
12. Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
13. Having Good understanding of the concept of bootloaders.
14. Able to multitask.
15. A self-motivated and motivating personality who can work well independently as well as part of a team
16. Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude

You are awesome if you are:

1. Experienced in Linux Device Driver development.
2. Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
3. Experienced in data filtering techniques (Example: Kalman filter)
4. Knowledge in ML/AI
5. capabilities in understanding various drone sectors and adoption

DESIGN : AV/Drone design engineer

Basic Qualifications (Required Skills/Experience):

• Diploma, Bachelor Or Master degree in Mechanical, Aerospace, Aeronautical, Civil disciplines
• Fresher graduates shall be considered for this position based on skillsets and Merit
• 0-5 Years of relevant Work experience.
• Knowledge of structural design, mechanical design, material properties, awareness of Industry standards for structural and mechanical systems design.
• Knowledge of CAD Tools (CATIA, Solid work, Creo, Unigraphics /NX) for Modeling, Drafting & Model Based Definition is essential.
• Able to work under guidance with positive attitude and highest ethics.

Preferred Qualifications (Desired Skills/Experience):

• Good knowledge of New Product development process.
• Knowledge of basics of stress analysis.
• Basic understanding of aircraft and UAV/Drone.