Vulnerability Lead

Job Description :

Position Name: Network Software Developer

Experience: 4 to 8 Years 

Work Mode: Work from Bangalore office (near Bellandur) all 5 days. 

Mandatory: 

1. 4+ years of work experience in Networking domain. 
2. Highly proficient in C and Linux environment.
3. Experience in working on Linux based large code base. 
4. Hands-on experience in working OpenWrt based router firmware. 
5. Hands on experience with IP and lower layer networking protocols.

Great to Have: 

• Experience in working on Qualcomm and MediaTek chipsets. 
• Experience in Linux device drivers and device trees.
• Experience in creating and applying Linux kernel patches.

Junior System Administrator (VoIP/Telephony) / Telephony Engineer (Telecommunications)

No. of Positions - 1

We are looking for a Junior System Administrator (VoIP) / Telephony Engineer (Telecommunications) to join our Telebu's Communications engineering Team. The Telebuin will develop, implement and support IP Telephony related technologies including and not limited to IP Telephony, IVR platforms, Conferencing solutions, Voice engineering integration, Voice over IP (VoIP), Session Border Controllers (SBC), Session Initiation Protocol (SIP), WebRTC, and Public Switched Telephone Network (PSTN) gateways.

Responsibilities:

• Install & maintain Freeswtich and other SIP servers.
• Administration of SIP and Media Servers, Network/Protocol level debugging and testing, Contact center solutions, Troubleshoots and resolves complex problems.
• Provide IP Telephony and VoIP Subject Matter Expertise for Company and Company's managed service providers, manages 3rd party telecom carriers and providers.

Requirements:

• 3 years of hands-on industry experience in telecommunications
• Strong conceptualize knowledge and experience with telephony protocols like SIP, SDP, RTP, SRTP and audio/video codecs.
• In-depth working experience with Kamailio, Freeswitch, Any of the SIP stack (Sofia, reSIProcate, PJSIP, etc.), and Linux
• Experience in using the VoIP testing tools like Wireshark, VoIPMonitor, SIPp, SIPCapture, Homer etc.
• Strong understanding of implementing various network setups (Private VPNs, multi-zone secure connectivity etc)

Nice to have:

• Experience with virtualization/container related technologies (Xen, VMware vSphere / ESXi, Docker, Kubernetes)
• Hands on writing production quality code using any of the scripting languages like Python, Go, Erlang etc.
• Working knowledge in any NoSQL databases like MongoDB, Redis, Cassandra etc.
• Passionate about knowing everything about VoIP Protocol standards & related RFCs

Basic Qualification: BE / Btech Computer Science

Desirable Skills:

1.Software development using Embedded C, C++ with programming standards (MISRA)

2.Knowledge of bus systems, which are used in the automotive industry, like CAN, LIN, I2C, SPI, etc)

3.Software development processes –A-SPICE V-cycle

4.Experience with development of control units for the automotive industry, especially experience with the development based on AUTOSTAR basic software.

5. Experience in the automotive industry according to common development and parameterization tools (i.e. Vector CANoe).

6.Knowledge of standards for safety-critical software (ISO 26262) is a plus.

Job Responsibilities

Responsibilities for this position include, but are not limited to, the following.

Understand requirements and create low-level design using UML

Develop embedded software as per defined software requirements

Software integration & testing

Background & Skills

Education:

B.E/B. Tech/M.Tech/Master (Electronics/Telecommunications/Computers Science)OR equivalent

Experience & Attributes:

2-8 years’ experience in Embedded system software design, development, and testing.

Excellent communication skills, spoken and written English

Must have specialized knowledge :

·  Embedded C

·  Electronics

·  RTOS

·  Knowledge of Microcontrollers (RISC, CISC)

·  CAN Communication & Protocols like UDS, KWP2000, CANopen and J1939

·  MISRA standard - 2000/MISRA 2012

·  SDLC, Agile Scrum

·  Static analysis & Tools like LDRA or QAC or Vector cast

·  Change Management & Tools like JIRA/VSTS

·  Version control & Tools like SVN/GIT/Clearcase

·  Traceability management & Tools like Reqtify or equivalent

·  Design methodologies - like UML

·  Software Test Life Cycle

Specialized knowledge – Will be Preferred

·  Functional Safety life-cycle & Management - Applies to software design & development

·  Safety standards like - IEC-61508, ISO-26262, ISO-25119, ISO-13849

Key Tasks and Responsibilities

·  Software requirement specification writing

·  Creating design for assigned modules

·  Implementing the code for assigned requirements

·  Perform unit testing

·  Perform peer reviews or inspection of software work products

·  Support testing team on defect analysis

·  Adhere to Quality processes

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

• Firmware Design and Development experience on different micro-controllers.
  
• C/C++ programming
  
• Linux Commands Operating System Concepts
  
• board bring up, embedded software, Kernel Build, Yocto
  
• Shell scripting Networking Concepts Openwrt OS Concepts
  
• Must have good Communication and Presentable skills.
  
• Experience on any Wifi, Bluetooth, GSM modules is a plus.
  
• Design, develop, code, test and debug system software.
  

QUALIFICATIONS: B.E./ B.Tech. (Electronics/ Electrical/ Mechatronics/ Mechanical)

EMPLOYMENT: Permanent / Full Time

LOCATION: Ahmedabad

EXPERIENCE: 1 to 3 years within automotive industry / software development.

ROLES AND RESPONSIBILITIES

• Develop, Debug simulink/stateflow models according to functional, technical requirements, MAAB guidelines.
• Derive software requirements from system level requirements and establish bi-directional traceability within the models and generated code.
• Generate Code from developed models, generate test vectors, automate tests and document code reviews, test results.
• Automate the data exchange flow between MATLAB models, excel sheets, code testing using m-scripts.

SKILLS AND EXPERIENCE

• Experience in model based development and testing using Mathwork Tools such as MATLAB/Simulink, Stateflow, autocode generation tools Embedded coder or TargetLink.
• Good understanding of the Automotive software development cycle and tool chains
• Should possess a good understanding of C coding, m-scripting, with good debugging and software testing skills.
• Experience in developing MATLAB/ Simulink models from scratch for automotive applications.
• Should have experience in requirements management, and be able to write test cases from them.
• Experience in MBD testing such as MIL/ SIL/PIL.
• Good communication skills in English and Hindi Language.
• Experience in MATLAB verification and validation toolbox like Simulink Design Verifier, Simulink Test, Simulink Coverage is advantageous.
• Basic understanding of Control System Design and Electric Vehicles is a plus.

You’ll be our: Firmware Engineer

You’ll be based at: IBC Knowledge Park, Bengaluru

You’ll be Aligned with: Embedded Manager

You’ll be a member of: Vehicle Software

What you’ll do at Ather:

A successful candidate is expected to lead the Firmware development and integration effort for various Ather products and be responsible for qualifying and integrating FW at various stages with HW. Responsibilities include:

• Understanding requirements from different stakeholders and translating these to application features

• Writing high quality source code to program complete applications within deadlines

• Unit-testing code for robustness, including edge cases, usability, and general reliability

• Performing functional and non-functional testing

• Troubleshooting and debugging applications

• Designing creative prototypes according to specifications

• Evaluating existing applications to reprogram, update and add new features

• Developing technical documents and handbooks to accurately represent application design and code

• Identifying and communicating possible risks along with preventive and corrective measures

• Designing HW/SW integration while working with HW/Algorithms/Cloud teams to deliver an integrated solution. 

Here’s what we are looking for: 

Must have: 

• ECU Software development experience (any of the ARM based Auto ECUs Body Electronics/Infotainment/ Powertrain/Cluster) 

• Previous experience with Low level firmware, Boot loaders, Device Drivers development 

• Hands on Experience Communication Protocols CAN, I2C, SPI, RS232

• Experience with static analyser, JTAG tools etc…

• Knowledge in Assembly and compilers

• Strong testing & debugging skills, experience with logic analysers

• Language: C, C++

Nice to have:

• Knowledge of HW design for ECUs

• Experience with UDS, AutoSAR, ISO26262, MISRA Guidelines 

• Previous experience with SIL and HIL Testing as well as Test case generation for the same.

• Hand on experience in using CAN tools & CAPL Scripts, Bus Master

• Real Time operating Systems, Python, Matlab/Simulink

You bring to Ather:

• BE/B.tech/B.Sc is minimum req with minimum 2-6 years of prior industry experience.