Firmaware Engineer -IOT

Embedded Systems / Firmware Engineer

Key Responsibilities

• Develop embedded firmware for IoT and connected devices using C/C++.
• Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
• Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
• Work with Python and Shell scripting for development and automation.
• Apply basic AI/ML and computer vision concepts to embedded applications.
• Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.

Required Skills

• C, C++, Python, Shell Scripting
• Embedded Systems & Firmware
• IoT, RTOS, Bare Metal
• Memory Management & Device Drivers
• Communication Protocols
• Camera, Motor & Vision Systems
• Basic AI/ML understanding
• Electrical & Mechanical Design understanding

Greetings from Skoegle IoT Innovations Pvt Ltd 

Job Summary

We are looking for an experienced Embedded Firmware Engineer with expertise in embedded systems, firmware architecture, RTOS, and embedded software development for IoT, wearable, automotive, industrial, and medical-grade products.

Key Responsibilities

• Design, develop, debug, and maintain firmware in C, C++, and Embedded C.

• Develop firmware for ESP32, nRF52832/52840, ATmega328P, and Raspberry Pi platforms.

• Integrate sensors using I2C, SPI, UART, ADC, GPIO, PWM, CAN, and USB.

• Develop RTOS and bare-metal firmware.

• Implement BLE, GSM/4G, GPS/GNSS, LoRa, Wi-Fi, NFC/RFID communication.

• Design bootloaders, OTA updates, and secure firmware upgrades.

• Optimize power consumption, sleep modes, memory allocation, and performance.

• Develop sensor drivers, calibration routines, and medical-grade firmware.

• Program bare ICs and support PCB bring-up, pin selection, and hardware validation.

• Support HTTP/HTTPS GET/POST/PUT APIs and embedded networking.

Required Skills

• Embedded Systems and Embedded Software Development

• C, C++, Embedded C

• RTOS, Bare-Metal Programming

• Operating Systems fundamentals

• I2C, SPI, UART, Digital & Analog Signals

• Sensor Integration

• Arduino IDE, VS Code, SEGGER Embedded Studio, J-Link

• ESP32 Series, nRF52832/52840, ATmega328P, Raspberry Pi

• BLE (UUIDs), GSM (band configuration), GPS, LoRa

• Python, HTML, HTTP/HTTPS

• Bootloader Development, OTA, Power Optimization

• Memory Allocation, Sleep Modes, Sensor Calibration

• Machine Learning on Embedded Systems (preferred)

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

Interested in designing award-winning wearables while managing challenging constraints so that your products are used everyday by millions of users? Then read on..

ULTRAHUMAN • HARDWARE

Hardware Design Engineer Wearables

Bangalore (Kudlu Gate)| • On-site | Full-time |

ABOUT THE ROLE

Ultrahuman's Hardware division builds award-winning wearables the Ultrahuman Ring and Ring Air pushing consumer technology in health and metabolic fitness. We're looking for a Hardware Design Engineer to own electronics design for our next-generation smart rings, from architecture and schematic capture through PCB layout, bring-up, and mass production.

This is a hands-on role at the extremes of miniaturization and power efficiency. You'll make architecture-level component decisions, drive high-density and RF layout, and take designs through NPI to volume — working closely with mechanical, firmware, and manufacturing teams on fast product cycles.

KEY RESPONSIBILITIES

Architecture & Schematic Design

• Translate product requirements into hardware architecture, then into schematics and manufacturable PCB designs using OrCAD / Allegro (Cadence).
• Own component selection across MCU/SoC, PMIC, sensor AFEs, and RF front-ends — balancing size, power, cost, and supply availability.
• Handle schematic-to-layout conversion and netlist import; create and maintain symbol/footprint libraries and land patterns.

High-Density & RF Layout

• Design and review high-density (HDI), rigid, and rigid-flex PCB layouts for space-constrained wearable form factors.
• Design 2.4 GHz BLE antennas and NFC coils, matching networks, and controlled-impedance routing; support antenna tuning and RF validation.
• Apply signal-integrity best practices for high-speed digital interfaces and mixed-signal boards.

Power & Low-Power Design

• Architect power trees around PMICs, buck/boost converters, and LDOs, including Li-ion charging for small-capacity cells.
• Build and validate ultra-low-power current budgets to meet multi-day battery-life targets.
• Strong grasp of power electronics and active/passive component behaviour.

Sensor Integration

• Integrate optical biosensing (PPG) AFEs, IMUs, temperature sensors, and haptics; own I²C/SPI interface design and analog front-end layout.

Manufacturing & DFM

• Own Gerber/ODB++ release, fabrication and assembly drawings, panelization, and full manufacturing data packages.
• Prepare and maintain BOMs; evaluate and qualify alternate / second-source components.
• Drive DFM/DFA reviews with fab and SMT/EMS partners; support NPI through EVT/DVT/PVT to mass production.
• Sound understanding of PCB materials, stackups, and component assembly processes.

Compliance, Reliability & Validation

• Apply EMI/EMC, thermal, and mechanical design best practices.
• Support pre-compliance and certification across FCC, CE, BIS, and RoHS, and familiarity with IEC standards for PCB design safety.
• Coordinate with test engineers on board bring-up and PCB validation; run circuit simulations for RF and signal/timing optimization.

Ownership & Collaboration

• Independently manage hardware projects end-to-end, including vendor coordination and delivery of final hardware.
• Collaborate with mechanical engineers to optimize designs and meet project timelines.
• Bring the latest design tools, methodologies, and industry best practices into the team.

REQUIRED QUALIFICATIONS

• Bachelor's or Master's in EEE, Electronics, or equivalent practical experience.
• 4+ years of hands-on hardware / PCB design experience, ideally in consumer electronics or wearables.
• Proficiency with a leading schematic and PCB toolchain (OrCAD / Allegro preferred).
• Proven track record taking a product from schematic through layout to volume production.
• Working knowledge of power electronics and active/passive component selection.
• Familiarity with global certifications (FCC, CE, BIS, RoHS) and IEC PCB safety standards.

PREFERRED / BONUS

• Experience with miniaturized high-density or rigid-flex designs.
• RF design experience (2.4 GHz / BLE, NFC, antenna tuning and matching).
• EMI/EMC design and pre-compliance testing experience.
• Low-power / battery-operated wearable product experience.
• Familiarity with reliability methods (DFMEA, derating) and RF / signal-timing circuit simulation.

We are looking for Embedded Developer with Leading Global MNC - Faridabad

Description:

• Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
• Excellent knowledge of C/C++ programming and exposure to Assembly.
• Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
• Hands-on experience in developing HAL, BSP and low-level device drivers.
• Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
• Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
• Knowledge of AUTOSAR concepts and architecture is an advantage.
• Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
• Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
• Experience in board bring-up, hardware-software integration and debugging of embedded boards.
• Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
• Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
• Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
• Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
• Experience in reverse engineering and debugging of embedded systems.
• Strong understanding of embedded system architecture and system-level design.
• Experience with Embedded Linux and/or RTOS-based systems is an advantage.
• Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
• Knowledge of NMEA/NMEA 2000 standards is a plus.
• Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
• Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

Roles & Responsibilities:

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

Role Overview

The Embedded Firmware Engineer will be responsible for development, testing, debugging, and maintenance of embedded firmware for EV Charger and IoT-based products using ESP32 platforms. The role involves working closely with hardware, cloud, mobile application, and testing teams to develop reliable and production-ready embedded solutions.

The candidate should have strong hands-on experience in Embedded C programming, ESP-IDF framework, RTOS-based firmware development, peripheral interfacing, communication protocols, and debugging of embedded systems. Knowledge of EV charging systems, charger communication protocols, and industrial embedded product development is highly preferred.

Key Responsibilities

• Develop embedded firmware in C for ESP32-based embedded systems.

• Work extensively on ESP-IDF framework for application development.

• Design modular, reusable, and scalable firmware architecture.

• Develop low-level drivers and middleware for embedded peripherals.

• Implement multitasking applications using FreeRTOS.

• Optimize firmware for performance, memory utilization, stability, and low power operation.

• Perform firmware integration with hardware modules and external systems.

• Develop and debug firmware for UART, SPI, I2C, CAN, GPIO, ADC, PWM, Ethernet, Wi-Fi, BLE, RS485, and Modbus communication.

• Interface embedded systems with energy meters, display modules, RFID modules, relays/contactors, sensors, and communication modules.

About the Internship

SkillSecure X is looking for enthusiastic Embedded Systems & IoT Design Interns who are eager to gain practical experience in embedded programming, microcontrollers, sensors, and Internet of Things (IoT) applications. This internship offers hands-on learning through guided projects and industry-focused tasks.

Responsibilities

• Develop basic embedded and IoT applications.
• Work with microcontrollers such as Arduino or ESP32.
• Interface sensors, actuators, and communication modules.
• Write and debug embedded C/C++ programs.
• Assist in IoT-based project development.
• Document project progress and technical findings.
• Complete weekly assignments and practical tasks.

Required Skills

• Basic knowledge of Embedded Systems or Electronics.
• Familiarity with C/C++ programming.
• Understanding of microcontrollers and sensors.
• Interest in IoT technologies and hardware development.
• Good analytical and problem-solving skills.

Eligibility

• Undergraduate or postgraduate students.
• Recent graduates.
• Students pursuing Electronics, Electrical, Embedded Systems, IoT, Computer Science, Mechatronics, or related fields.

Benefits

• Hands-on industry-oriented projects.
• Mentor guidance throughout the internship.
• Internship Completion Certificate.
• Letter of Recommendation (based on performance).
• Opportunity to build a professional portfolio.
• Flexible remote internship.

ROLE SUMMARY:

An experienced, hands-on engineering role owning the electrical and electronics hardware content of motor-drive and sensor systems. The Electrical / Electronics / Instrumentation Engineer is responsible for power distribution and motor-drive power-stage design, sensor interface boards, and taking boards through EMI/EMC compliance, with full ownership of schematic capture and layout from concept to fab-ready.

RESPONSIBILITIES:

• Design power distribution and the motor-drive power stage (gate drives, current sense, H-bridge/inverter stages)
• Implement supervised discrete-line circuitry per IF-08 ICD requirements
• Design sensor interface boards (resolver, encoder, analog/digital signal conditioning)
• Take boards through EMI/EMC compliance for MIL-STD-461
• Own schematic capture and layout in Altium or KiCad end-to-end, from concept to fab ready.

REQUIRED QUALIFICATIONS

• B.E./B.Tech/M.E./M.Tech. in Electrical, Electronics & Communication, Electronics & Instrumentation, or any other relevant field.
• 4-8 years of relevant experience.

KEY COMPETENCIES

• Hands-on power electronics: gate driver design, current sensing, protection circuitry
• Analog signal conditioning for sensor front-ends (resolver, encoder, LVDT-class signals)
• Practical EMI/EMC design experience, ideally against MIL-STD-461 or equivalent (automotive/industrial EMC also considered)
• Strong Altium or KiCad skills — layout discipline for power + mixed-signal boards.
• Prior work on ICD-driven or interface-controlled discrete I/O circuitry
• Defence, aerospace, or automotive electronics background

ob Description: Mechatronics Intern

Company: Zeuron.ai (Xfinito Biodesigns Private Limited)

Location: Belgaum, Karnataka

Duration: 6 Months

Open Positions: 2

Employment Type: Internship

About Zeuron.ai

Zeuron.ai is a deep-tech company working at the intersection of AI, neurotechnology, and digital therapeutics. Our MiMo360 platform combines technology and gamified therapy to support cognitive and physical rehabilitation.

Role Overview

We are looking for two enthusiastic Mechatronics Interns to support the development, integration, testing, and maintenance of hardware and software components for our innovative healthcare technology solutions.

Key Responsibilities

• Assist in the assembly, integration, and testing of electromechanical systems.
• Support sensor integration, motors, actuators, and embedded systems.
• Troubleshoot hardware and software issues and document test results.
• Collaborate with the engineering team on product development and prototyping.
• Assist in validating device functionality, performance, and reliability.

Eligibility & Skills

• Pursuing or recently completed a B.E./B.Tech in Mechatronics, Mechanical, Electronics, Electrical, or a related engineering discipline.
• Basic knowledge of electronics, sensors, microcontrollers, and mechanical systems.
• Familiarity with Arduino, embedded systems, or programming is an advantage.
• Strong problem-solving skills, willingness to learn, and a hands-on approach.

Internship Benefits

• Hands-on experience with real-world deep-tech and healthcare technology products.
• Exposure to hardware prototyping, system integration, and product testing.
• Opportunity to work closely with the engineering team at Zeuron.ai.