Embedded Software Engineer

Role: Senior PLC Developer

Location: Pune

Experience: 3-7 years

About company:

Requisimus is Germany headquartered, IT consulting and service organization. With over 25 years of expertise and global presence, we are committed to customer excellence and focused in addressing niche areas of product engineering, process consulting and software development in automotive, railways, production automation, data management and business IT domains.

Job Summary

We are seeking a skilled and proactive PLC engineer with good aptitude in programming.

Candidate should be flexible to work on PLC and eager to learn Embedded software in future.

Key Responsibilities:

• Strong PLC programming skills in Functional Block Diagram, Ladder Programming, Structured Text and SFC

• Good knowledge of UML diagrams

• Good understanding of Communication protocols over Ethernet.

Good to have:

• Good Communication Skills and Exposure to international customer.

• Experience or knowledge in Software version control tools eg. Git, SVN, etc.

• Eager to learn Embedded C, Firmware development, etc.

• Providing solutions to issues related to the connection of networks and platforms

Job Title: Embedded Firmware Engineer (RF Focus)

Location: Gurgaon, Haryana (On -site)

Employment Type: Full-Time

Experience: 3-5 years

We’re hiring an Embedded Firmware Engineer (3–5 yrs) with strong experience in Sub-GHz RF, LoRa/LoRaWAN, and IoT systems. The role focuses on firmware development, RF communication, and secure telemetry.

About Aaizel Tech

Aaizel Tech is a pioneering tech startup at the intersection of cybersecurity, AI, geospatial solutions, and more. We drive innovation by delivering transformative technology solutions across industries. As part of our dynamic team, you'll gain hands-on experience and learn from experts who are dedicated to pushing the boundaries of what's possible.

Responsibilities

• Develop firmware for STM32 (WL/H/L/F series)

• Design & implement Sub-GHz RF (403/433/868/915 MHz) systems

• Work on LoRa PHY/MAC & LoRaWAN stack (OTAA/ABP, uplink/downlink)

• Perform RF testing & debugging (RSSI, SNR, range testing, SDR/spectrum tools)

• Implement secure communication (AES-128/256, CRC/SHA)

• Develop drivers: UART, SPI, I2C, ADC, DMA

• Work with FreeRTOS (tasks, queues, ISRs, low power)

• Build communication stacks: RS485/Modbus, RS232, MQTT, TCP/IP, UDP

• Implement bootloader & OTA updates

• Debug using SWD/JTAG, logic analyzer, DSO

• Optimize for performance, power, and RF reliability

Requirements

• 3–5 years in embedded firmware + RF systems

• Strong in Embedded C, STM32CubeIDE, HAL/LL

• Hands-on with LoRa/LoRaWAN & Sub-GHz communication

• Understanding of RF fundamentals (link budget, interference, antennas)

• Experience in secure communication (AES)

• Good knowledge of FreeRTOS & industrial protocols (RS485/Modbus)

• Strong debugging skills (firmware + RF)

• Basic hardware/RF PCB understanding

Good to Have

• Experience with ChirpStack / TTN

• Knowledge of FSK/GFSK

• RF certification exposure (CE/FCC/ETSI)

How to Apply

• Please submit your resume, portfolio, and a cover letter outlining your relevant experience and how you can contribute to Aaizel Tech’s success.

7th Unit is building a wheeled upper-body humanoid robot for industrial deployment in Central Asia and Eastern Europe. This is a founding role, you own the perception architecture from day one.

What you'll do

• Build and own the full perception stack for v1 — object detection, depth estimation, workspace understanding
• Integrate perception with manipulation and motion planning systems
• Deploy and optimize perception pipelines on edge hardware (Jetson Orin or equivalent)
• Work directly on the physical robot — debugging real hardware, not simulations
• Develop the data pipeline for continuous improvement of perception performance

What we need

• 3+ years building perception systems for real robotic platforms — not research only
• Strong foundation in computer vision, 3D data processing, and sensor fusion
• Proficiency in Python and C++, hands-on experience with ROS2
• Experience deploying perception on edge compute hardware
• You have debugged a perception system on a physical robot under real operating conditions

Structure

• Position starts Q3 2026
• Equity negotiated directly, founding engineer package
• Remote during pre-build phase. In-person required from prototype assembly onward

About Statcon Electronics 

Statcon Electronics India Limited Statcon Electronics India Limited is a company specializing in the field of power electronics since its inception, with its roots going back to 1986. It has held prestigious clientage both nationally and internationally, with ABB, Alstom, BHEL, Indian Air Force, Indian Army, Indian Railways, GAIL, and Indian Oil, to name a few. SEIL has a diverse portfolio, spanning across 4 sectors – Railways, Power, Defence and Solar energy.  

About the position 

We are looking for a multiple embedded software engineers with experience in developing firmware for controlling power electronics systems. Openings are available for senior and principal engineer positions across multiple product streams, and target markets include the Indian subcontinent, Africa and North America. 

Required Technical skills 

• Demonstrated experience in developing embedded firmware for real-time power electronics systems using 16/32 bit ARM microcontrollers (ST Microelectronics preferred).  
• Must have shipped at least 1 major relevant product to the market which meets standard industry specifications. Experience with designing for North American/European markets a plus. 
• Experience with common communication protocols such as SPI, I2C, USB, UART, Bluetooth, Ethernet, RS232, and RS485 
• Experience with peripherals and systems such as ADC, DAC, timer, GPIO, PWM, DMA, NVIC, serial and parallel interfaces, memory, bootloaders and watchdog timers 
• Proficiency in advanced algorithm development using Embedded C 
• Experience with embedded software tools such as editors, assemblers, compilers, debuggers, simulators, emulators and Flash/OTP programmers. 
• Thorough understanding of power electronics topologies and control strategies 
• Good grasp over digital signal processing techniques 
• Ability to read and interpret component datasheets, PCB schematics and layout design 
• Familiarity with using measurement devices such as oscilloscopes, multimeters, function generators and logic analyzers to bring up and debug hardware 
• Demonstrated knowledge of firmware development best practices (code reviews, unit tests, Software Configuration Management, version control using git etc.) 
• Excellent documentation skills, and a good grasp over the English language 
• Comfort in using modern collaborative tools such as Slack/Microsoft Teams, JIRA/Trello/Microsoft Planner, Confluence/Microsoft OneNote and the like. 

Bonus Technical skills 

• Experience using at least one scripting language, preferably Python 
• Experience with designing for North American/European markets 
• Experience with designing for IEC and BIS standards 
• Familiarity with EMI/EMC process 
• Ability to simulate power electronics systems using Simulink/MATLAB or equivalent open-source tools 
• Familiarity with agile software development processes 
• Experience with Linux administration using command line 

Soft skills 

• Ability to mentor junior engineers and generate testing procedures for people of all skill levels 
• Excellent inter-personal skills 
• Strong attention to detail with the ability to work on tight deadlines 
• Team player with the ability to work independently under minimal supervision 
• Excellent problem-solving skills 
• Ability and desire to learn new technologies quickly 

Qualifications 

• Junior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 1 year of industrial experience, or a Bachelor's with 3 years of relevant industrial experience. 
• Senior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 4 years of industrial experience, or a Bachelor's with 6 years of relevant industrial experience. 
• Principal Engineer: A Master's (preferred) in Electrical /Electronics/Computer Engineering with 8 years of industrial experience, or a Bachelor's with 10 years of relevant industrial experience. 

Responsibilities 

• Develop, implement and test cutting-edge algorithms for medium and high-power AC-DC, DC-AC and AC-AC conversion of 1 phase and 3 phase AC systems up to 440 V AC, and DC-DC conversion of systems up to 1000 V DC. 
• Develop sensing and IoT solutions for power electronics embedded systems 
• Convert product requirements into technical specifications for Indian and international markets 
• Cover all stages (pertaining to firmware) of V model for product development 
• Generate technical documentation describing product functioning and test procedures for hand-off to SQA 
• Debug product failures in the field using data-driven analysis techniques 
• Mentor junior engineers 
• Host research talks on emerging technologies within the company 

Statcon Electronics is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, age, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Statcon Electronics is committed to creating a dynamic work environment that values diversity and inclusion, respect and integrity, customer focus, and innovation. For more information, visit www.sindia.co.in. 

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

We have a very urgent requirement with our client, please go through the job details and if interested do send us your updated resume and feel free to reach me.

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Fulltime

Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

You’ll be our: Firmware Engineer

You’ll be based at: IBC Knowledge Park, Bengaluru

You’ll be Aligned with: Embedded Manager

You’ll be a member of: Vehicle Software

What you’ll do at Ather:

A successful candidate is expected to lead the Firmware development and integration effort for various Ather products and be responsible for qualifying and integrating FW at various stages with HW. Responsibilities include:

• Understanding requirements from different stakeholders and translating these to application features

• Writing high quality source code to program complete applications within deadlines

• Unit-testing code for robustness, including edge cases, usability, and general reliability

• Performing functional and non-functional testing

• Troubleshooting and debugging applications

• Designing creative prototypes according to specifications

• Evaluating existing applications to reprogram, update and add new features

• Developing technical documents and handbooks to accurately represent application design and code

• Identifying and communicating possible risks along with preventive and corrective measures

• Designing HW/SW integration while working with HW/Algorithms/Cloud teams to deliver an integrated solution. 

Here’s what we are looking for: 

Must have: 

• ECU Software development experience (any of the ARM based Auto ECUs Body Electronics/Infotainment/ Powertrain/Cluster) 

• Previous experience with Low level firmware, Boot loaders, Device Drivers development 

• Hands on Experience Communication Protocols CAN, I2C, SPI, RS232

• Experience with static analyser, JTAG tools etc…

• Knowledge in Assembly and compilers

• Strong testing & debugging skills, experience with logic analysers

• Language: C, C++

Nice to have:

• Knowledge of HW design for ECUs

• Experience with UDS, AutoSAR, ISO26262, MISRA Guidelines 

• Previous experience with SIL and HIL Testing as well as Test case generation for the same.

• Hand on experience in using CAN tools & CAPL Scripts, Bus Master

• Real Time operating Systems, Python, Matlab/Simulink

You bring to Ather:

• BE/B.tech/B.Sc is minimum req with minimum 2-6 years of prior industry experience.

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SOFTWARE ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with Hardware, Systems and other multi-functional teams and deliver high quality software at fundamental layer of operating system including frameworks, daemons, drivers.
• You need to keep security and performance in mind, enable key features to improve privacy and prevent fraudulence
• The position requires high level thinking to design code solutions along with low level programming and excellent communications and leadership skills, with the ability to work in a fast paced environment.

RESPONSIBILITIES:

• Rich experience of programming on cryptography
• Profound understanding on Operating System concept
• Highly self-motivated and capable of work and finish tasks alone
• Comfortable and adaptable in a fast-paced environment
• Fluent in both oral and written English
• Strong communication and interpersonal skills; excellent judgment

EXPERIENCE:

• We as a team are looking for freshers or young professionals with 0-4 years of experience having a a self-directed, proactive approach to tackling problems and working through impediment and an ability to generate trust and build alliances with co-workers.

• Technical Experience on Physical Layer of 3GPP LTE
• Experience on DSP Development\
• Proficient in C Good
• understanding of Wireless Communications
• Experience on MAC-PHY interface
• Behavioral Interpersonal skills & Ability to work in team
• Good Communication Skills Good Analytical Skills