Cutshort logo
For Employers
Leading Global MNC logo
Embedded Developer
Leading Global MNC

Embedded Developer at Leading Global MNC · Faridabad · 7 - 12 years · Posted 5 Oct 2026

Bean HR Consulting's logo

Embedded Developer

at Leading Global MNC

Agency job
7 - 12 yrs
Best in industry
Faridabad
Skills
skill iconC++
FreeRTOS
Microcontrollers
Oscilloscope
Logic analyzer
Function generator

We are looking for Embedded Developer with Leading Global MNC - Faridabad


Description:

  • Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
  • Excellent knowledge of C/C++ programming and exposure to Assembly.
  • Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
  • Hands-on experience in developing HAL, BSP and low-level device drivers.
  • Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
  • Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
  • Knowledge of AUTOSAR concepts and architecture is an advantage.
  • Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
  • Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
  • Experience in board bring-up, hardware-software integration and debugging of embedded boards.
  • Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
  • Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
  • Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
  • Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
  • Experience in reverse engineering and debugging of embedded systems.
  • Strong understanding of embedded system architecture and system-level design.
  • Experience with Embedded Linux and/or RTOS-based systems is an advantage.
  • Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
  • Knowledge of NMEA/NMEA 2000 standards is a plus.
  • Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
  • Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

 

Roles & Responsibilities:

 

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

Read more
Users love Cutshort
Read about what our users have to say about finding their next opportunity on Cutshort.
Shubham Vishwakarma's profile image

Shubham Vishwakarma

Full Stack Developer - Averlon
I had an amazing experience. It was a delight getting interviewed via Cutshort. The entire end to end process was amazing. I would like to mention Reshika, she was just amazing wrt guiding me through the process. Thank you team.
Companies hiring on Cutshort
companies logos

Similar jobs (10)

LetsIntern
Actively reviewing applications
at LetsIntern
1 candid answer
Ashish Singh
Posted by Ashish Singh
Remote only
0 - 1 yrs
₹12000 - ₹18000 / mo
Power Electronics
Electronics
Embedded C

Power Electric Vehicles with embedded software for battery management and autonomous driving.


What you'll do:

  • Develop BMS algorithms (SOC/SOH estimation)
  • Implement CAN bus communication protocols
  • Code motor control algorithms (FOC, sensorless)
  • Build ADAS features (ultrasonic parking, vision)
  • HIL testing with Vector tools
  • Optimize for automotive-grade reliability (AUTOSAR)

What we need:

  • C/C++, Embedded Linux/RTOS
  • Microcontroller experience (STM32, NXP)
  • Control systems or automotive interest
  • Debugging skills (oscilloscopes, logic analyzers)

Future-proof skills:

  • Work on actual EV prototypes
  • Portfolio for Tata, Mahindra EV teams
  • Automotive cybersecurity exposure
Read more
Zenius IT Services Pvt Ltd
Actively reviewing applications
at Zenius IT Services Pvt Ltd
2 candid answers
Sunita Pradhan
Posted by Sunita Pradhan
Hyderabad
2 - 4 yrs
₹4L - ₹7L / yr
skill iconC
skill iconC++
skill iconPython
Shell Scripting
Internet of Things (IOT)
+1 more

Embedded Systems / Firmware Engineer


Key Responsibilities

  • Develop embedded firmware for IoT and connected devices using C/C++.
  • Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
  • Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
  • Work with Python and Shell scripting for development and automation.
  • Apply basic AI/ML and computer vision concepts to embedded applications.
  • Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.


Required Skills

  • C, C++, Python, Shell Scripting
  • Embedded Systems & Firmware
  • IoT, RTOS, Bare Metal
  • Memory Management & Device Drivers
  • Communication Protocols
  • Camera, Motor & Vision Systems
  • Basic AI/ML understanding
  • Electrical & Mechanical Design understanding


Read more
icon

Applications on this job are not being reviewed actively. You may apply but please follow up with the company via other channels too.

Bengaluru (Bangalore)
8 - 10 yrs
₹12L - ₹15L / yr
RTOS
Embedded C
ESP32

Greetings from Skoegle IoT Innovations Pvt Ltd 


Job Summary

We are looking for an experienced Embedded Firmware Engineer with expertise in embedded systems, firmware architecture, RTOS, and embedded software development for IoT, wearable, automotive, industrial, and medical-grade products.



Key Responsibilities

• Design, develop, debug, and maintain firmware in C, C++, and Embedded C.

• Develop firmware for ESP32, nRF52832/52840, ATmega328P, and Raspberry Pi platforms.

• Integrate sensors using I2C, SPI, UART, ADC, GPIO, PWM, CAN, and USB.

• Develop RTOS and bare-metal firmware.

• Implement BLE, GSM/4G, GPS/GNSS, LoRa, Wi-Fi, NFC/RFID communication.

• Design bootloaders, OTA updates, and secure firmware upgrades.

• Optimize power consumption, sleep modes, memory allocation, and performance.

• Develop sensor drivers, calibration routines, and medical-grade firmware.

• Program bare ICs and support PCB bring-up, pin selection, and hardware validation.

• Support HTTP/HTTPS GET/POST/PUT APIs and embedded networking.

Required Skills

• Embedded Systems and Embedded Software Development

• C, C++, Embedded C

• RTOS, Bare-Metal Programming

• Operating Systems fundamentals

• I2C, SPI, UART, Digital & Analog Signals

• Sensor Integration

• Arduino IDE, VS Code, SEGGER Embedded Studio, J-Link

• ESP32 Series, nRF52832/52840, ATmega328P, Raspberry Pi

• BLE (UUIDs), GSM (band configuration), GPS, LoRa

• Python, HTML, HTTP/HTTPS

• Bootloader Development, OTA, Power Optimization

• Memory Allocation, Sleep Modes, Sensor Calibration

• Machine Learning on Embedded Systems (preferred)

Read more
Hashone Careers Private Limited
Actively reviewing applications
Madhavan I
Posted by Madhavan I
Coimbatore
6 - 10 yrs
₹15L - ₹30L / yr
Embedded software
Cyber Security

Job Summary

We are looking for an Automotive Cybersecurity Engineer with expertise in designing and

implementing cybersecurity mechanisms for AUTOSAR, QNX, Android, and Linux-based

automotive platforms. The role focuses on embedded security, secure coding, cryptographic

solutions, and protecting next-generation automotive systems.

Key Responsibilities

• Design and develop security mechanisms for AUTOSAR, QNX, Android, and Linux

environments.

• Implement secure boot, secure flashing, secure diagnostics, access control, secure

compiler usage, and firewall mechanisms.

• Develop HSM/TEE-based security solutions and secure key storage.

• Implement hardware-based cryptographic operations.

• Develop secure embedded software using C/C++.

• Perform vulnerability analysis and security validation.

• Collaborate with cross-functional engineering teams.

• Use Python and GenAI tools (including G-HUB) to improve automation and engineering

productivity.

• Conduct code reviews and enforce secure coding practices.

• Prepare technical documentation and support security audits.

Required Skills

• 6–9 years of embedded software or automotive cybersecurity experience.

• Strong experience with AUTOSAR, QNX, Android, or Linux.

• Knowledge of secure boot, secure flashing, secure diagnostics, access control, secure

compiler usage, and firewalls.

• Experience with HSM, TEE, secure key storage, and hardware cryptography.

• Strong C/C++ programming skills.

• Knowledge of MISRA and CERT secure coding standards.

• Working knowledge of Python and GenAI tools such as G-HUB.

• Strong analytical and problem-solving skills.

Preferred Skills

• Knowledge of ISO 21434 and automotive cybersecurity standards.


• Experience with threat modeling and penetration testing.

• Knowledge of PKI and cryptographic libraries.

• Experience with Agile and CI/CD.

Education

Bachelor’s or Master’s degree in Electronics, Computer Science, Cybersecurity, Embedded

Systems, Information Technology, or a related field.

Read more
Visteon
Actively reviewing applications
Agency job
via Kirubin Technologies by Bala Murugan
Bengaluru (Bangalore)
9 - 16 yrs
Best in industry
ACL
Wireshark
TCP/IP
UDP
DHCP
+3 more

Mandatory Skills

Strong experience in C/C++ and/or Java.

Hands-on development with Android AOSP and Linux-based IVI platforms.

Strong understanding of Linux and Android networking stacks.

Automotive Ethernet and embedded networking development.

Ethernet switch configuration, EMAC, gateway, TCAM, ACL and interface integration.

Networking protocols: TCP/IP, UDP, SOME/IP, IPv4/IPv6, ARP, DHCP, ICMP, IGMP and mDNS.

L2/L3 networking, VLAN, bridging, routing and multicast.

Wireshark, packet capture, pcap and Linux iptables.


Key Responsibilities

Develop and optimize Ethernet and networking components for automotive IVI systems.

Implement networking functionality across Linux and Android platforms.

Configure Ethernet switches, interfaces and L2/L3 features.

Debug connectivity and protocol-level issues using network analysis tools.

Collaborate with hardware, BSP and system integration teams.

Support automotive Ethernet validation and Open Alliance TC8 certification.


Good-to-Have Skills

Automotive Ethernet interfaces: MII, RGMII, SGMII, 100/1000BASE-T1, PCIe and SERDES.

AVB/TSN standards: IEEE 802.1AS, 1722, 802.1Qav and 802.1Qat.

Media Clock Recovery (MCR) and Open AVNU stack.

Automotive IVI and connected-vehicle platforms.

Low-latency networking and performance optimization.


Apply link: https://careers.kirubintechnologies.biz/


Read more
LetsIntern
at LetsIntern
1 candid answer
Ashish Singh
Posted by Ashish Singh
icon

Applications on this job are not being reviewed actively. You may apply but please follow up with the company via other channels too.

Remote only
0 - 1 yrs
₹1L - ₹2L / yr
Human Resources (HR)

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.


Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.


Key Responsibilities

  • Assist with embedded system projects.
  • Work with microcontrollers and sensors.
  • Develop and test basic firmware.
  • Assist with hardware-software integration.
  • Debug basic system issues.
  • Participate in practical projects.

Requirements

  • Basic C/C++ knowledge.
  • Understanding of electronics fundamentals.
  • Interest in embedded systems.
  • Knowledge of microcontrollers is a plus.
  • Problem-solving skills.

Perks

  • Certificate of Internship
  • Flexible work hours
  • Mentorship and real project exposure
  • Potential for PPO
  • Letter of Recommendation
  • Performance-Based Stipend available up to ₹18,000/month


Read more
Cybotrix Technologies Pvt Ltd
Actively reviewing applications
Auni Kumar
Posted by Auni Kumar
Delhi, Gurugram, Noida, Ghaziabad, Faridabad
3 - 6 yrs
₹7L - ₹15L / yr
Embedded C
Firmware development
EV Charger

Role Overview

The Embedded Firmware Engineer will be responsible for development, testing, debugging, and maintenance of embedded firmware for EV Charger and IoT-based products using ESP32 platforms. The role involves working closely with hardware, cloud, mobile application, and testing teams to develop reliable and production-ready embedded solutions.


The candidate should have strong hands-on experience in Embedded C programming, ESP-IDF framework, RTOS-based firmware development, peripheral interfacing, communication protocols, and debugging of embedded systems. Knowledge of EV charging systems, charger communication protocols, and industrial embedded product development is highly preferred.

Key Responsibilities

• Develop embedded firmware in C for ESP32-based embedded systems.

• Work extensively on ESP-IDF framework for application development.

• Design modular, reusable, and scalable firmware architecture.

• Develop low-level drivers and middleware for embedded peripherals.

• Implement multitasking applications using FreeRTOS.

• Optimize firmware for performance, memory utilization, stability, and low power operation.

• Perform firmware integration with hardware modules and external systems.


• Develop and debug firmware for UART, SPI, I2C, CAN, GPIO, ADC, PWM, Ethernet, Wi-Fi, BLE, RS485, and Modbus communication.


• Interface embedded systems with energy meters, display modules, RFID modules, relays/contactors, sensors, and communication modules.

Read more
LetsIntern
Actively reviewing applications
at LetsIntern
1 candid answer
Ashish Singh
Posted by Ashish Singh
Remote only
0 - 1 yrs
₹15000 - ₹18000 / mo
Embedded C

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.


Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.


Key Responsibilities

  • Assist with embedded system projects.
  • Work with microcontrollers and sensors.
  • Develop and test basic firmware.
  • Assist with hardware-software integration.
  • Debug basic system issues.
  • Participate in practical projects.

Requirements

  • Basic C/C++ knowledge.
  • Understanding of electronics fundamentals.
  • Interest in embedded systems.
  • Knowledge of microcontrollers is a plus.
  • Problem-solving skills.

Perks

  • Certificate of Internship
  • Flexible work hours
  • Mentorship and real project exposure
  • Potential for PPO
  • Letter of Recommendation
  • Performance-Based Stipend available up to ₹18,000/month
Read more
SkillsecureX
Actively reviewing applications
Saurav Singh
Posted by Saurav Singh
Remote only
0 - 1 yrs
₹12000 - ₹18000 / mo
Embedded C
skill iconC
Artificial Intelligence (AI)

About the Internship


SkillSecure X is looking for enthusiastic Embedded Systems & IoT Design Interns who are eager to gain practical experience in embedded programming, microcontrollers, sensors, and Internet of Things (IoT) applications. This internship offers hands-on learning through guided projects and industry-focused tasks.


Responsibilities

  • Develop basic embedded and IoT applications.
  • Work with microcontrollers such as Arduino or ESP32.
  • Interface sensors, actuators, and communication modules.
  • Write and debug embedded C/C++ programs.
  • Assist in IoT-based project development.
  • Document project progress and technical findings.
  • Complete weekly assignments and practical tasks.


Required Skills

  • Basic knowledge of Embedded Systems or Electronics.
  • Familiarity with C/C++ programming.
  • Understanding of microcontrollers and sensors.
  • Interest in IoT technologies and hardware development.
  • Good analytical and problem-solving skills.


Eligibility

  • Undergraduate or postgraduate students.
  • Recent graduates.
  • Students pursuing Electronics, Electrical, Embedded Systems, IoT, Computer Science, Mechatronics, or related fields.

Benefits

  • Hands-on industry-oriented projects.
  • Mentor guidance throughout the internship.
  • Internship Completion Certificate.
  • Letter of Recommendation (based on performance).
  • Opportunity to build a professional portfolio.
  • Flexible remote internship.


Read more
Leading MedTech Company
Actively reviewing applications
Leading MedTech Company
Agency job
via Bean HR Consulting by snigdha Khurana
Bengaluru (Bangalore)
15 - 20 yrs
Best in industry
AOSP
skill iconAndroid Development
smart devices

🚀 We’re Hiring | Senior R&D Manager – Smart Devices

📍 Location: Bengaluru, India

💼 Experience: 15+ years

🔹 Work Mode: On-site


🟥Key Responsibilities:

🔹Lead and mentor engineering teams working on embedded OS and user experience.

🔹Drive architecture, development, validation, release, and product sustenance.

🔹Provide technical leadership across Android OS, Embedded Linux, BSP, system services, and device integration.

🔹Guide platform-level development involving AOSP, Android Framework, middleware, HAL, and embedded systems.

🔹Collaborate with cross-functional teams to deliver reliable, high-quality smart-device solutions.


✅ What We’re Looking For

🔹15+ years of experience in software/embedded engineering.

🔹Strong expertise in Android Platform / AOSP, Android Framework, HAL, BSP, and device integration.

🔹Experience with Android-based hardware products such as smart devices, tablets, wearables, kiosks, automotive infotainment, or other embedded products.

🔹Proven engineering leadership, people management, coaching, and team development experience.

🔹Embedded Linux / Yocto experience is an added advantage.

🔹6+ years of direct people management experience preferred.


📩 Interested or know someone suitable? Share your updated CV : snigdhaattheratebeanhr.com

Read more
Why apply to jobs via Cutshort
people_solving_puzzle
Personalized job matches
Stop wasting time. Get matched with jobs that meet your skills, aspirations and preferences.
people_verifying_people
Verified hiring teams
See actual hiring teams, find common social connections or connect with them directly.
ai_chip
Move faster with AI
We use AI to get you faster responses, recommendations and unmatched user experience.
Did not find a job you were looking for?
icon
Search for relevant jobs from 10000+ companies such as Google, Amazon & Uber actively hiring on Cutshort.
companies logo
companies logo
companies logo
companies logo
companies logo
Get to hear about interesting companies hiring right now
Company logo
Company logo
Company logo
Company logo
Company logo
Linkedin iconFollow Cutshort
Users love Cutshort
Read about what our users have to say about finding their next opportunity on Cutshort.
Shubham Vishwakarma's profile image

Shubham Vishwakarma

Full Stack Developer - Averlon
I had an amazing experience. It was a delight getting interviewed via Cutshort. The entire end to end process was amazing. I would like to mention Reshika, she was just amazing wrt guiding me through the process. Thank you team.
Companies hiring on Cutshort
companies logos