Embedded Firmware Engineer

Embedded Systems / Firmware Engineer

Key Responsibilities

• Develop embedded firmware for IoT and connected devices using C/C++.
• Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
• Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
• Work with Python and Shell scripting for development and automation.
• Apply basic AI/ML and computer vision concepts to embedded applications.
• Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.

Required Skills

• C, C++, Python, Shell Scripting
• Embedded Systems & Firmware
• IoT, RTOS, Bare Metal
• Memory Management & Device Drivers
• Communication Protocols
• Camera, Motor & Vision Systems
• Basic AI/ML understanding
• Electrical & Mechanical Design understanding

We are looking for Embedded Developer with Leading Global MNC - Faridabad

Description:

• Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
• Excellent knowledge of C/C++ programming and exposure to Assembly.
• Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
• Hands-on experience in developing HAL, BSP and low-level device drivers.
• Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
• Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
• Knowledge of AUTOSAR concepts and architecture is an advantage.
• Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
• Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
• Experience in board bring-up, hardware-software integration and debugging of embedded boards.
• Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
• Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
• Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
• Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
• Experience in reverse engineering and debugging of embedded systems.
• Strong understanding of embedded system architecture and system-level design.
• Experience with Embedded Linux and/or RTOS-based systems is an advantage.
• Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
• Knowledge of NMEA/NMEA 2000 standards is a plus.
• Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
• Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

Roles & Responsibilities:

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

Job Summary:

We are seeking a skilled Firmware Developer with 3 years of experience to join our team. The successful candidate will be responsible for developing and maintaining embedded software for our products. The candidate should have a strong understanding of the software development life cycle, embedded systems, and the C programming language.

Key Responsibilities:

• Develop and maintain embedded software for our products

• Design and implement software modules and drivers for embedded systems

• Collaborate with hardware engineers to integrate software and hardware components

• Test and debug embedded software

• Create and maintain technical documentation

• Participate in code reviews and contribute to software architecture and design discussions

• Stay up-to-date with the latest trends and technologies in embedded systems and software development

Requirements:

• Bachelor’s degree in Computer Science, Electrical Engineering, or a related field

• 3 years of experience in embedded software development

• Strong understanding of software development life cycle

• Proficiency in C programming language

• Experience with embedded systems and microcontrollers

• Experience with communication protocols such as SPI, I2C, UART, and CAN

• Familiarity with software development tools such as Git, Jira, and Jenkins

• Strong analytical and problem-solving skills

• Ability to work independently and in a team environment

• Excellent communication and interpersonal skills

Preferred qualifications:

• Degree in Electrical Engineering, or a related field

• Experience with wireless communication protocols such as Bluetooth, LoRa & Wi-Fi

• Knowledge of real-time operating systems such as FreeRTOS, uC/OS-II, or VxWorks

• Experience with Agile software development methodologies

Benefits:

• Health insurance
• Leave encashment
• Paid sick time
• Provident Fund
• 
  

Job Type: Full Time

Job Location: Perundurai

State Wise: Tamil Nadu

Divison Wise: R & D Division

Power Electric Vehicles with embedded software for battery management and autonomous driving.

What you'll do:

• Develop BMS algorithms (SOC/SOH estimation)
• Implement CAN bus communication protocols
• Code motor control algorithms (FOC, sensorless)
• Build ADAS features (ultrasonic parking, vision)
• HIL testing with Vector tools
• Optimize for automotive-grade reliability (AUTOSAR)

What we need:

• C/C++, Embedded Linux/RTOS
• Microcontroller experience (STM32, NXP)
• Control systems or automotive interest
• Debugging skills (oscilloscopes, logic analyzers)

Future-proof skills:

• Work on actual EV prototypes
• Portfolio for Tata, Mahindra EV teams
• Automotive cybersecurity exposure

• Design and implement scalable IoT solutions from sensor to cloud, ensuring seamless integration between

vehicle hardware (fuel sensors, GPS trackers, OBD devices) and the Anytime Diesel platform

• Integrate industrial and automotive sensors, microcontrollers, and gateways with the platform

• Develop, optimize, and troubleshoot data flow using protocols such as CAN bus, Modbus, RS485, TCP, and

RTU

• Manage the full IoT device lifecycle across the fleet — provisioning, remote configuration, health monitoring,

and OTA/FOTA firmware updates

• Collaborate with software, data, and operations teams to define data models and ensure clean data ingestion for

fleet analytics

• Conduct testing, debugging, and performance analysis of embedded firmware and IoT systems using tools like

oscilloscopes and logic analyzers

• Create technical documentation — architecture diagrams, API specs, and deployment guides

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

About Us

Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.

Role Overview

As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.

Key Responsibilities

• Assist with embedded system projects.
• Work with microcontrollers and sensors.
• Develop and test basic firmware.
• Assist with hardware-software integration.
• Debug basic system issues.
• Participate in practical projects.

Requirements

• Basic C/C++ knowledge.
• Understanding of electronics fundamentals.
• Interest in embedded systems.
• Knowledge of microcontrollers is a plus.
• Problem-solving skills.

Perks

• Certificate of Internship
• Flexible work hours
• Mentorship and real project exposure
• Potential for PPO
• Letter of Recommendation
• Performance-Based Stipend available up to ₹18,000/month

IoT Engineer – Telematics & C#/.NET

Experience :05+ Years

Location : Ahmedabad

ABOUT MYFMS

MyFMS is Micpoint B.V.'s SaaS platform for fleet, facility, and access management, built on .NET and C#, and hosted on our own private cloud in the Netherlands, spread across two data centers. A key part of MyFMS is its connector layer: the software that links telematics and IoT hardware in the field (such as GPS trackers and CAN-bus interfaces) to the platform. To further build out and standardize this layer, we're looking for an IoT Engineer with C#/.NET development experience.

WHAT YOU'LL DO

•    Implement and maintain telematics integrations in C#/.NET on MyFMS's connectors, which link telematics hardware (e.g. GPS trackers and CAN-bus interfaces) to the platform.

•    Investigate which configurations, protocol settings, and command sets of supported hardware (e.g. CAN/LVCAN parameters) can serve as a standard, and document them.

•    Research and manage firmware versions for telematics devices, and advise on firmware updates and compatibility.

•    Translate device-specific protocols into a uniform, reusable data structure within the platform.

•    Document device configurations and firmware standards in Markdown for the development team and support organization.

•    Work according to our DevOps way of working, integrating your work into the CI/CD pipelines we use for testing and releases.

•    Collaborate with the (international) development team on the architecture of the connector layer and contribute to the technical roadmap.

•    Support troubleshooting of field issues, such as connectivity or synchronization problems with hardware.

•    Build simulators for telematics hardware, so protocols, configurations, and firmware behavior can be tested without needing physical devices.

•    Use AI, and work with and train models, to build simulations and test setups.

•    Ensure the connector integrations are fully testable (including unit and integration tests), safeguarding the quality of the telematics integrations.

WHAT THE ROLE REQUIRES

•    Bachelor's/Master's level thinking and working ability in a technical field, e.g. Electrical Engineering, Embedded Systems, Computer Science, or similar.

•    Demonstrable experience with software development in C#/.NET.

•    Affinity with or experience in IoT/telematics hardware, such as GPS trackers, CAN-bus interfaces, and sensors.

•    Experience with Ruptela, Teltonika, and Digital Matter hardware is a plus.

•    Knowledge of communication protocols such as CAN, LVCAN, OBD-II, MQTT, and/or TCP/IP is a plus.

•    Experience reading, configuring, or updating firmware on embedded devices is a plus.

•    Experience building test or simulation tools (e.g. device or protocol simulators) and with test automation (unit/integration tests) is a plus.

•    Experience with DevOps practices and CI/CD pipelines (incl. Azure DevOps) is a plus.

•    Affinity with AI/machine learning, for example training models for simulations and test setups, is a plus.

•    You're analytical and structured: you enjoy bringing order to a wide range of device configurations and documenting what you find.

•    You value quality assurance and structurally build testability into your own work.

•    You're proficient in English, spoken and written (the team's working language); Dutch is not required.

ROLE SUMMARY:

An experienced, hands-on engineering role owning the electrical and electronics hardware content of motor-drive and sensor systems. The Electrical / Electronics / Instrumentation Engineer is responsible for power distribution and motor-drive power-stage design, sensor interface boards, and taking boards through EMI/EMC compliance, with full ownership of schematic capture and layout from concept to fab-ready.

RESPONSIBILITIES:

• Design power distribution and the motor-drive power stage (gate drives, current sense, H-bridge/inverter stages)
• Implement supervised discrete-line circuitry per IF-08 ICD requirements
• Design sensor interface boards (resolver, encoder, analog/digital signal conditioning)
• Take boards through EMI/EMC compliance for MIL-STD-461
• Own schematic capture and layout in Altium or KiCad end-to-end, from concept to fab ready.

REQUIRED QUALIFICATIONS

• B.E./B.Tech/M.E./M.Tech. in Electrical, Electronics & Communication, Electronics & Instrumentation, or any other relevant field.
• 4-8 years of relevant experience.

KEY COMPETENCIES

• Hands-on power electronics: gate driver design, current sensing, protection circuitry
• Analog signal conditioning for sensor front-ends (resolver, encoder, LVDT-class signals)
• Practical EMI/EMC design experience, ideally against MIL-STD-461 or equivalent (automotive/industrial EMC also considered)
• Strong Altium or KiCad skills — layout discipline for power + mixed-signal boards.
• Prior work on ICD-driven or interface-controlled discrete I/O circuitry
• Defence, aerospace, or automotive electronics background

🚀 We’re Hiring | Senior R&D Manager – Smart Devices

📍 Location: Bengaluru, India

💼 Experience: 15+ years

🔹 Work Mode: On-site

🟥Key Responsibilities:

🔹Lead and mentor engineering teams working on embedded OS and user experience.

🔹Drive architecture, development, validation, release, and product sustenance.

🔹Provide technical leadership across Android OS, Embedded Linux, BSP, system services, and device integration.

🔹Guide platform-level development involving AOSP, Android Framework, middleware, HAL, and embedded systems.

🔹Collaborate with cross-functional teams to deliver reliable, high-quality smart-device solutions.

✅ What We’re Looking For

🔹15+ years of experience in software/embedded engineering.

🔹Strong expertise in Android Platform / AOSP, Android Framework, HAL, BSP, and device integration.

🔹Experience with Android-based hardware products such as smart devices, tablets, wearables, kiosks, automotive infotainment, or other embedded products.

🔹Proven engineering leadership, people management, coaching, and team development experience.

🔹Embedded Linux / Yocto experience is an added advantage.

🔹6+ years of direct people management experience preferred.

📩 Interested or know someone suitable? Share your updated CV : snigdhaattheratebeanhr.com