Embedded Developer at Leading Global MNC · Faridabad · 7 - 12 years · Posted 29 Sep 2026
C++We are looking for Embedded Developer with Leading Global MNC - Faridabad
Description:
- Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
- Excellent knowledge of C/C++ programming and exposure to Assembly.
- Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
- Hands-on experience in developing HAL, BSP and low-level device drivers.
- Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
- Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
- Knowledge of AUTOSAR concepts and architecture is an advantage.
- Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
- Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
- Experience in board bring-up, hardware-software integration and debugging of embedded boards.
- Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
- Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
- Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
- Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
- Experience in reverse engineering and debugging of embedded systems.
- Strong understanding of embedded system architecture and system-level design.
- Experience with Embedded Linux and/or RTOS-based systems is an advantage.
- Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
- Knowledge of NMEA/NMEA 2000 standards is a plus.
- Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
- Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.
Roles & Responsibilities:
The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.
The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.
The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs (10)
We are hiring an Embedded Software Engineer to develop firmware and low-level software for embedded devices and connected products.
Responsibilities
- Develop firmware in Embedded C and C++ for microcontroller-based systems
- Build real-time applications on RTOS platforms such as FreeRTOS
- Write and maintain device drivers for peripherals (UART, SPI, I2C, CAN)
- Develop and customise Embedded Linux components
- Debug hardware and software issues using oscilloscopes, JTAG and debuggers
- Work with hardware teams on board bring-up and testing
Requirements
- 1+ years of experience in embedded software development
- Strong Embedded C and C++ programming skills
- Hands-on experience with microcontrollers (ARM Cortex, STM32, ESP32 or similar)
- Experience with RTOS and device driver development
- Exposure to Embedded Linux is a plus
Power Electric Vehicles with embedded software for battery management and autonomous driving.
What you'll do:
- Develop BMS algorithms (SOC/SOH estimation)
- Implement CAN bus communication protocols
- Code motor control algorithms (FOC, sensorless)
- Build ADAS features (ultrasonic parking, vision)
- HIL testing with Vector tools
- Optimize for automotive-grade reliability (AUTOSAR)
What we need:
- C/C++, Embedded Linux/RTOS
- Microcontroller experience (STM32, NXP)
- Control systems or automotive interest
- Debugging skills (oscilloscopes, logic analyzers)
Future-proof skills:
- Work on actual EV prototypes
- Portfolio for Tata, Mahindra EV teams
- Automotive cybersecurity exposure
C++
Python
JavascriptTechnical Lead – Embedded Software Application Projects
link: https://www.ziliconcloud.com/careers
ZILICONCLOUD PRIVATE LIMITED is looking for an experienced Technical Lead with 5–8 years of industry experience in Embedded Systems, IoT, AI, Cloud, and Software Engineering.
The candidate will lead Embedded, IoT, Edge AI, and Cloud projects, define system architecture, convert requirements into technical tasks, and ensure successful project execution and delivery.
Key Responsibilities
- Design modular system architectures for Embedded, IoT, Edge AI, Cloud, REST APIs, and dashboards.
- Convert requirements into clear tasks, milestones, and deliverables.
- Track project progress, manage technical risks, and ensure on-time delivery.
- Guide engineers on coding standards, Git, testing, debugging, and documentation.
- Troubleshoot issues across hardware, firmware, IoT, cloud, backend, and UI.
- Support system integration, testing, debugging, and performance improvement.
- Review technical designs, code, and test results.
- Lead prototype development, integration, technical reviews, and demonstrations.
- Mentor young engineers and explain complex technical concepts in a simple and practical way.
Required Skills
C/C++, Python, JavaScript/TypeScript, Linux, FreeRTOS, Microcontrollers, REST APIs, MQTT, Git, Embedded Software, IoT, and system debugging.
Preferred: AWS IoT, Microsoft Azure, ThingsBoard, OpenCV, TensorFlow Lite (TFLite), React, Flutter, or FastAPI.
Education
B.E./B.Tech/M.E./M.Tech in ECE, CSE, Embedded Systems, Mechatronics, or a related field.
📍 Location: East Tambaram, Chennai, Tamil Nadu
💼 Experience: 5–8 Years
🕒 Employment Type: Full-Time
- Provide technical job support for Automotive Embedded/ECU testing activities.
- Validate the MCU 5V reference voltage (VREF) under normal and fault conditions.
- Design and execute test cases for voltage monitoring and fault detection.
- Perform over-voltage and under-voltage fault injection.
- Monitor and validate Power-Good (PG) status during different voltage conditions.
- Capture and analyze ADC readings and compare them against expected values.
- Verify accurate detection of voltage-related faults.
- Validate ECU diagnostic behavior, fault codes, and reporting.
- Perform positive, negative, boundary, and fault-condition testing.
- Analyze test failures and perform root-cause analysis.
- Support debugging of ECU hardware/software issues.
- Review requirements, test specifications, and validation documents.
- Execute regression testing after software/firmware changes.
- Provide technical guidance and troubleshooting support as part of the job-support engagement.
Job Summary:
We are seeking a skilled Firmware Developer with 3 years of experience to join our team. The successful candidate will be responsible for developing and maintaining embedded software for our products. The candidate should have a strong understanding of the software development life cycle, embedded systems, and the C programming language.
Key Responsibilities:
• Develop and maintain embedded software for our products
• Design and implement software modules and drivers for embedded systems
• Collaborate with hardware engineers to integrate software and hardware components
• Test and debug embedded software
• Create and maintain technical documentation
• Participate in code reviews and contribute to software architecture and design discussions
• Stay up-to-date with the latest trends and technologies in embedded systems and software development
Requirements:
• Bachelor’s degree in Computer Science, Electrical Engineering, or a related field
• 3 years of experience in embedded software development
• Strong understanding of software development life cycle
• Proficiency in C programming language
• Experience with embedded systems and microcontrollers
• Experience with communication protocols such as SPI, I2C, UART, and CAN
• Familiarity with software development tools such as Git, Jira, and Jenkins
• Strong analytical and problem-solving skills
• Ability to work independently and in a team environment
• Excellent communication and interpersonal skills
Preferred qualifications:
• Degree in Electrical Engineering, or a related field
• Experience with wireless communication protocols such as Bluetooth, LoRa & Wi-Fi
• Knowledge of real-time operating systems such as FreeRTOS, uC/OS-II, or VxWorks
• Experience with Agile software development methodologies
Benefits:
- Health insurance
- Leave encashment
- Paid sick time
- Provident Fund
Job Type: Full Time
Job Location: Perundurai
State Wise: Tamil Nadu
Divison Wise: R & D Division
About Us
Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.
Role Overview
As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.
Key Responsibilities
- Assist with embedded system projects.
- Work with microcontrollers and sensors.
- Develop and test basic firmware.
- Assist with hardware-software integration.
- Debug basic system issues.
- Participate in practical projects.
Requirements
- Basic C/C++ knowledge.
- Understanding of electronics fundamentals.
- Interest in embedded systems.
- Knowledge of microcontrollers is a plus.
- Problem-solving skills.
Perks
- Certificate of Internship
- Flexible work hours
- Mentorship and real project exposure
- Potential for PPO
- Letter of Recommendation
- Performance-Based Stipend available up to ₹18,000/month
C++CKey Responsibilities:
- Develop and customize OpenWrt build systems for operator-specific router distributions
- Build high-performance network stacks and middleware for Wi-Fi 6/7 & 5G-FWA routers
- Implement TR-181/USP/TR-369 device management standards for global operators
- Design scalable, modular embedded Linux systems for complex CPE environments
- Debug and resolve critical issues: kernel panics, memory leaks, race conditions
- Collaborate with hardware and product teams to deliver carrier-grade solutions
Must-Have Skills:
- OpenWrt Proficiency: Customizing build systems, package configurations, feeds
- Programming: Advanced C/C++ for resource-efficient, high-performance networking
- Network Stack & Protocols:
- IPv4/IPv6: Dual-stack, DHCPv4/v6, SLAAC, Prefix Delegation, MAP-T/E, DS-Lite
- L2/L3: Linux Bridge, VLAN 802.1Q/QinQ, SoC hardware offloading
- Routing: Multi-WAN, Failover, Policy-Based Routing, IGMP/MLD Snooping/Proxy
- Device Management: TR-181/TR-098 data models, USP/TR-369 experience
- Debugging: GDB, Valgrind, JTAG, Wireshark, Tcpdump
- System Design: Defining software interfaces & integrating cross-platform middleware
Preferred Qualifications:
- Hands-on with Airoha SDKs & MediaTek WiFi drivers
- Familiarity with RDK-B, prplOS, prplLCM
- QoS/QoE: Traffic Shaping - tc, HTB, FQ_CoDEL, DPI, traffic classification for Gaming/VoIP
- Security: Firewall4/Nftables, Iptables, VPN - WireGuard, IPsec, hardware crypto-acceleration
About Us
Corporate Web Solutions provides technology-focused learning opportunities across software, engineering, automation, and emerging technologies.
Role Overview
As an Embedded Systems Intern, you'll gain practical exposure to embedded development, microcontrollers, sensors, firmware, and hardware-software integration.
Key Responsibilities
- Assist with embedded system projects.
- Work with microcontrollers and sensors.
- Develop and test basic firmware.
- Assist with hardware-software integration.
- Debug basic system issues.
- Participate in practical projects.
Requirements
- Basic C/C++ knowledge.
- Understanding of electronics fundamentals.
- Interest in embedded systems.
- Knowledge of microcontrollers is a plus.
- Problem-solving skills.
Perks
- Certificate of Internship
- Flexible work hours
- Mentorship and real project exposure
- Potential for PPO
- Letter of Recommendation
- Performance-Based Stipend available up to ₹18,000/month
About Nexora Group
Nexora Group is a technology-driven organization focused on innovation in Artificial Intelligence, IoT, Embedded Systems, Robotics, and next-generation digital solutions. We provide aspiring engineers with opportunities to gain practical experience, work on industry-relevant projects, and develop skills that bridge hardware and intelligent software systems.
Internship Overview
Nexora Group is seeking passionate and innovative Embedded Systems with AI Interns to join our technology team. This internship is designed for students and recent graduates interested in embedded programming, IoT development, edge AI, robotics, and intelligent hardware systems. Interns will work on real-world projects involving microcontrollers, sensors, AI-powered devices, and automation solutions.
Key Responsibilities
- Design, develop, and test embedded applications for intelligent systems.
- Work with microcontrollers and development boards such as Arduino, ESP32, STM32, and Raspberry Pi.
- Integrate sensors, actuators, and communication modules into embedded solutions.
- Develop and deploy AI/ML models for edge devices and IoT applications.
- Assist in building smart automation, robotics, and intelligent monitoring systems.
- Debug, optimize, and troubleshoot hardware and firmware issues.
- Collaborate with software and AI teams to integrate machine learning into embedded platforms.
- Document project architecture, testing results, and technical specifications.
- Research emerging technologies in Edge AI, TinyML, IoT, and Embedded Computing.
Required Skills
- Basic understanding of Embedded Systems and Microcontrollers.
- Knowledge of C, C++, or Python programming.
- Familiarity with Arduino IDE, PlatformIO, Raspberry Pi, or similar development environments.
- Understanding of electronics, sensors, and communication protocols (UART, I2C, SPI, MQTT).
- Basic knowledge of Artificial Intelligence and Machine Learning concepts.
- Strong analytical and problem-solving abilities.
- Good communication and teamwork skills.
- Passion for innovation and hardware-software integration.
Preferred Qualifications
- Experience with IoT, Robotics, Automation, or Embedded Projects.
- Familiarity with TensorFlow Lite, TinyML, Edge AI, or Computer Vision applications.
- Knowledge of PCB design, circuit simulation, or hardware prototyping.
- Participation in technical competitions, hackathons, or research projects.
- GitHub portfolio or project demonstrations showcasing embedded or AI work.
Eligibility
- Undergraduate or postgraduate students pursuing Electronics & Communication Engineering (ECE), Electrical Engineering (EE), Computer Science, Embedded Systems, Mechatronics, Robotics, IoT, AI, or related disciplines.
- Recent graduates seeking practical industry exposure.
- Candidates passionate about intelligent hardware systems and emerging technologies.
What You'll Gain
- Hands-on experience with real-world Embedded Systems and AI projects.
- Exposure to IoT, Edge AI, Robotics, and Smart Device development.
- Mentorship from experienced engineers and technology professionals.
- Internship Completion Certificate.
- Letter of Recommendation based on performance.
- Opportunity for a Pre-Placement Offer (PPO) for outstanding performers.
- Professional networking and career growth opportunities.
About Jinn
Jinn is a Voice AI Tech Company. It helps businesses get better RoI specially by helping sales processes with the use of Voice AI Tech. We are adding a business line which includes an audio device that can reliably capture audio in various environments.
About role:
- This Role in a B2B SaaS startup in AI space led by 2X entrepreneurs from IIT, IIMs. Fast paced with a lot of learning and growth.
- Responsibility: Helping engineer/assemble/bring together an IoT/ hardware device that can accomplish product goals with required constraints. Great high stakes exposure for fresh grads
- Duration: 3-6 months internship || Converts to Full Time based on performance
- Compensation (Stipend): 20-25k per month || Full time 4.5lpa - 6LPA
Ideal Profile: Interested in building a career in IoT/Tech, good communication, good discipline, solid understand of tech (AI)
Skill Sets
Look for someone who:
• Has built at least 1 IoT project end-to-end
• Knows Arduino + one of ESP32 / nRF52
• Has touched audio input (even basic)
• Is comfortable debugging hardware (this is key)
1. Embedded Systems Programming (Must-have)
• C/C++ (Arduino framework or ESP-IDF)
• Working with:
* ESP32 OR
* Seeed Studio XIAO BLE nRF52840 Sense
• Skills:
* GPIO, I2S (for mic input)
* Power modes (deep sleep, wake triggers)
* Memory constraints (huge in audio use cases)
👉 This is the backbone. If they can’t do this well, project stalls.
2. Audio Handling + Signal Basics
• Understanding:
* Sampling rate (16kHz vs 44.1kHz)
* PCM audio buffers
* Latency vs quality trade-offs
• Practical skills:
* Using I2S microphones (INMP441, etc.)
* Basic noise filtering
* Voice Activity Detection (VAD)
👉 Without this, you’ll just get noisy unusable recordings.
3. Power & Hardware Basics (Often underestimated)
• LiPo battery handling
• Charging IC (TP4056 type)
• Power optimization:
* Sleep modes
* Sampling intervals
Many prototypes fail here (battery drains in 1 hour 😅)
4. Connectivity (BLE / WiFi)
• BLE (for XIAO nRF52840):
* Data chunking (BLE MTU limits!)
* Pairing + mobile relay model
• WiFi (for ESP32):
* HTTP / WebSocket streaming
* Retry + buffering
Trade
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon