DFT Engineer

Senior hardware engineer - Power electronics

Experience: 5 to 10 years experience

Job Location: Pune

Job Description:

• Design, simulate, and develop a variety of power electronic circuits, including AC-DC, DC-DC converters
• Develop schematics using CAD tools such as Mentor and Altium and collaborate with PCB engineers on layout development.
• Support simulation activities using tools LTspice, or similar, helping to build and analyze design.
• Participate in the prototyping and testing of power electronic circuits and components under guidance.
• Help with the assembly and validation of test setups and perform measurements in the lab.
• Assist in the documentation of design details, test procedures, and results.
• Gain exposure to relevant industry standards and regulatory requirements for power electronics.
• Collaborate with other engineering disciplines to understand system-level requirements and interactions.
• Contribute to root cause analysis of issues encountered during testing or production under supervision.

Experience and Qualifications:

• B.Tech/M.Tech with specialization in Electrical or Electronics Engineering.
• Overall Experience of 5-10 Years.
• Specific experience of 2-4 years of experience in the design and development of power electronic systems like DC-DC converters or chargers.

Must Have Competencies:

• Proficiency in electric circuit design and analysis involving power devices, gate drivers and passive elements.
• Good understanding of common topologies for power converters and inverters.
• Proficiency in Microcontrollers and peripherals like PWM, ADC etc.
• Hardware and firmware debugging skills for troubleshooting.

Good to Have Competencies:

• Experience with non-idealities in power electronic devices like diodes, MOSFETs, transformers and inductors.
• Knowledge of layout and how it impacts performance.
• Knowledge of EMI/EMC compliance and safety standards like UL, VDE, IEC, or BIS.
• Proficiency in simulation and design tools such as LtSpice, PSIM, MATLAB, Allegro, or Hyperlynx.

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

🚨 Hiring Alert 🚨Hiring Alert 🚨 Hiring Alert 🚨 

📌 Job Role: System Integration Engineer (SW Integration)

📍 Location: Bangalore

💼 Experience: Minimum 6 Years

🎓 Qualification: Bachelor’s in Electrical / Computer Engineering

We are looking for an experienced System Integration Engineer to contribute to system integration and testing activities for next-generation vehicle controller & software platforms.

If you have strong expertise in vehicle networks, E/E architecture, and automotive system testing, this opportunity is for you.

🔹 Essential Skills

✅ Strong knowledge of E/E Architecture & Vehicle Networks

✅ Solid understanding of LIN (ISO 17987-1) & CAN (ISO 11898-1)

✅ Basic knowledge of Ethernet (OA TC8) & SOME/IP protocol

✅ Understanding of automotive testing standards (ISTQB preferred)

✅ Agile test tools: Doors Next Gen, IBM RTC, Jira

✅ Programming knowledge: Python, CAPL, C, C++

🔹 Desired Skills

⭐ Experience in CI/CD (GitHub, Artifactory, Conan, TeamCity)

⭐ Exposure to Linux, AUTOSAR, Android, QNX environments

⭐ Model-driven testing (Mockups, PoCs)

⭐ Cybersecurity knowledge – MACSec (IEEE 802.1AE)

⭐ Experience in electrical architecture industrialization

🔹 Experience Required

✔ Minimum 6 years in Systems Engineering / Vehicle Network Development

✔ Experience in sub-system or vehicle-level industrialization

📩 Interested candidates can share their updated CV

📌 Subject Line: Application for System Integration Engineer 

#Hiring #SystemIntegration #SWIntegration

#AutomotiveSoftware #VehicleNetworks

#EEArchitecture #CAN #LIN #SOMEIP

#AUTOSAR #EmbeddedSystems #AutomotiveEngineering

#CI_CD #Python #CAPL #BangaloreJobs

#AutomotiveJobs #TechHiring #EngineeringCareers

#VehicleController #DistributedSystems

DRONES - Engineers, developers - HARDWARE, SOFTWARE, AND DESIGN

Preferred experience - 1 - 5 years

You would be part of:

1. Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
2. Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
3. Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
4. Writing Applications and Drivers from the scratch for (embedded)linux based systems.
5. Scripting and automations around work flows of UAS usage.
6. Working with existing sophisticated software stacks of subcomponents of UASs.
7. Working closely with electronics, design and systems teams for architecture development and deployment.
8. Working closely with Flight Controller engineers to do collaborative development of UAVs.

We expect you to be:

1. Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
2. Very good in analytical abilities to be able to do core research and development activities.
3. Able to write low level drivers (wrapper or core) from the scratch.
4. Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
5. Able to understand existing complex embedded software stack written in C/C++.
6. Solid in C.
7. Good in C++.
8. Comfortable with using hardware debuggers.
9. Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
10. Having Solid understanding of interrupt mechanisms.
11. Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
12. Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
13. Having Good understanding of the concept of bootloaders.
14. Able to multitask.
15. A self-motivated and motivating personality who can work well independently as well as part of a team
16. Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude

You are awesome if you are:

1. Experienced in Linux Device Driver development.
2. Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
3. Experienced in data filtering techniques (Example: Kalman filter)
4. Knowledge in ML/AI
5. capabilities in understanding various drone sectors and adoption

DESIGN : AV/Drone design engineer

Basic Qualifications (Required Skills/Experience):

• Diploma, Bachelor Or Master degree in Mechanical, Aerospace, Aeronautical, Civil disciplines
• Fresher graduates shall be considered for this position based on skillsets and Merit
• 0-5 Years of relevant Work experience.
• Knowledge of structural design, mechanical design, material properties, awareness of Industry standards for structural and mechanical systems design.
• Knowledge of CAD Tools (CATIA, Solid work, Creo, Unigraphics /NX) for Modeling, Drafting & Model Based Definition is essential.
• Able to work under guidance with positive attitude and highest ethics.

Preferred Qualifications (Desired Skills/Experience):

• Good knowledge of New Product development process.
• Knowledge of basics of stress analysis.
• Basic understanding of aircraft and UAV/Drone.

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SYSTEMS ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with multi-disciplinary engineering team and customer to identify and recommend hardware needs and requirements for project/product.
• Modify or assist in the development of software architecture and design for new products, prototype, or re-design, including sourcing build environments and writing technical support and control documentation.   
• Read Block Diagrams and detail circuit schematics and layout of proposed or existing hardware and assess the software and driver requirements.
• Participates in cross-divisional Edge IoT projects and/or proposals.
• Develop, oversee, and document automated tests for electrical hardware design and products as well as final operating drivers and systems.
• Evaluate and investigate product failures, and recommend repair or design modifications based on specifications, cost, resources, and risks.

REQUIREMENTS:

• Ability to creatively approach challenges and cleverly solve difficult problems.
• Ability to independently identify daily design and customer support tasks, self-start and motivate.
• Ability to manage several projects and prioritize appropriately, with minimal supervision.
• Ability to work in a collaborative team environment as well as independently.
• Ability to learn and work in virtual environments (CAD & Hardware build packages) in-which candidate’s skills are low but persevere and overcome skill gaps autonomously.
• Some experience programming with embedded systems designs and multithreaded real-time operating systems is required.
• Solid programming experience. Preferably in C or C++, .NET, and Java programming languages.

EXPERIENCE:

We as a team are looking for freshers or young professionals with (0-4 years of experience) passion and eagerness to create scalable and optimized software systems and execute complete embedded software development lifecycle.

• Experience of a hardware life cycle, ie architecture, design, production+testing to field deployment of at least one hardware product.
• Understanding and working experience of C language with data structures.
• Ability to read the hardware/ functional/ register specs.
• Very good in debugging skills (using dumps, traces, and debuggers).
• Well, verse with Linux operating system (i. e. build environment, Make files, configuration management, shell scripting).
• Experience with PCB level design, and ability to design or review schematics and layouts
• Experience in any wireless networking chipset.
• Automotive/Industrial electronic systems design/validation
• Familiarity with operating system concepts like memory management, process scheduling, synchronization methods.
• Hands-on experience with any real-time operating system.
• Basic understanding of analog (ADCs, sensors, etc) and digital circuits.
• Prior experience in IoT startups.