Windows Virtual Desktop

JOB DESCRIPTION:

Position : Linux BSP developer

Location : Bangalore 

Experience : 3 to 10 Years 

Requirements :

1. 3 to 10 Years of proficiency working on C and Embedded Linux BSP (Board Support Package).
2. Highly proficient and possess working in Linux kernel and Linux device drivers.
3. Hands on experience on working on platform of MIPS, ARM etc.
4. Working knowledge and strong understanding of Device Tree.
5. Understanding of Make files, their customization and Cross Compilation and Shell scripting.
6. Experience in working on U-boot.
7. Video and Camera domain knowledge will be a BIG advantage.
8. Knowledge of secure boot would be an added advantage.

Interested in designing award-winning wearables while managing challenging constraints so that your products are used everyday by millions of users? Then read on..

ULTRAHUMAN • HARDWARE

Hardware Design Engineer Wearables

Bangalore (Kudlu Gate)| • On-site | Full-time |

ABOUT THE ROLE

Ultrahuman's Hardware division builds award-winning wearables the Ultrahuman Ring and Ring Air pushing consumer technology in health and metabolic fitness. We're looking for a Hardware Design Engineer to own electronics design for our next-generation smart rings, from architecture and schematic capture through PCB layout, bring-up, and mass production.

This is a hands-on role at the extremes of miniaturization and power efficiency. You'll make architecture-level component decisions, drive high-density and RF layout, and take designs through NPI to volume — working closely with mechanical, firmware, and manufacturing teams on fast product cycles.

KEY RESPONSIBILITIES

Architecture & Schematic Design

• Translate product requirements into hardware architecture, then into schematics and manufacturable PCB designs using OrCAD / Allegro (Cadence).
• Own component selection across MCU/SoC, PMIC, sensor AFEs, and RF front-ends — balancing size, power, cost, and supply availability.
• Handle schematic-to-layout conversion and netlist import; create and maintain symbol/footprint libraries and land patterns.

High-Density & RF Layout

• Design and review high-density (HDI), rigid, and rigid-flex PCB layouts for space-constrained wearable form factors.
• Design 2.4 GHz BLE antennas and NFC coils, matching networks, and controlled-impedance routing; support antenna tuning and RF validation.
• Apply signal-integrity best practices for high-speed digital interfaces and mixed-signal boards.

Power & Low-Power Design

• Architect power trees around PMICs, buck/boost converters, and LDOs, including Li-ion charging for small-capacity cells.
• Build and validate ultra-low-power current budgets to meet multi-day battery-life targets.
• Strong grasp of power electronics and active/passive component behaviour.

Sensor Integration

• Integrate optical biosensing (PPG) AFEs, IMUs, temperature sensors, and haptics; own I²C/SPI interface design and analog front-end layout.

Manufacturing & DFM

• Own Gerber/ODB++ release, fabrication and assembly drawings, panelization, and full manufacturing data packages.
• Prepare and maintain BOMs; evaluate and qualify alternate / second-source components.
• Drive DFM/DFA reviews with fab and SMT/EMS partners; support NPI through EVT/DVT/PVT to mass production.
• Sound understanding of PCB materials, stackups, and component assembly processes.

Compliance, Reliability & Validation

• Apply EMI/EMC, thermal, and mechanical design best practices.
• Support pre-compliance and certification across FCC, CE, BIS, and RoHS, and familiarity with IEC standards for PCB design safety.
• Coordinate with test engineers on board bring-up and PCB validation; run circuit simulations for RF and signal/timing optimization.

Ownership & Collaboration

• Independently manage hardware projects end-to-end, including vendor coordination and delivery of final hardware.
• Collaborate with mechanical engineers to optimize designs and meet project timelines.
• Bring the latest design tools, methodologies, and industry best practices into the team.

REQUIRED QUALIFICATIONS

• Bachelor's or Master's in EEE, Electronics, or equivalent practical experience.
• 4+ years of hands-on hardware / PCB design experience, ideally in consumer electronics or wearables.
• Proficiency with a leading schematic and PCB toolchain (OrCAD / Allegro preferred).
• Proven track record taking a product from schematic through layout to volume production.
• Working knowledge of power electronics and active/passive component selection.
• Familiarity with global certifications (FCC, CE, BIS, RoHS) and IEC PCB safety standards.

PREFERRED / BONUS

• Experience with miniaturized high-density or rigid-flex designs.
• RF design experience (2.4 GHz / BLE, NFC, antenna tuning and matching).
• EMI/EMC design and pre-compliance testing experience.
• Low-power / battery-operated wearable product experience.
• Familiarity with reliability methods (DFMEA, derating) and RF / signal-timing circuit simulation.

SAP Integration Consultant (Apollo Source Systems to Staging)

• Analyze and understand business requirements, and design and develop appropriate SAP integration

solutions

• Configure and maintain SAP integration solutions from source SAP to staging [for o9

Implementation]

• Troubleshoot and resolve integration issues as they arise

• Develop and maintain technical documentation related to SAP integration solutions

• Participate in cross-functional and project teams to ensure successful integration implementations

• Monitor and analyze system performance, and suggest and implement enhancements

• Stay up to date on current SAP integration technologies

Lifespark Technologies is looking for individuals with a passion for impacting real lives through technology. Lifespark is one of the most promising startups in the Assistive Tech space in India, and has been honoured with several National and International awards. Our mission is to create seamless, persistent and affordable healthcare solutions. If you are someone who is driven to make a real impact in this world, we are your people.

Lifespark is currently building solutions for Parkinson’s Disease, and we are looking for an embedded software lead to join our growing team. You will be working directly with the founders on high impact problems in the Neurological Healthcare domain. You will be solving some of the most fundamental and exciting challenges in the industry and will have the ability to see your insights turned into real products every day

Responsibilities :

1. RTOS based multithreaded software development

2. Building future ready, scalable software architectures

3. Liasing with hardware team to decide project requirements

4. Realtime IoT functionality development on ESP32 platform

5. Integration of third party services for cloud based communications and computation

6. Maintaining and documenting software via git (GitLab)

7. Coordinating releases, setup and maintenance of CI/CD pipelines

8. Managing AWS based backend services, integration with AWS services such as S3,

Sagemaker

9. Firmware security, Flash encryption, Bootloader encryption, secure communications

10. Deep integration with hardware team - stress testing hardware

11. Development of device drivers

12. Software testing and maintenance

Recommended experience :

1. Good command over Linux

2. Familiarity with real time tasks and timing sensitive system design

3. Familiarity with BLE/Wifi/etc IoT communication protocols

4. Familiarity with major third party platforms for cloud and ML/AI integration

5. Testing actual physical outcomes of programmed solutions

6. Deep familiarity with ESP-IDF

Location : IIT Bombay, Mumbai

Working mechanism : In-person

Compensation range : 4-12 lpa + ESOPs

Education: BE / B.Tech- EEE/ECE/E&I/ Instrumentation and Control
Experience: 3-6 years in the graduates.
Minimum 3+ years of experience in Industrial Automation applications for manufacturing environment.

Domain knowledge: In areas of Industrial Automation technology tools – PLC/DCS/SCADA/HMI for Manufacturing in one or more of the following verticals: Chemicals, Glass, Construction products, Automotive, Abrasives, ceramics industries.

Requirements:

• To be part of Digital Manufacturing and Industry 4.0 projects across Saint Gobain group of companies
• Design and develop Industrial automation applications for discrete, process and hybrid Manufacturing
• Experience in working with various Automation OEM or systems Integrators- Rockwell/Siemens/Schneider
• Experience in providing the network architecture for connectivity of PLC/DCS/OPC/HMI for software integration
• Experience in Industrial automation tools- feature selection, product evaluation for cost effective solution
• Expertise in Industrial automation - Best Practices, Industry Standards and integration methodologies
• Experience in various SCADA platforms such as - GE Proficy, Wonderware, Siemens Win CC, RA Factory Talk
• Collaborate with multi-functional teams to provide Industrial Automation solutions for Digital Manufacturing
• Part of end to end project of automation right from design to delivery of the project.

• Perform analysis, design and implementation of assigned projects using sound engineering principles and adhering to business standards, practices, processes, and product / program requirements
• Engage with global teams to effectively translate customer requirements to software requirements and identify potential solutions that are optimized to operate with in constraints of the product
• Troubleshoot variety of complex software problems
• Provide timely status updates and proactive communications on issues to the stakeholders.
• Able to interface with internal and external stake holders regarding software issues.
• Contribute as part of teams put together to meet overall organization initiatives/objectives
• As a technical lead,

1. Guide team efforts towards successful deliverables.
2. Provide technical leadership to teammates through coaching and mentorship.
3. Able to effectively manage escalations and operate under crisis
4. Have the ability and willingness to acquire in-depth understanding of domain and existing products (beyond software) and apply that knowledge to develop new products and to deliver enhancements/ fixes for customer requirements.
   
   

• Background in Industrial Automation
• Prior experience in supervisory control systems software
• Bachelor of Engineering degree in Computer Science/Information Science/Electronics/Electrical/Instrumentation with strong back ground in Industrial automation software
• Strong C, C+ programming on variety of Windows platforms using Microsoft technologies
• Sound knowledge of Computer Science fundamentals data structures, algorithms, operating system concepts
• Excellent analytical skills, methodical problem-solving skills and troubleshooting skills
• Prior experience of working in global teams and interfacing with multiple stake holders
• Excellent communication skills (verbal and written) and the ability to interact with extended teams spread across the globe.

ROLES AND RESPONSIBILITIES:
• Articulate complex problems, communicate viable architecture and design approach in a clear and concise manner.
• Thrive in a collaborative team environment and work with ambiguous product requirements.
• Evaluate opensource technologies, development stack and strive for new learning, continued growth by applying industry best practices and processes.
• Provide thought leadership in cloud based VoIP(Voice/WebRTC) services and bring your passion for technology to motivate and inspire on a day to day basis.

SKILLS REQUIRED
• 4+ years experience in building highly available, fault tolerant and scalable real-time communications(Voice and WebRTC) systems in the cloud (AWS preferred).
• Demonstrated history of building complex, high-performance applications in C/C++.
• Proven expertise in network and system performance optimizations(including kernel, containers and virtualization technologies).
• Proficiency in telecom protocols (SIP, SDP and RTP/RTCP) and internet protocols(IPv4/IPv6, TCP and UDP) is desirable.
• Deep understanding of all aspects of WebRTC from audio codecs, to networking (ICE, STUN, TURN) up to server side components needed to deploy the technology at scale (SFU, MCU, Relays) and network security(TLS, SRTP).Strong analytical, problem solving and troubleshooting skills.
• Programming experience with Python, Golang and Lua will be a plus.
• Prior experience working with Asterisk, FreeSWITCH, RTPEngine, Kamailio, or OpenSIPs will be a plus.