Senior Software Engineer - Embedded Systems

Are you looking for embedded work where "it compiles" isn't good enough it has to survive 5,000+ km and 30+ days underwater without a single reboot? This is hardware and firmware built for zero-margin-for-error conditions. Read on, if you are interested...

Job Title: Lead - Embedded Engineering

Location: Bangalore | Full-Time | Experience: 8-10 Years

About Client Company

Client Company is building autonomous ships and submarines that operate in the world's most hostile environments. We're executing India's flagship autonomous submarine project — the Jalkapi XLAUV — on order from the Indian Navy. This is an unmanned submarine weighing over 20 tons that can travel 5,000+ kilometers autonomously and operate in the ocean for 30+ days at a time.

We're creating some of the largest autonomous robots in the world, machines with direct impact on the global economy and national security. While autonomous cars in India may still be a dream, autonomous ships and submarines are already a reality, and it is possible to build for the world from India.

The Role

·      We are looking for Lead - Embedded Engineering to own the electrical, electronics, power systems, and firmware that bring our autonomous vessels to life. In this role, you will:

·      Own the vessel’s electrical and embedded systems end-to-end — firmware, PCB design, schematics, wiring, and power electronics.

·      Design the electrical and power architecture of the platform, from board level to whole-vessel wiring.

·      Work closely with our mechanical, software, and robotics teams to integrate, bring up, and field-test the platform.

·      This is a rare opportunity to build the embedded and electrical backbone of real-world autonomous platforms that operate in some of the most challenging environments on the planet.

Key Responsibilities

·      Lead & Own the electrical and embedded systems effort — the firmware, electronics, and power systems that run the vessel.

·      Design & Develop PCBs, schematics, and wiring diagrams for the whole vessel, covering compute, power, communication, and sensor/actuator interfaces.

·      Design driving and power-electronics circuits — DC-DC converters, power supplies, electrical isolation, and protection — with due attention to EMI/EMC.

·      Develop & Maintain firmware for microcontrollers and onboard compute, ensuring reliable real-time operation.

·      Integrate sensors and actuators — such as GNSS, INS/AHRS, altimeters, pressure and depth sensors, acoustic modems, thrusters, fins, and battery systems — into the platform.

·      Support hardware bring-up, wiring, and in water testing of the vessel, in coordination with the mechanical and software teams.

·      Drive power management and energy-system design for long-endurance autonomous operation.

·      Plan and conduct compliance and qualification testing of the electronics and power systems — including EMI/EMC, environmental, and related checks — to ensure the platform meets the required standards.

·      Maintain thorough engineering documentation — schematics, wiring diagrams, design records, and test reports — to ensure traceability and supportability across the platform's life.

·      Establish robust electrical and embedded development, review, and testing practices to ensure dependability during trials and at sea.

·      Support field trials (pool, harbour, and sea) — diagnosing and resolving embedded, electrical, and hardware issues on site.

·      Mentor & Guide embedded engineers and uphold engineering best practices.

Required Qualifications

·      8-10 years of hands-on embedded systems experience spanning firmware, hardware, and power electronics.

·      Strong embedded firmware skills for microcontroller-based systems.

·      Strong hardware design skills — schematic capture, multi-layer PCB design, and board debugging.

·      Experience integrating sensors and actuators over interfaces such as UART, SPI, I2C, CAN, and RS-232/485.

·      A working understanding of how device drivers interface with the higher-level software/autonomy stack.

·      Strong debugging skills across hardware and firmware.

Preferred Experience

·      Background in robotics, marine/subsea systems, defense, automotive, or aerospace.

·      Experience with autonomous or unmanned systems.

·      Familiarity with power system design

Why Join Company

·      Build the Hardware That Brings Autonomy to Life: You will build the electrical, electronics, power systems, and firmware that run autonomous vessels across a range of applications — from our flagship Jalkapi XLAUV, a 20-ton submarine travelling 5,000+ kilometres underwater, on platforms operating from the coast to the deep sea. The challenge of building hardware that runs reliably for weeks, beneath the surface, is unlike anything else being built in India.

·      Mission Impact: The electronics and firmware you build are the nervous system of vessels on live missions — including defence and security operations of national importance. Every board you design and every line of firmware you write directly shapes whether the platform performs, and returns safely.

·      Technical Ownership: You will own the embedded and electrical stack from the ground up — hardware, power, firmware, integration, and bring-up.

·      Cross-Disciplinary Work: Work at the intersection of electronics, power, mechanical, software, and robotics. Few embedded roles let you work this close to the full system you help bring to life.

·      Benefits: Compensation benchmarked to top-quartile for the role, health insurance for you and your family and other benefits.

About Monarch: 

At Monarch, we’re leading the digital transformation of farming. Monarch Tractor augments both muscle and mind with fully loaded hardware, software, and service machinery that will spur future generations of farming technologies. 

With our farmer-first mentality, we are building a smart tractor that will enhance (not replace) the existing farm ecosystem, alleviate labor availability, and cost issues, and provide an avenue for competitive organic and beyond farming by providing mechanical solutions to replace harmful chemical solutions. Despite all the cutting-edge technology we will incorporate, our tractor will still plow, till, and haul better than any other tractor in its class. We have all the necessary ingredients to develop, build and scale the Monarch Tractor and digitally transform farming around the world. 

Description: 

We are looking for engineers to work on applied research problems related to control in autonomous driving of electric tractors. The team works on path planning and control to deploy on resource constrained hardware.  

Technical Skills: 

• Necessary Skills: C++, Eigen, Boost, ROS. 
• Solid theoretical knowledge in Linear Algebra and Differential Equations, Control systems, Model Predictive Control, Robotics. 
• Knowledge of some numerical algorithms or libraries among: IPOPT (cppAD), HPIPM would be a plus. 
• Experienced candidates in ROS & C++ projects with no prior control experience willing to apply their knowledge to vision problems are also encouraged to apply. 
• Experience in simulation frameworks such as Gazebo would be a plus. 

Responsibilities: 

• Ability to formulate math for a given problem statement/approach and prototype in C++. 
• Work in conjunction with other sub-systems for integration. 
• Testing/tuning the controller in simulation and on real-world hardware. 
• Communicate and collaborate with team members in India and abroad for the fulfillment of your duties and organizational objectives. 
• Thrive in a fast-paced environment and can complete the assigned sub-task. 

What you will get: 

At Monarch Tractor, you’ll play a key role on a capable, dedicated, high-performing team. Our compensation package includes a competitive salary, excellent health, benefits commensurate with the role you’ll play in our success.  

Technical Lead (Embedded Software - Linux)

Job Responsibilities:

Lead a team of software/Linux development engineers working on microcontroller firmware development, Linux platform drivers and IOT solutions. Should be able to guide team members, resolve technical roadblocks and deliver project commitments. Will be the go-to person and first-level escalation point for all technical issues faced by the team. Looking for someone with 6+ years in the embedded industry and a passion to build a core team in a growing company. Team size will vary from 6 to 12 people, mainly firmware and Linux engineers.

The selected candidate for this role will be reporting to the software director/manager in the organization.

• Work with firmware and application architects to create a project execution plan
• Review project proposals for execution scope & timelines
• Lead embedded software development activities by the team
• Work with QA teams to resolve bugs and ensure release readiness
• Work with h/w design and PM teams to ensure smooth execution and timely delivery of projects

The main responsibilities of this role are:

Technical:

• Strong programming skills (C, C++, assembly)
• Linux development experience (porting & platform drivers)
• Expert-level knowledge of embedded microcontroller & microprocessor-based systems
• Prior experience in delivering critical modules for microcontroller projects
• Good understanding of commonly used embedded communication protocols
• Good understanding of common embedded peripherals, interfaces & sensors
• Experience working on Real-Time systems (RTOS)
• Should be able to quickly learn new technologies and enable the team on the same
• Should be able to work with minimal technical guidance

Leadership:

• This role requires excellent communication skills
• Strong analytical & problem-solving skills
• Should be able to lead junior engineers by providing technical mentoring
• Owns task division, task allocation and tracking within the team
• Require multi-tasking and time management skills
• Prior experience working with overseas clients
• Periodically report progress to management

Other desirable skills:

Knowledge of Python

About Statcon Electronics 

Statcon Electronics India Limited Statcon Electronics India Limited is a company specializing in the field of power electronics since its inception, with its roots going back to 1986. It has held prestigious clientage both nationally and internationally, with ABB, Alstom, BHEL, Indian Air Force, Indian Army, Indian Railways, GAIL, and Indian Oil, to name a few. SEIL has a diverse portfolio, spanning across 4 sectors – Railways, Power, Defence and Solar energy.  

About the position 

We are looking for a multiple embedded software engineers with experience in developing firmware for controlling power electronics systems. Openings are available for senior and principal engineer positions across multiple product streams, and target markets include the Indian subcontinent, Africa and North America. 

Required Technical skills 

• Demonstrated experience in developing embedded firmware for real-time power electronics systems using 16/32 bit ARM microcontrollers (ST Microelectronics preferred).  
• Must have shipped at least 1 major relevant product to the market which meets standard industry specifications. Experience with designing for North American/European markets a plus. 
• Experience with common communication protocols such as SPI, I2C, USB, UART, Bluetooth, Ethernet, RS232, and RS485 
• Experience with peripherals and systems such as ADC, DAC, timer, GPIO, PWM, DMA, NVIC, serial and parallel interfaces, memory, bootloaders and watchdog timers 
• Proficiency in advanced algorithm development using Embedded C 
• Experience with embedded software tools such as editors, assemblers, compilers, debuggers, simulators, emulators and Flash/OTP programmers. 
• Thorough understanding of power electronics topologies and control strategies 
• Good grasp over digital signal processing techniques 
• Ability to read and interpret component datasheets, PCB schematics and layout design 
• Familiarity with using measurement devices such as oscilloscopes, multimeters, function generators and logic analyzers to bring up and debug hardware 
• Demonstrated knowledge of firmware development best practices (code reviews, unit tests, Software Configuration Management, version control using git etc.) 
• Excellent documentation skills, and a good grasp over the English language 
• Comfort in using modern collaborative tools such as Slack/Microsoft Teams, JIRA/Trello/Microsoft Planner, Confluence/Microsoft OneNote and the like. 

Bonus Technical skills 

• Experience using at least one scripting language, preferably Python 
• Experience with designing for North American/European markets 
• Experience with designing for IEC and BIS standards 
• Familiarity with EMI/EMC process 
• Ability to simulate power electronics systems using Simulink/MATLAB or equivalent open-source tools 
• Familiarity with agile software development processes 
• Experience with Linux administration using command line 

Soft skills 

• Ability to mentor junior engineers and generate testing procedures for people of all skill levels 
• Excellent inter-personal skills 
• Strong attention to detail with the ability to work on tight deadlines 
• Team player with the ability to work independently under minimal supervision 
• Excellent problem-solving skills 
• Ability and desire to learn new technologies quickly 

Qualifications 

• Junior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 1 year of industrial experience, or a Bachelor's with 3 years of relevant industrial experience. 
• Senior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 4 years of industrial experience, or a Bachelor's with 6 years of relevant industrial experience. 
• Principal Engineer: A Master's (preferred) in Electrical /Electronics/Computer Engineering with 8 years of industrial experience, or a Bachelor's with 10 years of relevant industrial experience. 

Responsibilities 

• Develop, implement and test cutting-edge algorithms for medium and high-power AC-DC, DC-AC and AC-AC conversion of 1 phase and 3 phase AC systems up to 440 V AC, and DC-DC conversion of systems up to 1000 V DC. 
• Develop sensing and IoT solutions for power electronics embedded systems 
• Convert product requirements into technical specifications for Indian and international markets 
• Cover all stages (pertaining to firmware) of V model for product development 
• Generate technical documentation describing product functioning and test procedures for hand-off to SQA 
• Debug product failures in the field using data-driven analysis techniques 
• Mentor junior engineers 
• Host research talks on emerging technologies within the company 

Statcon Electronics is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, age, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Statcon Electronics is committed to creating a dynamic work environment that values diversity and inclusion, respect and integrity, customer focus, and innovation. For more information, visit www.sindia.co.in. 

We are looking networking professionals with the following skill set,

Experience :6+ years of experience in the networking domain

Key skills:

• Must have 6+ years of experience in C/C++ programming language.
• Knowledge of Go programming language and Python programming language is a big plus.
• Strong background in L4-L7 Internet Protocols TCP, HTTP, HTTP2, GRPC and HTTPS/SSL/TLS.
• Background in Internet security related products such as Web Application Firewalls, API Security Gateways, Reverse Proxies and Forward Proxies
• Proven knowledge of Linux kernel internals (process scheduler, memory management, etc.)
• Experience with eBPF is a plus.
• Hands-on experience in cloud architectures (SaaS, PaaS, IaaS, distributed systems) with continuous delivery
• Familiar with containerization solutions like Docker/Kubernetes etc.
• Familiar with server less technologies such as AWS Lambda.
• Exposure to machine learning technologies and distributed systems is a plus

● Write Effective Codes In C++, Develop Software For Embedded Systems Based On STM32, NRF
● Support And Improve Existing Software
● Prepare Documentation For The Created Software. Qualifications
● Confident Knowledge Of C++ 17, Object-Oriented Programming, Embedded Software Development
● Proficiency With Microcontrollers Of The STM32 And / Or NRF Series
● Experience With RTOS
● Familiarity With Git, Linux
● Technical English
● Knowledge Of Python As An Advantage
● Any Experience With UAS \ UAV \ Drones is much appreciated

Hands-on experience in Autosar methodologies and workflows.

• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.

• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.

• Automotive Product Development Process knowledge (ASpice, ISO26262)

• Experience in one or more of Autosar BSW Modules stacks.

• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.

• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.

• Working knowledge on AUTOSAR ECU software architecture

• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools

• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules

• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes

• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)

Understand the flow of the AUTOSAR software from application till the underlying driver.

Role & Responsibilities

• Strong proficiency in C++ with minimum 2 years of Development
• Knowledge of the STL, containers, algorithms and data
• Good understanding on Design patterns and memory
• Familiarity with debugging tools, such as Valgrind, winDBG, WireShark is an additional advantage.

Desired Experience

• (2-6 Years) of Experience as C++ Developer