IPC Developer (software)

Responsibilities:

IoT Deployment (on-field) and maintenance
Lead assembly, testing, and finalization of IoT products 
Black Box Testing: BLE, WiFi
Integration testing: (IoT, backend, and Android)
Test report and deployment setup documentation
Apply quality engineering principles throughout the Agile product lifecycle.
Collaborate closely with cross-functional teams.

Required qualifications:

2021/2022 passed out B.Tech Graduate in ECE or EEE
Hands-on experience with microcontrollers like Arduino and ESP.
Knowledge of C programming language.
Excellent communication and critical thinking skills.
Good organizational skills and a detail-oriented mindset.
Ability to work in a fast-paced environment with minimal supervision.
Sense of ownership and pride in your performance and its impact on the company’s success.
Team player.
Good time management skills.


Preferred qualifications:

Good understanding of embedded and IoT systems.

Who can apply

Only those candidates should apply who
are available for full-time (in-office)
can start the Job immediately
are from Mumbai
have relevant skills and interests

Summary: 

Hyperspec is building a real time local map for self-driving cars and using cross view localization to enable ubiquitous autonomy. Hyperspec is a VC funded startup.

The principal embedded systems engineer will have deep expertise in embedded systems design, development and worked for years on embedded systems teams. This person is a leader and mentor to junior engineers and shares knowledge about the design and development of embedded systems.

Responsibilities:

• Serves as an expert in all aspects of embedded projects and embedded systems—including designing, developing, testing, and perfecting designs 
• Responsible for updating and working with executive leadership on the development of embedded systems and status of projects 
• Provides guidance and mentoring to other members of the team

Requirements:

• Minimum of bachelors' degree in computer science or engineering
• At least ten years of engineering experience with expertise in software engineering, data structures, and programming techniques
• Deep expertise in C/C++ programming
• Experience with FPGAs, PCB, Xilinx, Altera, or similar SoCs.
• Experience with ISPs, Cameras, Switches a plus.
• Experience in working with real-time operating systems, communications protocols and firmware design.

• Experience in interfaces, IP protocols, and hardware subsystems.
• Experience in working as part of a team and leading teams.

• 32-bit Microcontroller knowledge is essential (ARM Cortex based micro-controllers (STM32).
• Esp32 architecture knowledge is essential.
• Strong experience in C, C++, Free-RTOS
• Strong experience in CUBEMX IDE, MDK Version 5 – Keil, Arduino IDE environment
• Good knowledge in HW and communication protocols like CAN, SPI, UART, I2C, USB 
• Good knowledge in TFT Displays and Sensors is added advantage
• Good knowledge of implementation of motor controls as required, pulse width modulation schemes (PWM).
• Good knowledge of power electronics (TRIACs, MOSFETs, IGBTs, gate drivers) and require protections (Over/under voltage/current).
• Document firmware designs, specifications, test plans, revisions and produce test reports

Summary:

The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams. 

Responsibilities:

• Design and build embedded systems, including embedded system firmware
• Test and debug the systems
• Monitor and maintain the system after development
• Improve system efficiency and stability after development
• Collaborate with customers to create systems based on their needs

Requirements:

• Minimum of a bachelor's degree in computer science or engineering
• Professional experience in embedded systems
• Significant programming experience in C or C++
• Experience in trouble-shooting embedded systems and microcontroller peripherals
• Experience in working in real-time operating systems
• Experience in interfaces, IP protocols, and hardware subsystems
• Proficiency in working with common embedded systems communication protocols
• Strong interpersonal and writing skills
• Ability to work as part of a team
• Exceptional analytical and problem-solving skills
• Self-motivated and passionate about your work and embedded systems
• Always eager to learn and improve

Responsibilities and Duties
The team leader will be leading a team of Hardware engineers, firmware and testing engineers. Being a team leader, you will primarily be responsible for fast and accurate delivery from the team which might even include handholding of team members whenever needed. Embedded team would be responsible for the following:
Hardware Design including

• Circuit design as per design requirements
• Schematic capture in the tool
• CAD layout
• QA/QC/functional testing
• PCB assembling and rework
• Lab inventory management
• Component procurement.

Firmware Design Including

• Firmware Design and architect
• Software Development
• Firmware Testing
• Code management over svn

Other Responsibilities

• The team leader would also be responsible for architecting the system, creating detailed design documents as per requirement and maintaining quality control of all the deliverables.
• The team leader would also be required to create a detailed test plan and list of test cases to be executed and if needed, create proper environment for the same.
• Ownership of the ‘ground up’ design and architecture of embedded software for real time applications.
• Decomposition of designs in to structured modules/functions ready for implementationby yourself and the team.
• Hands on development in C of new ARM based embedded software for a range of products currently under development
• Ensure quality of software using appropriate methods(Code Review, Static Analysis, Unit Test etc.) and application of suitable Coding Standards
• Maintain, update and enhance existing embedded software written in C
• Documentation of software products, development and execution of test plans
• Work closely with other members of the engineering team to assist with the correct choice of processors and supporting hardware

Required Experience, Skills and Qualifications

• Experience of 8+ years in field of embedded systems designing and developement.
• Familiar with usage of various LAB instruments.
• Strong fundamentals of electronics (Digital and analog) are must.
• Well versed with circuit designing and HW debugging
• Analog and Digital Circuit designing: familiarity with micro-controllers, memories, communication interfaces, op-amps, comparators, relays, inductors and capacitors, Handling EMI and Noise issues associated with circuits.
• Understanding of BLE protocols will be required.
• Understanding of scientific methodologies of experimentation, data-gathering and interpretation and hypothesis.
• Understanding of basic architecture, debugging of sensors.
• Experienced in embedded-C coding, memory allocations.
• Experience with any RTOS designing preferably with FreeRTOS at least with Semaphores, SW Timers, synchronisation and event handlings, task handling and prioritization.
• Understanding of micro-controller architecture, programming and debugging methodologies, interrupt-handling.
• Experience with any of the IDEs and debuggers for ARM architecture.
• Basic understanding of assembly programing of ARM architecture
• Understanding of basic peripherals like UART, CAN, I2C, Timers, Counters, PWMs, ADCs, DAC.
• Experience/knowledge in IoT devices (sensor, gateway, cloud) handling.
• Familiarity with CAD tools for schematics and layout generation.
• Experience on MS-Office.
• Familiarity in understanding and creating various test plans and documents.

General Skills Needed/ Requirements:

• Strong knowledge of components and should be able to suggest the team with right componenet
• Candidate must have a knack to use his/her technical knowledge to give it back to society.
• Candidates passionate to bring a change in society will be preferred with no compromise on pay check.
• Candidates must be open to work with communities to get feedback on product features so that products are best fit for social upliftment.
• Candidates must be open to travel to needy communities and should not hesitate to get his/her hands dirty to bring a change to the communities.
• Candidates must find associated with the cause and mission of the company.
• Open to work in open startup culture and give his/her 100%.
• Analytical reasoning and fact-based brainstorming capabilities will be highly preferred.
• Ready to relocate to Gurugram.
• Occasional field visits.

Develop firmware, system software for medical devices\ Automotive ECUs\ IoT edge devices & gateways.  Implement the logic and protocols and communications on 32-bit microcontrollers, configure OS, timers, tasks, interrupts, and communicate with external modems, SoCs, trans-receivers to design, code, and test desired functionality as per customer requirements

Job Requirements :

• Hands-on experience in firmware development using C language
• Hands-on experience in writing low-level device drivers for microcontrollers
• Know of real-time Operating system concepts, tasks, and interrupts’ configuration
• Hands-on experience with in-circuit debuggers
• Knowhow of wired and wireless communication protocols 
• Basic understanding of HW circuits, power supply designs, sensors, and actuators’ interfaces
• Experience in implementing SW development quality processes like ISO 9001 or ASPICE
• Good written and oral communication skills

Xfinito is building a portfolio in new product innovation, product contribution and infrastructure goals while providing individuals and teams the freedom to emphasize specific types of work.

Our work focuses on real –world problems that span the breadth of biomedical engineering, embedded systems, computer science, such as machine and deep learning, data mining, natural language processing, hardware and software performance analysis and much more.

JOB ROLE: EMBEDDED SYSTEMS ENGINEER

ROLES AND RESPONSIBILITIES:

• Work with multi-disciplinary engineering team and customer to identify and recommend hardware needs and requirements for project/product.
• Modify or assist in the development of software architecture and design for new products, prototype, or re-design, including sourcing build environments and writing technical support and control documentation.   
• Read Block Diagrams and detail circuit schematics and layout of proposed or existing hardware and assess the software and driver requirements.
• Participates in cross-divisional Edge IoT projects and/or proposals.
• Develop, oversee, and document automated tests for electrical hardware design and products as well as final operating drivers and systems.
• Evaluate and investigate product failures, and recommend repair or design modifications based on specifications, cost, resources, and risks.

REQUIREMENTS:

• Ability to creatively approach challenges and cleverly solve difficult problems.
• Ability to independently identify daily design and customer support tasks, self-start and motivate.
• Ability to manage several projects and prioritize appropriately, with minimal supervision.
• Ability to work in a collaborative team environment as well as independently.
• Ability to learn and work in virtual environments (CAD & Hardware build packages) in-which candidate’s skills are low but persevere and overcome skill gaps autonomously.
• Some experience programming with embedded systems designs and multithreaded real-time operating systems is required.
• Solid programming experience. Preferably in C or C++, .NET, and Java programming languages.

EXPERIENCE:

We as a team are looking for freshers or young professionals with (0-4 years of experience) passion and eagerness to create scalable and optimized software systems and execute complete embedded software development lifecycle.